On 1/9/2018 11:56 PM, Stefan Wahren wrote: Hi Stefan,
> Hi Razmik, > >> Razmik Karapetyan <[email protected]> hat am 8. Januar 2018 um >> 13:40 geschrieben: >> >> >> On 12/31/2017 9:19 PM, Stefan Wahren wrote: >> >> Hi Stefan, >> >>>> >>>> Razmik Karapetyan (10): >>>> usb: dwc2: Set AHB burst size to INCR >>> >>> The usage hsotg->params.ahbcfg instead of the defines is a unintended fix >>> for BCM2835. According to the BCM2835 datasheet this register have a >>> different definition. So i like to see this split up. >>> >> >> This patch sets AHB burst size by default to INCR, but it can be >> customized later for each platform by device match table. For BSM you >> have dwc2_set_bcm_params() function. >> >> Patch also uses already calculated value for burst size >> "hsotg->params.ahbcfg" in dwc2_hsotg_core_init_disconnected() >> instead of calculating the same value again. >> >> What kind of problems you see here? > > the problem is there is no AHB burst size on BCM2835. > > Quote from BCM2835 datasheet (p. 204): > > The USB_GAHBCFG register has been adapted. Bits [4:1] which are marked in > the Synopsys > documentation as "Burst Length/Type (HBstLen)" have been used differently. > > Your patch is doing two different things, which should better be split up. So > in case of a revert only one part is affected. > > Stefan > Ok, in that case i will split it up. I will prepare 2 patches, first related to switching from INCR4 to INCR, second related to using ahbcfg parameter in dwc2_hsotg_core_init_disconnected(). Best regards, Razmik >> >>>> usb: dwc2: Define PCGCCTL1 register in hw.h >>>> usb: dwc2: Define Active Clock Gating support bit in GHWCFG4 >>> >>> I think this one should be merged into the first patch which uses this >>> define. >>> >> >> I am ok with this observation, i will change it. >> >> Best regards, >> Razmik > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
