The chipidea controller in the AR933x SOC supports both host and device modes 
but not OTG.
Which USB mode is used depends on a pin state (GIPO13) during boot - HIGH for 
host, LOW for device mode.
Currently if both host and device modes are available, the code assumes OTG 
support. Add flags to allow
the platform code for force a specific mode based on the pin state.

Signed-off-by: Svetoslav Neykov <svetos...@neykov.name>
---
 drivers/usb/chipidea/core.c  |   22 +++++++++++++++++-----
 include/linux/usb/chipidea.h |    2 ++
 2 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 3cefb4c..85c72e5 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -398,6 +398,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
        struct resource *res;
        void __iomem    *base;
        int             ret;
+       bool force_host_mode;
+       bool force_device_mode;
 
        if (!dev->platform_data) {
                dev_err(dev, "platform data missing\n");
@@ -459,21 +461,31 @@ static int ci_hdrc_probe(struct platform_device *pdev)
        if (ret)
                dev_info(dev, "doesn't support gadget\n");
 
-       if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
+       force_host_mode = ci->platdata->flags & CI13XXX_FORCE_HOST_MODE;
+       force_device_mode = ci->platdata->flags & CI13XXX_FORCE_DEVICE_MODE;
+       if ((!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) ||
+                       (force_host_mode && !ci->roles[CI_ROLE_HOST]) ||
+                       (force_device_mode && !ci->roles[CI_ROLE_GADGET])) {
                dev_err(dev, "no supported roles\n");
                ret = -ENODEV;
                goto rm_wq;
        }
 
-       if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+       if (!force_host_mode && !force_device_mode &&
+                       ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
                ci->is_otg = true;
                /* ID pin needs 1ms debouce time, we delay 2ms for safe */
                mdelay(2);
                ci->role = ci_otg_role(ci);
        } else {
-               ci->role = ci->roles[CI_ROLE_HOST]
-                       ? CI_ROLE_HOST
-                       : CI_ROLE_GADGET;
+               if (force_host_mode)
+                       ci->role = CI_ROLE_HOST;
+               else if (force_device_mode)
+                       ci->role = CI_ROLE_GADGET;
+               else
+                       ci->role = ci->roles[CI_ROLE_HOST]
+                               ? CI_ROLE_HOST
+                               : CI_ROLE_GADGET;
        }
 
        ret = ci_role_start(ci, ci->role);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 544825d..e6f44d2 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,6 +19,8 @@ struct ci13xxx_platform_data {
 #define CI13XXX_REQUIRE_TRANSCEIVER    BIT(1)
 #define CI13XXX_PULLUP_ON_VBUS         BIT(2)
 #define CI13XXX_DISABLE_STREAMING      BIT(3)
+#define CI13XXX_FORCE_HOST_MODE                BIT(5)
+#define CI13XXX_FORCE_DEVICE_MODE      BIT(6)
 
 #define CI13XXX_CONTROLLER_RESET_EVENT         0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT       1
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to