On Sun, 29 Nov 2015, Geert Uytterhoeven wrote:
> If an ISA access takes 8 us, while the CPU runs at 1 GHz, i.e. 500M
> loops/s, the difference will be huge.
Ondrej showed that an ISA access can take about 1.6 us. I don't know what
to make of the "8 uS" comment in the mainline driver. Maybe it was an even
slower ISA card.
Anyway, I made a measurement on my hardware and confirmed that lpj is a
very bad proxy for device register access throughput. The "loops per
access" gap is several orders of magnitude:
lpj HZ access time (us) lpa
------------------------------------------------------------------------
Ondrej's 5380 ISA card (PC): 4797252 250 1.6 1.9k
My DMX3191D PCI card (PowerMac): 167079 100 0.42 7.0
>
> Perhaps you can calibrate an NCR5380_read() loop at driver init time,
> and use the calibration value later?
I had the same idea but I didn't think that the complexity was justified
by the low precision requirement. But now that I have some timings I have
to agree.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
