Hi Felipe,

On 03/06/2014 06:03 PM, Felipe Balbi wrote:
> From: Roger Quadros <[email protected]>
> 
> The dra7-usb2 and am437-usb2 bindings have not yet been used.
> Change them to be more elegant.
> 
> Acked-by: Kishon Vijay Abraham I <[email protected]>
> Signed-off-by: Roger Quadros <[email protected]>
> Signed-off-by: Felipe Balbi <[email protected]>
> ---
> 
> Here's updated patch with only Documentation. Tell me if it's ok to apply.
> 
>  Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt 
> b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 41dc132..8694aae 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -9,9 +9,9 @@ Required properties:
>                          e.g. USB2_PHY on OMAP5.
>   "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
>                          e.g. USB3 PHY and SATA PHY on OMAP5.
> - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on
>                          DRA7 platform.

this needs to be "ti,control-phy-usb2-dra7" as it is easer to grep.

I'll send a new series with updated patches for you and tony.

cheers,
-roger

> - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
> + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on
>                          AM437 platform.
>   - reg : Address and length of the register set for the device. It contains
>     the address of "otghs_control" for control-phy-otghs or "power" register
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to