From: Gregory Herrero <gregory.herr...@intel.com>
Disable controller power and enter hibernation when usb bus is
suspended. A phy driver is required to disable the power of the
controller and detect remote-wakeup or disconnection since the
controller will not be able to detect these in this state.
Once the phy driver detects bus activity, it must call
usb_hcd_resume_root_hub.
Signed-off-by: Gregory Herrero <gregory.herr...@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kau...@intel.com>
---
drivers/usb/dwc2/hcd.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 120 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 997f15e..f470e9c 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1465,11 +1465,17 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg,
u16 windex)
/* Update lx_state */
hsotg->bus_suspended = 1;
- /* Suspend the Phy Clock */
- pcgctl = readl(hsotg->regs + PCGCTL);
- pcgctl |= PCGCTL_STOPPCLK;
- writel(pcgctl, hsotg->regs + PCGCTL);
- udelay(10);
+ /*
+ * If hibernation is supported, Phy clock will be suspended
+ * after registers are backuped.
+ */
+ if (!hsotg->core_params->hibernation) {
+ /* Suspend the Phy Clock */
+ pcgctl = readl(hsotg->regs + PCGCTL);
+ pcgctl |= PCGCTL_STOPPCLK;
+ writel(pcgctl, hsotg->regs + PCGCTL);
+ udelay(10);
+ }
/* For HNP the bus must be suspended for at least 200ms */
if (dwc2_host_is_b_hnp_enabled(hsotg)) {
@@ -2342,17 +2348,124 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ unsigned long flags;
+ int ret = 0;
+ u32 hprt0;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (hsotg->lx_state != DWC2_L0)
+ goto unlock;
+
+ if (!HCD_HW_ACCESSIBLE(hcd))
+ goto unlock;
+
+ if (!hsotg->core_params->hibernation)
+ goto skip_power_saving;
+ /*
+ * Drive USB suspend and disable port Power
+ * if usb bus is not suspended.
+ */
+ if (!hsotg->bus_suspended) {
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_SUSP;
+ hprt0 &= ~HPRT0_PWR;
+ writel(hprt0, hsotg->regs + HPRT0);
+ }
+
+ /* Enter hibernation */
+ ret = dwc2_enter_hibernation(hsotg);
+ if (ret) {
+ if (ret != -ENOTSUPP)
+ dev_err(hsotg->dev,
+ "enter hibernation failed\n");
+ goto skip_power_saving;
+ }
+
+ udelay(100);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ /* Ask phy to be suspended */
+ if (!IS_ERR_OR_NULL(hsotg->uphy))
+ usb_phy_set_suspend(hsotg->uphy, true);
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ /* After entering hibernation, hardware is no more accessible */
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+skip_power_saving:
hsotg->lx_state = DWC2_L2;
- return 0;
+unlock:
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return ret;
}
static int _dwc2_hcd_resume(struct usb_hcd *hcd)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (hsotg->lx_state != DWC2_L2)
+ goto unlock;
+
+ if (!hsotg->core_params->hibernation) {
+ hsotg->lx_state = DWC2_L0;
+ goto unlock;
+ }
+
+ /*
+ * Set HW accessible bit before powering on the controller
+ * since an interrupt may rise.
+ */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ /*
+ * Enable power if not already done.
+ * This must not be spinlocked since duration
+ * of this call is unknown.
+ */
+ if (!IS_ERR_OR_NULL(hsotg->uphy))
+ usb_phy_set_suspend(hsotg->uphy, false);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ /* Exit hibernation */
+ ret = dwc2_exit_hibernation(hsotg, true);
+ if (ret && (ret != -ENOTSUPP))
+ dev_err(hsotg->dev, "exit hibernation failed\n");
hsotg->lx_state = DWC2_L0;
- return 0;
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ if (hsotg->bus_suspended) {
+ spin_lock_irqsave(&hsotg->lock, flags);
+ hsotg->flags.b.port_suspend_change = 1;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ dwc2_port_resume(hsotg);
+ } else {
+ /*
+ * Clear Port Enable and Port Status changes.
+ * Enable Port Power.
+ */
+ writel(HPRT0_PWR | HPRT0_CONNDET |
+ HPRT0_ENACHG, hsotg->regs + HPRT0);
+ /* Wait for controller to detect Port Connect */
+ mdelay(5);
+ }
+
+ return ret;
+unlock:
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return ret;
}
/* Returns the current frame number */
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
