This patch adds ep0 enabling and disabling in dwc3_gadget_run_stop().
It's because this function now it used not only for pullup but also
for VBUS session control - feature used by OTG code during role switching.
In case of role switching ep0 have to be reinitialized, so doing it inside
dwc3_gadget_run_stop() function seems to be simplest solution.
This change allowed also to remove ep0 enable/disable code from
suspend/resume functions as this operation is already done by
dwc3_gadget_run_stop(), which is also called there.
Signed-off-by: Robert Baldyga <r.bald...@samsung.com>
---
drivers/usb/dwc3/gadget.c | 56 +++++++++++++++++++++++------------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 80e43a6..4e73934 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1421,13 +1421,38 @@ static int dwc3_gadget_set_selfpowered(struct
usb_gadget *g,
return 0;
}
+static void dwc3_gadget_enable_irq(struct dwc3 *dwc);
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
+
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
{
u32 reg;
u32 timeout = 500;
+ int ret;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (is_on) {
+ ret = __dwc3_gadget_ep_enable(dwc->eps[0],
+ &dwc3_gadget_ep0_desc, NULL, false, false);
+ if (ret) {
+ dev_err(dwc->dev, "failed to enable %s\n",
+ dwc->eps[0]->name);
+ return ret;
+ }
+
+ ret = __dwc3_gadget_ep_enable(dwc->eps[1],
+ &dwc3_gadget_ep0_desc, NULL, false, false);
+ if (ret) {
+ dev_err(dwc->dev, "failed to enable %s\n",
+ dwc->eps[1]->name);
+ __dwc3_gadget_ep_disable(dwc->eps[0]);
+ return ret;
+ }
+
+ /* begin to receive SETUP packets */
+ dwc->ep0state = EP0_SETUP_PHASE;
+ dwc3_ep0_out_start(dwc);
+
if (dwc->revision <= DWC3_REVISION_187A) {
reg &= ~DWC3_DCTL_TRGTULST_MASK;
reg |= DWC3_DCTL_TRGTULST_RX_DET;
@@ -1442,6 +1467,9 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int
is_on, int suspend)
dwc->pullups_connected = true;
} else {
+ __dwc3_gadget_ep_disable(dwc->eps[0]);
+ __dwc3_gadget_ep_disable(dwc->eps[1]);
+
reg &= ~DWC3_DCTL_RUN_STOP;
if (dwc->has_hibernation && !suspend)
@@ -2804,9 +2832,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
dwc3_gadget_run_stop(dwc, true, true);
}
- __dwc3_gadget_ep_disable(dwc->eps[0]);
- __dwc3_gadget_ep_disable(dwc->eps[1]);
-
dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
return 0;
@@ -2814,28 +2839,9 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
int dwc3_gadget_resume(struct dwc3 *dwc)
{
- struct dwc3_ep *dep;
- int ret;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
- dep = dwc->eps[0];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
- false);
- if (ret)
- goto err0;
-
- dep = dwc->eps[1];
- ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
- false);
- if (ret)
- goto err1;
-
- /* begin to receive SETUP packets */
- dwc->ep0state = EP0_SETUP_PHASE;
- dwc3_ep0_out_start(dwc);
-
dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
if (dwc->pullups_connected) {
@@ -2844,10 +2850,4 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
}
return 0;
-
-err1:
- __dwc3_gadget_ep_disable(dwc->eps[0]);
-
-err0:
- return ret;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
