On 12/04/16 11:00, Felipe Balbi wrote: > > Hi, > > Roger Quadros <rog...@ti.com> writes: >> On 11/04/16 16:26, Felipe Balbi wrote: >>> >>> Hi, >>> >>> Roger Quadros <rog...@ti.com> writes: >>>> On 11/04/16 15:23, Felipe Balbi wrote: >>>>> >>>>> Hi, >>>>> >>>>> Roger Quadros <rog...@ti.com> writes: >>>>>> Gadget controller might not be always active during suspend/ >>>>>> resume when we are operating in dual-role/otg mode. >>>>>> Check if we're active and only if we are then perform >>>>>> necessary actions during suspend/resume. >>>>> >>>>> I don't get this. If we're operating in OTG, we should have a gadget >>>>> driver loaded, no ? >>>>> >>>> At boot gadget driver is not automatically loaded. We're still in OTG mode >>>> but OTG state machine hasn't started. >>>> System suspend/resume can still happen. >>>> >>>> User might also load/unload the gadget driver prior to system suspend. >>> >>> good point, this should go in the -rc too. >>> >> But there is no dual-role mode currently so it won't fix any bug yet :). > > this should be a problem even for device-only, right ? > > i) boot-up > ii) modprobe dwc3 > iii) echo mem > /sys/power/state > Indeed. It is applicable for device-only mode as well. I'll send this patch for rc then.
cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
