From: Michael Grzeschik <m.grzesc...@pengutronix.de>
This patch makes it possible to set the chipidea udc
into full-speed only mode. It can be set by the oftree
property "force-full-speed".
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
drivers/usb/chipidea/bits.h | 2 ++
drivers/usb/chipidea/core.c | 11 +++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 93efe4e..4c14ab7 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -49,11 +49,13 @@
#define PORTSC_HSP BIT(9)
#define PORTSC_PTC (0x0FUL << 16)
/* PTS and PTW for non lpm version only */
+#define PORTSC_PFSC BIT(24)
#define PORTSC_PTS(d) ((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) :
0))
#define PORTSC_PTW BIT(28)
#define PORTSC_STS BIT(29)
/* DEVLC */
+#define DEVLC_PFSC BIT(23)
#define DEVLC_PSPD (0x03UL << 25)
#define DEVLC_PSPD_HS (0x02UL << 25)
#define DEVLC_PTW BIT(27)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index dcf2a0b..4b8b3e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -73,6 +73,11 @@
#include "host.h"
#include "debug.h"
+/* force full-speed operation */
+static bool full_speed;
+module_param(full_speed, bool, 0444);
+MODULE_PARM_DESC(full_speed, "force full-speed mode");
+
/* Controller register map */
static uintptr_t ci_regs_nolpm[] = {
[CAP_CAPLENGTH] = 0x000UL,
@@ -265,6 +270,12 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
while (hw_read(ci, OP_USBCMD, USBCMD_RST))
udelay(10); /* not RTOS friendly */
+ if (full_speed) {
+ if (ci->hw_bank.lpm)
+ hw_write(ci, OP_PORTSC, DEVLC_PFSC, DEVLC_PFSC);
+ else
+ hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+ }
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
--
1.8.2.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
