Svetoslav Neykov <svetos...@neykov.name> writes:
> Support host and device usb modes for the chipidea controller in AR933x.
> The controller doesn't support OTG functionality so the platform code
> forces one of the modes based on the state of GPIO13 pin at startup.
Some comments below.
>
> Signed-off-by: Svetoslav Neykov <svetos...@neykov.name>
> ---
> arch/mips/ath79/dev-usb.c | 19 ++++++
> arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 +
> drivers/usb/chipidea/Makefile | 1 +
> drivers/usb/chipidea/ci13xxx_ar933x.c | 73
> ++++++++++++++++++++++++
> 4 files changed, 96 insertions(+)
> create mode 100644 drivers/usb/chipidea/ci13xxx_ar933x.c
>
> diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
> index bd2bc10..52966b3 100644
> --- a/arch/mips/ath79/dev-usb.c
> +++ b/arch/mips/ath79/dev-usb.c
> @@ -174,8 +174,27 @@ static void __init ar913x_usb_setup(void)
> platform_device_register(&ath79_ehci_device);
> }
>
> +static void __init ar933x_usb_setup_ctrl_config(void)
> +{
> + void __iomem *usb_ctrl_base, *usb_config_reg;
> + u32 usb_config;
> +
> + usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
> + usb_config_reg = usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG;
> + usb_config = __raw_readl(usb_config_reg);
> + usb_config &= ~AR933X_USB_CONFIG_HOST_ONLY;
> + __raw_writel(usb_config, usb_config_reg);
> + iounmap(usb_ctrl_base);
> +}
> +
> static void __init ar933x_usb_setup(void)
> {
> + u32 bootstrap;
> +
> + bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
> + if (!(bootstrap & AR933X_BOOTSTRAP_USB_MODE_HOST))
> + ar933x_usb_setup_ctrl_config();
> +
> ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
> mdelay(10);
>
> diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
> b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
> index a5e0f17..13eb2d9 100644
> --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
> +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
> @@ -297,6 +297,7 @@
> #define AR934X_RESET_USB_PHY BIT(4)
> #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
>
> +#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
> #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
>
> #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
> @@ -315,6 +316,8 @@
> #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
> #define AR934X_BOOTSTRAP_DDR1 BIT(0)
>
> +#define AR933X_USB_CONFIG_HOST_ONLY BIT(8)
> +
> #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
> #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
> #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index d92ca32..196b7b4 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
> # Glue/Bridge layers go here
>
> obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_msm.o
> +obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_ar933x.o
The problem is that this will only compile for mips target, so you
should probably change the Makefile to only compile it for mips.
>
> # PCI doesn't provide stubs, need to check
> ifneq ($(CONFIG_PCI),)
> diff --git a/drivers/usb/chipidea/ci13xxx_ar933x.c
> b/drivers/usb/chipidea/ci13xxx_ar933x.c
> new file mode 100644
> index 0000000..046a4b6
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci13xxx_ar933x.c
> @@ -0,0 +1,73 @@
> +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/usb/ulpi.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/chipidea.h>
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "ci.h"
> +
> +static struct ci13xxx_platform_data ci13xxx_ar933x_platdata = {
> + .name = "ci13xxx_ar933x",
> + .flags = 0,
> + .capoffset = DEF_CAPOFFSET
> +};
> +
> +static int __devinit ci13xxx_ar933x_probe(struct platform_device *pdev)
__devinit/__devexit/__devexit_p() are gone from the kernel.
Regards,
--
Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
