Grant Likely wrote: > On 9/4/07, Thomas Gerlach <[EMAIL PROTECTED]> wrote: > >> hi folks, >> >> >> my name is thomas trying to make embedded linux run on a powerpc, but we've >> got special boards here, although we use a xilinx virtex4 fpga... >> >> as you said in the nabble-thread (see subject), i set up edk9.1 software >> platform settings und ran libgen to get the xparameters* files. i copied >> those bsp files into the kernel tree (i use your kernel linux-2.6-virtex >> from git.secretlabs.ca/git). after configuring the kernel settigs, i try >> >> $ make ARCH=ppc CROSS_COMPILE=powerpc-eabi- >> > > You should be using a Linux cross compiler, not powerpc-eabi-. The > Xilinx cross compiler will not work to compile Linux kernels. > > You can build yourself a cross compiler using 'crosstool': > http://www.kegel.org/crosstool. > > Alternately, you can download ELDK: > http://www.denx.de/wiki/view/DULG/ELDKAvailability > > Cheers, > g. > >
hi, thank you much for this hint. this was the last thing i thought of... ;) so long, keep on cross-compiling! :) regards, thomas _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
