The main design flow is the same with msm otg driver, that is the id and
vbus interrupt are handled at core driver, others are handled by
individual drivers.
- At former design, when switch usb role from device->host, it will call
udc_stop, it will remove the gadget driver, so when switch role
from host->device, it can't add gadget driver any more.
At new design, when role switch occurs, the gadget just calls
usb_gadget_vbus_disconnect/usb_gadget_vbus_connect as well as
reset controller, it will not free any device/gadget structure
- Add vbus connect and disconnect to core interrupt handler, it can
notify udc driver by calling usb_gadget_vbus_disconnect/usb_gadget_vbus_connect.
- Add otg.c to implement struct usb_otg, in that case, calling
otg_set_peripheral
will not be failed at udc.c. Besides, we enable id interrupt at
ci_hdrc_otg_init.
- Add special case handling, like connecting to host during boot up at device
mode, usb device at the MicroB to A cable at host mode, etc.
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/bits.h | 10 ++
drivers/usb/chipidea/ci.h | 6 +
drivers/usb/chipidea/core.c | 217 +++++++++++++++++++++++++++++++++++++----
drivers/usb/chipidea/otg.c | 60 +++++++++++
drivers/usb/chipidea/otg.h | 6 +
drivers/usb/chipidea/udc.c | 2 +
7 files changed, 284 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index d92ca32..11f513c 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -2,7 +2,7 @@ ccflags-$(CONFIG_USB_CHIPIDEA_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o
-ci_hdrc-y := core.o
+ci_hdrc-y := core.o otg.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o
ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index 050de85..4b6ae3e 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -65,11 +65,21 @@
#define OTGSC_ASVIS BIT(18)
#define OTGSC_BSVIS BIT(19)
#define OTGSC_BSEIS BIT(20)
+#define OTGSC_1MSIS BIT(21)
+#define OTGSC_DPIS BIT(22)
#define OTGSC_IDIE BIT(24)
#define OTGSC_AVVIE BIT(25)
#define OTGSC_ASVIE BIT(26)
#define OTGSC_BSVIE BIT(27)
#define OTGSC_BSEIE BIT(28)
+#define OTGSC_1MSIE BIT(29)
+#define OTGSC_DPIE BIT(30)
+#define OTGSC_INT_EN_BITS (BIT(24) | BIT(25) | BIT(26) \
+ | BIT(27) | BIT(28) | BIT(29) \
+ | BIT(30))
+#define OTGSC_INT_STATUS_BITS (BIT(16) | BIT(17) | BIT(18) \
+ | BIT(19) | BIT(20) | BIT(21) \
+ | BIT(22))
/* USBMODE */
#define USBMODE_CM (0x03UL << 0)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index d738603..d32f932 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -139,6 +139,7 @@ struct ci13xxx {
enum ci_role role;
bool is_otg;
struct work_struct work;
+ struct delayed_work dwork;
struct workqueue_struct *wq;
struct dma_pool *qh_pool;
@@ -164,6 +165,11 @@ struct ci13xxx {
bool global_phy;
struct usb_phy *transceiver;
struct usb_hcd *hcd;
+ /* events handled at ci_role_work */
+#define ID 0
+#define B_SESS_VALID 1
+ unsigned long events;
+ struct usb_otg otg;
};
static inline struct ci_role_driver *ci_role(struct ci13xxx *ci)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index f69d029..b50b77a 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -73,6 +73,7 @@
#include "bits.h"
#include "host.h"
#include "debug.h"
+#include "otg.h"
/* Controller register map */
static uintptr_t ci_regs_nolpm[] = {
@@ -264,25 +265,138 @@ static enum ci_role ci_otg_role(struct ci13xxx *ci)
return role;
}
+#define CI_WAIT_VBUS_STABLE_TIMEOUT 500
/**
- * ci_role_work - perform role changing based on ID pin
- * @work: work struct
+ * ci_wait_vbus_stable
+ * When usb role switches, we need to turn on/off internal vbus
+ * regulaor, sometimes, the real vbus value may not lower fast
+ * enough due to capacitance, and we do want the vbus lower
+ * than 0.8v if it is device mode, and higher than 4.4v, if it
+ * is host mode.
