The current EHCI implementation is prepared to toggle the
PORT_POWER bit to enable or disable a USB-Port. In some
cases this port power can not be toggled by the PORT_POWER
bit but instead i.e. by an external GPIO.
This patch adds an callback to be triggered as well.
The host needs to assign a capable portpower callback.
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
---
drivers/usb/host/ehci-hcd.c | 2 ++
drivers/usb/host/ehci-hub.c | 25 +++++++++++++++++++------
drivers/usb/host/ehci.h | 1 +
include/linux/usb/hcd.h | 1 +
4 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 488a308..063128c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1233,6 +1233,8 @@ void ehci_init_driver(struct hc_driver *drv,
drv->hcd_priv_size += over->extra_priv_size;
if (over->reset)
drv->reset = over->reset;
+ if (over->portpower)
+ drv->portpower = over->portpower;
}
}
EXPORT_SYMBOL_GPL(ehci_init_driver);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 6130b75..2bfe660 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -952,6 +952,11 @@ int ehci_hub_control(
clear_bit(wIndex, &ehci->port_c_suspend);
break;
case USB_PORT_FEAT_POWER:
+
+ /* disable port power by callback */
+ if (hcd->driver->portpower)
+ hcd->driver->portpower(hcd, 0);
+
if (HCS_PPC (ehci->hcs_params))
ehci_writel(ehci, temp & ~PORT_POWER,
status_reg);
@@ -1002,12 +1007,16 @@ int ehci_hub_control(
* power switching; they're allowed to just limit the
* current. khubd will turn the power back on.
*/
- if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
- && HCS_PPC(ehci->hcs_params)) {
- ehci_writel(ehci,
- temp & ~(PORT_RWC_BITS | PORT_POWER),
- status_reg);
- temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) {
+ /* disable port power by callback */
+ if (hcd->driver->portpower)
+ hcd->driver->portpower(hcd, 0);
+
+ if (HCS_PPC(ehci->hcs_params)) {
+ temp &= ~(PORT_RWC_BITS | PORT_POWER);
+ ehci_writel(ehci, temp, status_reg);
+ temp = ehci_readl(ehci, status_reg);
+ }
}
}
@@ -1187,6 +1196,10 @@ int ehci_hub_control(
set_bit(wIndex, &ehci->suspended_ports);
break;
case USB_PORT_FEAT_POWER:
+ /* enable port power by callback */
+ if (hcd->driver->portpower)
+ hcd->driver->portpower(hcd, 1);
+
if (HCS_PPC (ehci->hcs_params))
ehci_writel(ehci, temp | PORT_POWER,
status_reg);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index eee228a..7f48048 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -859,6 +859,7 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd
*ehci, const __hc32 *x)
struct ehci_driver_overrides {
size_t extra_priv_size;
int (*reset)(struct usb_hcd *hcd);
+ int (*portpower)(struct usb_hcd *hcd, int enable);
};
extern void ehci_init_driver(struct hc_driver *drv,
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 485cd5e..3f60acb 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -241,6 +241,7 @@ struct hc_driver {
/* called to init HCD and root hub */
int (*reset) (struct usb_hcd *hcd);
int (*start) (struct usb_hcd *hcd);
+ int (*portpower)(struct usb_hcd *hcd, int enable);
/* NOTE: these suspend/resume calls relate to the HC as
* a whole, not just the root hub; they're for PCI bus glue.
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
