tscam() is using port 0x80 access for delays but that's x86-only.
Use udelay(2) instead.
Signed-off-by: Ondrej Zary <li...@rainbow-software.org>
---
drivers/scsi/atp870u.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index bccf872..c4a59cc 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1036,7 +1036,7 @@ static void tscam(struct Scsi_Host *host)
atp_writeb_io(dev, 0, 0x02, 0x7f);
atp_writeb_io(dev, 0, 0x1b, 0x02);
- outb(0, 0x80);
+ udelay(2);
val = 0x0080; /* bsy */
atp_writew_io(dev, 0, 0x1c, val);
@@ -1044,7 +1044,7 @@ static void tscam(struct Scsi_Host *host)
atp_writew_io(dev, 0, 0x1c, val);
val |= 0x0004; /* msg */
atp_writew_io(dev, 0, 0x1c, val);
- inb(0x80); /* 2 deskew delay(45ns*2=90ns) */
+ udelay(2); /* 2 deskew delay(45ns*2=90ns) */
val &= 0x007f; /* no bsy */
atp_writew_io(dev, 0, 0x1c, val);
mdelay(128);
@@ -1052,7 +1052,7 @@ static void tscam(struct Scsi_Host *host)
atp_writew_io(dev, 0, 0x1c, val);
while ((atp_readb_io(dev, 0, 0x1c) & 0x04) != 0)
;
- outb(1, 0x80);
+ udelay(2);
udelay(100);
for (n = 0; n < 0x30000; n++)
if ((atp_readb_io(dev, 0, 0x1c) & 0x80) != 0) /* bsy ? */
@@ -1060,13 +1060,13 @@ static void tscam(struct Scsi_Host *host)
if (n < 0x30000)
for (n = 0; n < 0x30000; n++)
if ((atp_readb_io(dev, 0, 0x1c) & 0x81) == 0x0081) {
- inb(0x80);
+ udelay(2);
val |= 0x8003; /* io,cd,db7 */
atp_writew_io(dev, 0, 0x1c, val);
- inb(0x80);
+ udelay(2);
val &= 0x00bf; /* no sel */
atp_writew_io(dev, 0, 0x1c, val);
- outb(2, 0x80);
+ udelay(2);
break;
}
while (1) {
@@ -1093,18 +1093,18 @@ static void tscam(struct Scsi_Host *host)
val &= 0x00ff; /* synchronization */
val |= 0x3f00;
fun_scam(dev, &val);
- outb(3, 0x80);
+ udelay(2);
val &= 0x00ff; /* isolation */
val |= 0x2000;
fun_scam(dev, &val);
- outb(4, 0x80);
+ udelay(2);
i = 8;
j = 0;
while (1) {
if ((atp_readw_io(dev, 0, 0x1c) & 0x2000) == 0)
continue;
- outb(5, 0x80);
+ udelay(2);
val &= 0x00ff; /* get ID_STRING */
val |= 0x2000;
k = fun_scam(dev, &val);
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
