On Thu, Nov 15, 2012 at 04:34:06PM +0200, Roger Quadros wrote:
> prevents getting clocks that don't exist on the platform.
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> drivers/mfd/omap-usb-host.c | 47
> ++++++++++++++++++++++++++++++++-----------
> 1 files changed, 35 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 44772ae..ad89939 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -94,6 +94,7 @@ struct usbhs_port {
> };
>
> struct usbhs_hcd_omap {
> + int nports;
> struct usbhs_port port[MAX_HS_USB_PORTS];
>
> struct clk *xclk60mhsp1_ck;
> @@ -291,7 +292,7 @@ static int usbhs_runtime_resume(struct device *dev)
> if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
> clk_enable(omap->ehci_logic_fck);
>
> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
> + for (i = 0; i < omap->nports; i++) {
> if (is_ehci_tll_mode(pdata->port_mode[i])) {
> if (omap->port[i].utmi_clk) {
> r = clk_enable(omap->port[i].utmi_clk);
> @@ -320,7 +321,7 @@ static int usbhs_runtime_suspend(struct device *dev)
>
> spin_lock_irqsave(&omap->lock, flags);
>
> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
> + for (i = 0; i < omap->nports; i++) {
> if (is_ehci_tll_mode(pdata->port_mode[i])) {
> if (omap->port[i].utmi_clk)
> clk_disable(omap->port[i].utmi_clk);
> @@ -360,8 +361,6 @@ static void omap_usbhs_init(struct device *dev)
>
> pm_runtime_get_sync(dev);
> spin_lock_irqsave(&omap->lock, flags);
> - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
> - dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
>
> reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
> /* setup ULPI bypass and burst configurations */
> @@ -502,8 +501,32 @@ static int __devinit usbhs_omap_probe(struct
> platform_device *pdev)
> omap->pdata = pdata;
> platform_set_drvdata(pdev, omap);
>
> + pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> + omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
> +
> + /* we need to call runtime suspend before we update omap->nports
> + * to prevent unbalanced clk_disable()
> + */
wrong comment style.
> + pm_runtime_put_sync(dev);
does it *really* need to be a synchronous put ?
> +
> + switch (omap->usbhs_rev) {
> + case OMAP_USBHS_REV1:
> + omap->nports = 3;
> + break;
> + case OMAP_USBHS_REV2:
> + omap->nports = 2;
> + break;
> + default:
> + omap->nports = MAX_HS_USB_PORTS;
> + dev_info(dev,
> + "USB HOST Rev : 0x%d not recognized, assuming %d ports\n",
> + omap->usbhs_rev, omap->nports);
please make this dev_dbg().
> + break;
> + }
> +
> need_logic_fck = false;
> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
> + for (i = 0; i < omap->nports; i++) {
> if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
> is_ehci_hsic_mode(i))
> need_logic_fck |= true;
> @@ -538,7 +561,7 @@ static int __devinit usbhs_omap_probe(struct
> platform_device *pdev)
> goto err_init60m;
> }
>
> - for (i = 0; i < MAX_HS_USB_PORTS; i++) {
> + for (i = 0; i < omap->nports; i++) {
> struct clk *pclk;
> char utmi_clk[] = "usb_host_hs_utmi_px_clk";
>
> @@ -588,8 +611,6 @@ static int __devinit usbhs_omap_probe(struct
> platform_device *pdev)
> }
>
>
> - pm_runtime_enable(dev);
moving this part around isn't part of $SUBJECT aparently.
> -
> omap_usbhs_init(dev);
> ret = omap_usbhs_alloc_children(pdev);
> if (ret) {
> @@ -597,15 +618,15 @@ static int __devinit usbhs_omap_probe(struct
> platform_device *pdev)
> goto err_alloc;
> }
>
> + pr_info("OMAP USB HOST : revision 0x%x, ports %d\n",
> + omap->usbhs_rev, omap->nports);
please remove this pr_info() as it doesn't add anything other than noise
to bootup, IMHO.
> return 0;
>
> err_alloc:
> omap_usbhs_deinit(&pdev->dev);
> -
> - pm_runtime_disable(dev);
> iounmap(omap->uhh_base);
>
> - for (i = 0; i < MAX_HS_USB_PORTS; i++)
> + for (i = 0; i < omap->nports; i++)
> clk_put(omap->port[i].utmi_clk);
>
> clk_put(omap->init_60m_fclk);
> @@ -619,6 +640,8 @@ err_xclk60mhsp2:
> err_xclk60mhsp1:
> clk_put(omap->ehci_logic_fck);
>
> + pm_runtime_disable(dev);
> +
> err_remap:
> kfree(omap);
> return ret;
> @@ -639,7 +662,7 @@ static int __devexit usbhs_omap_remove(struct
> platform_device *pdev)
> pm_runtime_disable(&pdev->dev);
> iounmap(omap->uhh_base);
>
> - for (i = 0; i < MAX_HS_USB_PORTS; i++)
> + for (i = 0; i < omap->nports; i++)
> clk_put(omap->port[i].utmi_clk);
>
> clk_put(omap->init_60m_fclk);
> --
> 1.7.4.1
>
--
balbi
signature.asc
Description: Digital signature
