[PATCH v2 10/26] qedf: Check for link state before processing LL2 packets and send fipvlan retries.

[Saurav Kashyap]

- Check if link is UP before sending and processing any packets on wire.

Signed-off-by: Saurav Kashyap <skash...@marvell.com>
---
 drivers/scsi/qedf/qedf_fip.c  |  6 ++++++
 drivers/scsi/qedf/qedf_main.c | 28 ++++++++++++++++++++++------
 2 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_fip.c b/drivers/scsi/qedf/qedf_fip.c
index 3fd3af7..e669679 100644
--- a/drivers/scsi/qedf/qedf_fip.c
+++ b/drivers/scsi/qedf/qedf_fip.c
@@ -95,6 +95,12 @@ static void qedf_fcoe_process_vlan_resp(struct qedf_ctx 
*qedf,
                rlen -= dlen;
        }
 
+       if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) {
+               QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC,
+                         "Dropping VLAN response as link is down.\n");
+               return;
+       }
+
        QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "VLAN response, "
                   "vid=0x%x.\n", vid);
 
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index dee6fef..f84552e 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -124,21 +124,24 @@ static bool qedf_initiate_fipvlan_req(struct qedf_ctx 
*qedf)
 {
        int rc;
 
-       if (atomic_read(&qedf->link_state) != QEDF_LINK_UP) {
-               QEDF_ERR(&(qedf->dbg_ctx), "Link not up.\n");
-               return  false;
-       }
-
        while (qedf->fipvlan_retries--) {
+               /* This is to catch if link goes down during fipvlan retries */
+               if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) {
+                       QEDF_ERR(&qedf->dbg_ctx, "Link not up.\n");
+                       return false;
+               }
+
                if (qedf->vlan_id > 0)
                        return true;
+
                QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,
                           "Retry %d.\n", qedf->fipvlan_retries);
                init_completion(&qedf->fipvlan_compl);
                qedf_fcoe_send_vlan_req(qedf);
                rc = wait_for_completion_timeout(&qedf->fipvlan_compl,
                    1 * HZ);
-               if (rc > 0) {
+               if (rc > 0 &&
+                   (atomic_read(&qedf->link_state) == QEDF_LINK_UP)) {
                        fcoe_ctlr_link_up(&qedf->ctlr);
                        return true;
                }
@@ -159,6 +162,12 @@ static void qedf_handle_link_update(struct work_struct 
*work)
                rc = qedf_initiate_fipvlan_req(qedf);
                if (rc)
                        return;
+
+               if (atomic_read(&qedf->link_state) != QEDF_LINK_UP) {
+                       qedf->vlan_id = 0;
+                       return;
+               }
+
                /*
                 * If we get here then we never received a repsonse to our
                 * fip vlan request so set the vlan_id to the default and
@@ -2412,6 +2421,13 @@ static int qedf_ll2_rx(void *cookie, struct sk_buff *skb,
        struct qedf_ctx *qedf = (struct qedf_ctx *)cookie;
        struct qedf_skb_work *skb_work;
 
+       if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) {
+               QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_LL2,
+                         "Dropping frame as link state is down.\n");
+               kfree_skb(skb);
+               return 0;
+       }
+
        skb_work = kzalloc(sizeof(struct qedf_skb_work), GFP_ATOMIC);
        if (!skb_work) {
                QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate skb_work so "
-- 
1.8.3.1