+ *
+ * @low: true, Wait vbus lower than B_SESSION_VALID
+ * : false, Wait vbus higher than A_VBUS_VALID
*/
-static void ci_role_work(struct work_struct *work)
+static void ci_wait_vbus_stable(struct ci13xxx *ci, bool low)
+{
+ unsigned long timeout;
+ u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+ timeout = jiffies + CI_WAIT_VBUS_STABLE_TIMEOUT;
+
+ if (low) {
+ while (otgsc & OTGSC_BSV) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(ci->dev, "wait vbus lower than\
+ B_SESS_VALID timeout!\n");
+ return;
+ }
+ msleep(20);
+ otgsc = hw_read(ci, OP_OTGSC, ~0);
+ }
+ } else {
+ while (!(otgsc & OTGSC_AVV)) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(ci->dev, "wait vbus higher than\
+ A_VBUS_VALID timeout!\n");
+ return;
+ }
+ msleep(20);
+ otgsc = hw_read(ci, OP_OTGSC, ~0);
+ }
+
+ }
+}
+
+static void ci_handle_id_switch(struct ci13xxx *ci)
{
- struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
enum ci_role role = ci_otg_role(ci);
if (role != ci->role) {
dev_dbg(ci->dev, "switching from %s to %s\n",
ci_role(ci)->name, ci->roles[role]->name);
- ci_role_stop(ci);
- ci_role_start(ci, role);
- enable_irq(ci->irq);
+ /* 1. Finish the current role */
+ if (ci->role == CI_ROLE_GADGET) {
+ usb_gadget_vbus_disconnect(&ci->gadget);
+ /* host doesn't care B_SESSION_VALID event */
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIE, ~OTGSC_BSVIE);
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIS, OTGSC_BSVIS);
+ ci->role = CI_ROLE_END;
+ /* reset controller */
+ hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
+ while (hw_read(ci, OP_USBCMD, USBCMD_RST))
+ udelay(10);
+ } else if (ci->role == CI_ROLE_HOST) {
+ ci_role_stop(ci);
+ /* reset controller */
+ hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
+ while (hw_read(ci, OP_USBCMD, USBCMD_RST))
+ udelay(10);
+ }
+
+ /* 2. Turn on/off vbus according to coming role */
+ if (ci_otg_role(ci) == CI_ROLE_GADGET) {
+ otg_set_vbus(&ci->otg, false);
+ ci_wait_vbus_stable(ci, true);
+ } else if (ci_otg_role(ci) == CI_ROLE_HOST) {
+ otg_set_vbus(&ci->otg, true);
+ ci_wait_vbus_stable(ci, false);
+ }
+
+ /* 3. Begin the new role */
+ if (ci_otg_role(ci) == CI_ROLE_GADGET) {
+ ci->role = role;
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIS, OTGSC_BSVIS);
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIE, OTGSC_BSVIE);
+ } else if (ci_otg_role(ci) == CI_ROLE_HOST) {
+ ci_role_start(ci, role);
+ }
}
}
+static void ci_handle_vbus_change(struct ci13xxx *ci)
+{
+ u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+ if (otgsc & OTGSC_BSV)
+ usb_gadget_vbus_connect(&ci->gadget);
+ else
+ usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+ struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
+
+ if (test_bit(ID, &ci->events)) {
+ clear_bit(ID, &ci->events);
+ ci_handle_id_switch(ci);
+ } else if (test_bit(B_SESS_VALID, &ci->events)) {
+ clear_bit(B_SESS_VALID, &ci->events);
+ ci_handle_vbus_change(ci);
+ } else
+ dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+
+ enable_irq(ci->irq);
+}
+
+static void ci_delayed_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct ci13xxx *ci = container_of(dwork, struct ci13xxx, dwork);
+ u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+ /* Handle the situation that usb device at the MicroB to A cable */
+ if (ci->is_otg && !(otgsc & OTGSC_ID))
+ otg_set_vbus(&ci->otg, true);
+
+}
+
static ssize_t show_role(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -321,19 +435,36 @@ static irqreturn_t ci_irq(int irq, void *data)
irqreturn_t ret = IRQ_NONE;
u32 otgsc = 0;
- if (ci->is_otg)
- otgsc = hw_read(ci, OP_OTGSC, ~0);
+ otgsc = hw_read(ci, OP_OTGSC, ~0);
- if (ci->role != CI_ROLE_END)
- ret = ci_role(ci)->irq(ci);
-
- if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
+ /*
+ * Handle id change interrupt, it indicates device/host function
+ * switch.
+ */
+ if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+ set_bit(ID, &ci->events);
hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
disable_irq_nosync(ci->irq);
queue_work(ci->wq, &ci->work);
- ret = IRQ_HANDLED;
+ return IRQ_HANDLED;
}
+ /*
+ * Handle vbus change interrupt, it indicates device connection
+ * and disconnection events.
+ */
+ if ((otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
+ set_bit(B_SESS_VALID, &ci->events);
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIS, OTGSC_BSVIS);
+ disable_irq_nosync(ci->irq);
+ queue_work(ci->wq, &ci->work);
+ return IRQ_HANDLED;
+ }
+
+ /* Handle device/host interrupt */
+ if (ci->role != CI_ROLE_END)
+ ret = ci_role(ci)->irq(ci);
+
return ret;
}
@@ -397,6 +528,7 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
struct resource *res;
void __iomem *base;
int ret;
+ u32 otgsc;
if (!dev->platform_data) {
dev_err(dev, "platform data missing\n");
@@ -421,6 +553,7 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
return -ENOMEM;
}
+ ci->events = 0;
ci->dev = dev;
ci->platdata = dev->platform_data;
if (ci->platdata->phy)
@@ -442,12 +575,20 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
return -ENODEV;
}
- INIT_WORK(&ci->work, ci_role_work);
+ INIT_WORK(&ci->work, ci_otg_work);
+ INIT_DELAYED_WORK(&ci->dwork, ci_delayed_work);
ci->wq = create_singlethread_workqueue("ci_otg");
if (!ci->wq) {
dev_err(dev, "can't create workqueue\n");
return -ENODEV;
}
+ /* Disable all interrupts bits */
+ hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+ hw_write(ci, OP_OTGSC, OTGSC_INT_EN_BITS, ~OTGSC_INT_EN_BITS);
+
+ /* Clear all interrupts status bits*/
+ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+ hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, OTGSC_INT_STATUS_BITS);
/* initialize role(s) before the interrupt is requested */
ret = ci_hdrc_host_init(ci);
@@ -465,6 +606,7 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
}
if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+ dev_info(dev, "support otg\n");
ci->is_otg = true;
/* ID pin needs 1ms debouce time, we delay 2ms for safe */
mdelay(2);
@@ -475,13 +617,53 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
: CI_ROLE_GADGET;
}
+ if (ci->is_otg) {
+ /* if otg is supported, create struct usb_otg */
+ ci_hdrc_otg_init(ci);
+
+ /*
+ * If it is host role at otg port, start gadget role first
+ * as we need to allocate device struct.
