Move shpnt common code to the top, remove base_io, use pci_resource_len.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/scsi/atp870u.c | 65 +++++++++++++++++++++---------------------------
1 file changed, 28 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index f92eb00..8af51a9 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1245,7 +1245,7 @@ static int atp870u_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
{
unsigned char k, m, c;
unsigned long flags;
- unsigned int base_io, error,n;
+ unsigned int error,n;
unsigned char host_id;
struct Scsi_Host *shpnt = NULL;
struct atp_unit *atpdev;
@@ -1278,21 +1278,24 @@ static int atp870u_probe(struct pci_dev *pdev, const
struct pci_device_id *ent)
atpdev->pdev = pdev;
pci_set_drvdata(pdev, atpdev);
- base_io = pci_resource_start(pdev, 0);
- base_io &= 0xfffffff8;
- atpdev->baseport = base_io;
+ shpnt->io_port = pci_resource_start(pdev, 0);
+ shpnt->io_port &= 0xfffffff8;
+ shpnt->n_io_port = pci_resource_len(pdev, 0);
+ atpdev->baseport = shpnt->io_port;
+ shpnt->unique_id = shpnt->io_port;
+ shpnt->irq = pdev->irq;
if ((ent->device == ATP880_DEVID1)||(ent->device == ATP880_DEVID2)) {
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);//JCC082803
- atpdev->ioport[0] = base_io + 0x40;
- atpdev->pciport[0] = base_io + 0x28;
+ atpdev->ioport[0] = shpnt->io_port + 0x40;
+ atpdev->pciport[0] = shpnt->io_port + 0x28;
host_id = atp_readb_base(atpdev, 0x39);
host_id >>= 0x04;
printk(KERN_INFO " ACARD AEC-67160 PCI Ultra3 LVD Host
Adapter:"
- " IO:%x, IRQ:%d.\n", base_io, pdev->irq);
+ " IO:%lx, IRQ:%d.\n", shpnt->io_port, shpnt->irq);
atpdev->dev_id = ent->device;
atpdev->host_id[0] = host_id;
@@ -1358,9 +1361,9 @@ flash_ok_880:
goto unregister;
}
- err = request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED,
"atp880i", shpnt);
+ err = request_irq(shpnt->irq, atp870u_intr_handle, IRQF_SHARED,
"atp880i", shpnt);
if (err) {
- printk(KERN_ERR "Unable to allocate IRQ%d for Acard
controller.\n", pdev->irq);
+ printk(KERN_ERR "Unable to allocate IRQ%d for Acard
controller.\n", shpnt->irq);
goto free_tables;
}
@@ -1381,20 +1384,16 @@ flash_ok_880:
atp_writeb_base(atpdev, 0x38, 0xb0);
shpnt->max_id = 16;
shpnt->this_id = host_id;
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0x60; /* Number of bytes of I/O space
used */
- shpnt->irq = pdev->irq;
} else if (ent->device == ATP885_DEVID) {
- printk(KERN_INFO " ACARD AEC-67162 PCI Ultra3 LVD
Host Adapter: IO:%x, IRQ:%d.\n"
- , base_io, pdev->irq);
+ printk(KERN_INFO " ACARD AEC-67162 PCI Ultra3 LVD
Host Adapter: IO:%lx, IRQ:%d.\n"
+ , shpnt->io_port, shpnt->irq);
atpdev->pdev = pdev;
atpdev->dev_id = ent->device;
- atpdev->ioport[0] = base_io + 0x80;
- atpdev->ioport[1] = base_io + 0xc0;
- atpdev->pciport[0] = base_io + 0x40;
- atpdev->pciport[1] = base_io + 0x50;
+ atpdev->ioport[0] = shpnt->io_port + 0x80;
+ atpdev->ioport[1] = shpnt->io_port + 0xc0;
+ atpdev->pciport[0] = shpnt->io_port + 0x40;
+ atpdev->pciport[1] = shpnt->io_port + 0x50;
if (atp870u_init_tables(shpnt) < 0) {
err = -ENOMEM;
@@ -1404,7 +1403,7 @@ flash_ok_880:
#ifdef ED_DBGP
printk("request_irq() shpnt %p hostdata %p\n", shpnt, atpdev);
#endif
- err = request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED,
"atp870u", shpnt);
+ err = request_irq(shpnt->irq, atp870u_intr_handle, IRQF_SHARED,
"atp870u", shpnt);
if (err) {
printk(KERN_ERR "Unable to allocate IRQ for
Acard controller.\n");
goto free_tables;
@@ -1516,11 +1515,6 @@ flash_ok_885:
shpnt->max_lun = (atpdev->global_map[0] & 0x07) + 1;
shpnt->max_channel = 1;
shpnt->this_id = atpdev->host_id[0];
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0xff; /* Number of bytes of I/O space
used */
- shpnt->irq = pdev->irq;
-
} else {
bool wide_chip =
(ent->device == PCI_DEVICE_ID_ARTOP_AEC7610 &&
@@ -1530,10 +1524,10 @@ flash_ok_885:
error = pci_read_config_byte(pdev, 0x49, &host_id);
printk(KERN_INFO " ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host
Adapter: "
- "IO:%x, IRQ:%d.\n", base_io, pdev->irq);
+ "IO:%lx, IRQ:%d.\n", shpnt->io_port, shpnt->irq);
- atpdev->ioport[0] = base_io;
- atpdev->pciport[0] = base_io + 0x20;
+ atpdev->ioport[0] = shpnt->io_port;
+ atpdev->pciport[0] = shpnt->io_port + 0x20;
atpdev->dev_id = ent->device;
host_id &= 0x07;
atpdev->host_id[0] = host_id;
@@ -1553,9 +1547,9 @@ flash_ok_885:
goto unregister;
}
- err = request_irq(pdev->irq, atp870u_intr_handle, IRQF_SHARED,
"atp870i", shpnt);
+ err = request_irq(shpnt->irq, atp870u_intr_handle, IRQF_SHARED,
"atp870i", shpnt);
if (err) {
- printk(KERN_ERR "Unable to allocate IRQ%d for Acard
controller.\n", pdev->irq);
+ printk(KERN_ERR "Unable to allocate IRQ%d for Acard
controller.\n", shpnt->irq);
goto free_tables;
}
@@ -1579,13 +1573,10 @@ flash_ok_885:
atp_writeb_base(atpdev, 0x3b, atp_readb_base(atpdev, 0x3b) |
0x20);
shpnt->max_id = wide_chip ? 16 : 8;
shpnt->this_id = host_id;
- shpnt->unique_id = base_io;
- shpnt->io_port = base_io;
- shpnt->n_io_port = 0x40; /* Number of bytes of I/O space
used */
- shpnt->irq = pdev->irq;
+
}
spin_unlock_irqrestore(shpnt->host_lock, flags);
- if (!request_region(base_io, shpnt->n_io_port, "atp870u")) {
+ if (!request_region(shpnt->io_port, shpnt->n_io_port,
"atp870u")) {
err = -EBUSY;
goto request_io_fail;
}
@@ -1600,10 +1591,10 @@ flash_ok_885:
scsi_add_fail:
printk("atp870u_prob:scsi_add_fail\n");
- release_region(base_io, shpnt->n_io_port);
+ release_region(shpnt->io_port, shpnt->n_io_port);
request_io_fail:
printk("atp870u_prob:request_io_fail\n");
- free_irq(pdev->irq, shpnt);
+ free_irq(shpnt->irq, shpnt);
free_tables:
printk("atp870u_prob:free_table\n");
atp870u_free_tables(shpnt);
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
