On Fri, Feb 15, 2013 at 06:25:00PM -0500, Doug Minett wrote:
> I did some followup on another machine at my disposal running a Debian
> 2.6.32-5-686-bigmem on the same hardware as the Ubuntu box - Dell Poweredge
> T110 II
>
> I plugged Digi in and had the same response as with the Ubuntu box -
> io_edgeport was not loaded/no new devices/same dmesg report.
>
> Then I manually loaded io_edgeport and plugged the Digi in again.
>
> dmesg (after manual load) is a bit different than with Ubuntu:
>
> [29735001.555230] usb 2-1.6: new full speed USB device using ehci_hcd and
> address 65
> [29735001.647709] usb 2-1.6: New USB device found, idVendor=1608,
> idProduct=0288
Ah, this is a new device id, that's why things aren't working. Linux
doesn't know how to control this device.
Perhaps if we add it to the existing io_edgeport driver, it would work,
can you try that?
You can do the following, as root:
- unplug the device
- load the module:
modprobe io_edgeport
- add a new device id:
echo "0x1608 0x0288" >
/sys/bus/usb-serial/drivers/io_edgeport/new_id
- plug the device in.
Let us know if that works or not.
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
