This patch adds .vbus_session callback to usb_gadget_ops. VBUS session
handling is necessary for OTG mode. VBUS control is performed during
OTG finite-state machine state switching.
Signed-off-by: Robert Baldyga <r.bald...@samsung.com>
---
drivers/usb/dwc3/core.h | 1 +
drivers/usb/dwc3/gadget.c | 28 ++++++++++++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index fdab715..e00d46e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -828,6 +828,7 @@ struct dwc3 {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned vbus_session:1;
};
/* --------------------------------------------------------------------------
*/
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8946c32..80e43a6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1475,12 +1475,39 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int
is_on, int suspend)
return 0;
}
+static int dwc3_gadget_vbus_session(struct usb_gadget *g, int is_active)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+
+ /* Mark that the vbus was powered */
+ dwc->vbus_session = !!is_active;
+
+ /*
+ * Check if upper level usb_gadget_driver was already registered with
+ * this udc controller driver (if dwc3_gadget_start was called)
+ */
+ if (dwc->gadget_driver)
+ ret = dwc3_gadget_run_stop(dwc, dwc->vbus_session, false);
+
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
+}
+
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
struct dwc3 *dwc = gadget_to_dwc(g);
unsigned long flags;
int ret;
+ /* Need to wait for vbus_session(on) from otg driver */
+ if (dwc->dotg && !dwc->vbus_session)
+ return 0;
+
is_on = !!is_on;
spin_lock_irqsave(&dwc->lock, flags);
@@ -1657,6 +1684,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
.set_selfpowered = dwc3_gadget_set_selfpowered,
+ .vbus_session = dwc3_gadget_vbus_session,
.pullup = dwc3_gadget_pullup,
.udc_start = dwc3_gadget_start,
.udc_stop = dwc3_gadget_stop,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
