Hi,
On Thursday 06 March 2014 09:33 PM, Felipe Balbi wrote:
From: Roger Quadros <[email protected]>
The dra7-usb2 and am437-usb2 bindings have not yet been used.
Change them to be more elegant.
Acked-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
---
Here's updated patch with only Documentation. Tell me if it's ok to apply.
Looks like Tony had some suggestion for the compatible value.
Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt
b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 41dc132..8694aae 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -9,9 +9,9 @@ Required properties:
e.g. USB2_PHY on OMAP5.
"ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
e.g. USB3 PHY and SATA PHY on OMAP5.
- "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
+ "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on
DRA7 platform.
ti,control-phy-usb2-dra7 here and..
- "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on
+ "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on
AM437 platform.
ti,control-phy-usb2-am437 here.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html