From: JackyChou <jackyc...@asix.com.tw>
Add a new PID 0x7843 to the driver.
Let the new products be able to set up 3 serial ports with the driver.
Because the development of new product is based on 4 serial ports,
but some users only need 3 serial ports. There is no way to set it from
the hardware, so let the driver set 3 serial ports with PID 0x7843.
Signed-off-by: JackyChou <jackyc...@asix.com.tw>
---
drivers/usb/serial/mos7840.c | 45 ++++++++++++++++++------------------
1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index b42bad85097a..57ef25a2f7bb 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -94,6 +94,7 @@
/* The native mos7840/7820 component */
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7840 0x7840
+#define MOSCHIP_DEVICE_ID_7843 0x7843
#define MOSCHIP_DEVICE_ID_7820 0x7820
#define MOSCHIP_DEVICE_ID_7810 0x7810
/* The native component can have its vendor/device id's overridden
@@ -176,6 +177,7 @@ enum mos7840_flag {
static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -298,15 +300,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port
*port, __u16 reg,
val = val & 0x00ff;
/* For the UART control registers, the application number need
to be Or'ed */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ val |= ((__u16)port->port_number + 2) << 8;
+ else
val |= ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- val |= ((__u16)port->port_number + 1) << 8;
- } else {
- val |= ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -332,15 +329,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port
*port, __u16 reg,
return -ENOMEM;
/* Wval is same as application number */
- if (port->serial->num_ports == 4) {
+ if (port->serial->num_ports == 2 && port->port_number != 0)
+ Wval = ((__u16)port->port_number + 2) << 8;
+ else
Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- if (port->port_number == 0) {
- Wval = ((__u16)port->port_number + 1) << 8;
- } else {
- Wval = ((__u16)port->port_number + 2) << 8;
- }
- }
dev_dbg(&port->dev, "%s application number is %x\n", __func__,
Wval);
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
MCS_RD_RTYPE, Wval, reg, buf,
VENDOR_READ_LENGTH,
@@ -2071,12 +2063,16 @@ static int mos7840_probe(struct usb_serial *serial,
VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
/* For a MCS7840 device GPIO0 must be set to 1 */
- if (buf[0] & 0x01)
- device_type = MOSCHIP_DEVICE_ID_7840;
- else if (mos7810_check(serial))
+ if (buf[0] & 0x01) {
+ if (product == MOSCHIP_DEVICE_ID_7843)
+ device_type = MOSCHIP_DEVICE_ID_7843;
+ else
+ device_type = MOSCHIP_DEVICE_ID_7840;
+ } else if (mos7810_check(serial)) {
device_type = MOSCHIP_DEVICE_ID_7810;
- else
+ } else {
device_type = MOSCHIP_DEVICE_ID_7820;
+ }
kfree(buf);
out:
@@ -2091,7 +2087,10 @@ static int mos7840_calc_num_ports(struct usb_serial
*serial,
int device_type = (unsigned long)usb_get_serial_data(serial);
int num_ports;
- num_ports = (device_type >> 4) & 0x000F;
+ if (device_type == MOSCHIP_DEVICE_ID_7843)
+ num_ports = 3;
+ else
+ num_ports = (device_type >> 4) & 0x000F;
/*
* num_ports is currently never zero as device_type is one of
@@ -2146,7 +2145,7 @@ static int mos7840_port_probe(struct usb_serial_port
*port)
mos7840_port->SpRegOffset = 0x0;
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2) && (serial->num_ports ==
4)) {
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports > 2))
{
mos7840_port->SpRegOffset = 0x8;
mos7840_port->ControlRegOffset = 0x9;
mos7840_port->DcrRegOffset = 0x16;
@@ -2154,7 +2153,7 @@ static int mos7840_port_probe(struct usb_serial_port
*port)
mos7840_port->SpRegOffset = 0xa;
mos7840_port->ControlRegOffset = 0xb;
mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3) && (serial->num_ports ==
4)) {
+ } else if ((mos7840_port->port_num == 3) && (serial->num_ports > 2))
{
mos7840_port->SpRegOffset = 0xa;
mos7840_port->ControlRegOffset = 0xb;
mos7840_port->DcrRegOffset = 0x19;
--
2.17.1