+ */
+ if (ci->role == CI_ROLE_HOST) {
+
+ ret = ci_role_start(ci, CI_ROLE_GADGET);
+ if (ret) {
+ dev_err(dev, "can't start gadget role,
ret=%d\n",
+ ret);
+ ret = -ENODEV;
+ goto rm_wq;
+ }
+
+ usb_gadget_vbus_disconnect(&ci->gadget);
+ /* host doesn't care B_SESSION_VALID event */
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIE, ~OTGSC_BSVIE);
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIS, OTGSC_BSVIS);
+ ci->role = CI_ROLE_HOST;
+ }
+ msleep(20);
+ }
+
ret = ci_role_start(ci, ci->role);
if (ret) {
- dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
+ dev_err(dev, "can't start %s role, ret=%d\n",
+ ci_role(ci)->name, ret);
ret = -ENODEV;
goto rm_wq;
}
+ otgsc = hw_read(ci, OP_OTGSC, ~0);
+ /*
+ * if it is device mode:
+ * - Enable vbus detect
+ * - If it has already connected to host, notify udc
+ */
+ if (ci->role == CI_ROLE_GADGET) {
+ hw_write(ci, OP_OTGSC, OTGSC_BSVIE, OTGSC_BSVIE);
+ if (otgsc & OTGSC_BSV)
+ usb_gadget_vbus_connect(&ci->gadget);
+ }
+
platform_set_drvdata(pdev, ci);
ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
ci);
@@ -492,8 +674,7 @@ static int __devinit ci_hdrc_probe(struct platform_device
*pdev)
if (ret)
goto rm_attr;
- if (ci->is_otg)
- hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
+ queue_delayed_work(ci->wq, &ci->dwork, msecs_to_jiffies(500));
return ret;
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
new file mode 100644
index 0000000..cc2864f
--- /dev/null
+++ b/drivers/usb/chipidea/otg.c
@@ -0,0 +1,60 @@
+/*
+ * otg.c - ChipIdea USB IP core OTG driver
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Peter Chen
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "host.h"
+#include "debug.h"
+
+static int ci_otg_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *periph)
+{
+ otg->gadget = periph;
+
+ return 0;
+}
+
+static int ci_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->host = host;
+
+ return 0;
+}
+
+/**
+ * ci_hdrc_otg_init - initialize device related bits
+ * ci: the controller
+ *
+ * This function create otg struct, if the device can switch between
+ * device and host.
+ */
+int ci_hdrc_otg_init(struct ci13xxx *ci)
+{
+ /* Useless at current */
+ ci->otg.set_peripheral = ci_otg_set_peripheral;
+ ci->otg.set_host = ci_otg_set_host;
+ ci->transceiver->otg = &ci->otg;
+ hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
+
+ return 0;
+}
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
new file mode 100644
index 0000000..b4c6b3e
--- /dev/null
+++ b/drivers/usb/chipidea/otg.h
@@ -0,0 +1,6 @@
+#ifndef __DRIVERS_USB_CHIPIDEA_OTG_H
+#define __DRIVERS_USB_CHIPIDEA_OTG_H
+
+int ci_hdrc_otg_init(struct ci13xxx *ci);
+
+#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index d214448..b52cb10 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1371,6 +1371,7 @@ static int ci13xxx_vbus_session(struct usb_gadget
*_gadget, int is_active)
pm_runtime_get_sync(&_gadget->dev);
hw_device_reset(ci, USBMODE_CM_DC);
hw_device_state(ci, ci->ep0out->qh.dma);
+ dev_dbg(ci->dev, "Connected to host\n");
} else {
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
@@ -1378,6 +1379,7 @@ static int ci13xxx_vbus_session(struct usb_gadget
*_gadget, int is_active)
CI13XXX_CONTROLLER_STOPPED_EVENT);
_gadget_stop_activity(&ci->gadget);
pm_runtime_put_sync(&_gadget->dev);
+ dev_dbg(ci->dev, "disconnected from host\n");
}
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
