Timur Tabi wrote: > UART, for instance, can use a CLK signal, but I wrote the driver to only > support BRGs because there are plenty of them and it's a lot simpler. But > someone, for instance, could wire up his board to want to use external clocks > for some UARTs, and so he'd need to modify the driver.
In the absence of a BRG, the driver should just not support changing the baud rate -- it shouldn't fail to function. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
