Hi,
This patch looks good. Please consider this patch as Ack-by: Sreekanth Reddy
<sreekanth.re...@broadcom.com>
Thanks,
Sreekanth
On Thu, May 26, 2016 at 12:44 AM, Joe Lawrence <joe.lawre...@stratus.com> wrote:
> In _scsih_sas_host_add, the number of HBA phys are determined and then
> later used to allocate an array of struct _sas_phy's. If the routine
> sets ioc->sas_hba.num_phys, but then fails to allocate the
> ioc->sas_hba.phy array (by kcalloc error or other intermediate
> error/exit path), ioc->sas_hba is left in a dangerous state: all readers
> of ioc->sas_hba.phy[] do so by indexing it from 0..ioc->sas_hba.num_phys
> without checking that the space was ever allocated.
>
> Modify _scsih_sas_host_add to set ioc->sas_hba.num_phys only after
> successfully allocating ioc->sas_hba.phy[].
>
> Signed-off-by: Joe Lawrence <joe.lawre...@stratus.com>
> ---
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index f2139e5604a3..6e36d20c9e0b 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -4893,13 +4893,22 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
> u16 ioc_status;
> u16 sz;
> u8 device_missing_delay;
> + u8 num_phys;
>
> - mpt3sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
> - if (!ioc->sas_hba.num_phys) {
> + mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
> + if (!num_phys) {
> pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
> ioc->name, __FILE__, __LINE__, __func__);
> return;
> }
> + ioc->sas_hba.phy = kcalloc(num_phys,
> + sizeof(struct _sas_phy), GFP_KERNEL);
> + if (!ioc->sas_hba.phy) {
> + pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
> + ioc->name, __FILE__, __LINE__, __func__);
> + goto out;
> + }
> + ioc->sas_hba.num_phys = num_phys;
>
> /* sas_iounit page 0 */
> sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
> *
> @@ -4959,13 +4968,6 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
> MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
>
> ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
> - ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
> - sizeof(struct _sas_phy), GFP_KERNEL);
> - if (!ioc->sas_hba.phy) {
> - pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
> - ioc->name, __FILE__, __LINE__, __func__);
> - goto out;
> - }
> for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
> if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
> i))) {
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
