On 9/4/07, Thomas Gerlach <[EMAIL PROTECTED]> wrote: > hi folks, > > > my name is thomas trying to make embedded linux run on a powerpc, but we've > got special boards here, although we use a xilinx virtex4 fpga... > > as you said in the nabble-thread (see subject), i set up edk9.1 software > platform settings und ran libgen to get the xparameters* files. i copied > those bsp files into the kernel tree (i use your kernel linux-2.6-virtex from > git.secretlabs.ca/git). after configuring the kernel settigs, i try > > $ make ARCH=ppc CROSS_COMPILE=powerpc-eabi-
You should be using a Linux cross compiler, not powerpc-eabi-. The Xilinx cross compiler will not work to compile Linux kernels. You can build yourself a cross compiler using 'crosstool': http://www.kegel.org/crosstool. Alternately, you can download ELDK: http://www.denx.de/wiki/view/DULG/ELDKAvailability Cheers, g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
