On Thu, 2007-05-03 at 17:20 -0700, Andrew Morton wrote: > (Switching to email - please use reply-to-all) > > On Thu, 3 May 2007 15:26:41 -0700 > [EMAIL PROTECTED] wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=8426 > > > > Summary: massive slowdown on SCSI CD/DVD drive connected to > > mptspi driver > > Kernel Version: 2.6.21 > > Status: NEW > > Severity: high > > Owner: [EMAIL PROTECTED] > > Submitter: [EMAIL PROTECTED] > > > > > > Most recent kernel where this bug did *NOT* occur: > > 2.6.20 > > > > Distribution: > > fedora 7 - test 4 > > seen with fedora kernel and stock upstream 2.6.21 kernel as well > > > > Hardware Environment: > > HP Integrity Superdome > > NEC DVD_RW ND-3540A > > LSI Fusion MPT SPI SCSI adapter > > > > also on: > > HP Integrity rx8640 > > NEC DVD+RW ND-2100AD > > > > > > Software Environment: fedora 7 test 4 > > > > Problem Description: > > Reading CD/DVD is approx 150times slower than usual. Simple test of: > > time cat kernel-2.6.20-1.3088.fc7.ia64.rpm > /dev/null > > > > took approx 10 minutes on 2.6.21, took 2-4 seconds on 2.6.20 (same system, > > same > > disk, repeated multiple times to ensure it wasn't bad hardware) > > > > > > Steps to reproduce: > > mount a DVD > > read a large file from the DVD > > > > > > Appears to have been caused by this git commit: > > Thanks heaps for doing the bisection - it really helps. > > > commit 5a9c47b1344b514758d5d7f193c672850390cc36 > > Author: Eric Moore <[EMAIL PROTECTED]> > > Date: Mon Jan 29 09:43:17 2007 -0700 > > > > [SCSI] fusion - move SPI API over to mptspi.c > > > > Move some functions that only apply to the mptspi module over from > > mptscsih. > > Signed-off-by: Eric Moore <[EMAIL PROTECTED]> > > Signed-off-by: James Bottomley <[EMAIL PROTECTED]> > > > > > > I backed out this patch against the current HEAD and DVD drive performance > > is > > back to normal. I have not yet looked into this to determine exactly what > > in > > this patch caused the issue. > > That's a bit surprising - all the patch allegedly does is move stuff > around. Here's my version of a backout patch against 2.6.21 - can anyone > spot any bloopers in it? > > > drivers/message/fusion/mptscsih.c | 284 ++++++++++++++++++++++++++++ > drivers/message/fusion/mptspi.c | 268 -------------------------- > 2 files changed, 285 insertions(+), 267 deletions(-) > > diff -puN > drivers/message/fusion/mptscsih.c~revert-fusion-move-spi-api-over-to-mptspic > drivers/message/fusion/mptscsih.c > --- > a/drivers/message/fusion/mptscsih.c~revert-fusion-move-spi-api-over-to-mptspic > +++ a/drivers/message/fusion/mptscsih.c > @@ -98,6 +98,9 @@ static int mptscsih_IssueTaskMgmt(MPT_SC > int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); > int mptscsih_event_process(MPT_ADAPTER *ioc, > EventNotificationReply_t *pEvReply); > > +static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, > struct scsi_device *sdev); > +static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget > *vtarget, struct scsi_device *sdev); > +static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int channel, int id); > int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, > MPT_FRAME_HDR *r); > static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); > static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice > *vdevice); > @@ -2410,6 +2413,7 @@ mptscsih_slave_configure(struct scsi_dev > } > > vdevice->configured_lun = 1; > + mptscsih_initTarget(hd, vtarget, sdev); > mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); > > dsprintk((MYIOC_s_INFO_FMT > @@ -2673,6 +2677,286 @@ mptscsih_event_process(MPT_ADAPTER *ioc, > > > /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > /* > + * mptscsih_initTarget - Target, LUN alloc/free functionality. > + * @hd: Pointer to MPT_SCSI_HOST structure > + * @vtarget: per target private data > + * @sdev: SCSI device > + * > + * NOTE: It's only SAFE to call this routine if data points to > + * sane & valid STANDARD INQUIRY data! > + * > + * Allocate and initialize memory for this target. > + * Save inquiry data. > + * > + */ > +static void > +mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, > + struct scsi_device *sdev) > +{ > + dinitprintk((MYIOC_s_INFO_FMT "initTarget channel=%d id=%d lun=%d > hd=%p\n", > + hd->ioc->name, vtarget->channel, vtarget->id, > + sdev->lun, hd)); > + > + /* Is LUN supported? If so, upper 2 bits will be 0 > + * in first byte of inquiry data. > + */ > + if (sdev->inq_periph_qual != 0) > + return; > + > + if (vtarget == NULL) > + return; > + > + vtarget->type = sdev->type; > + > + if (hd->ioc->bus_type != SPI) > + return; > + > + if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { > + /* Treat all Processors as SAF-TE if > + * command line option is set */ > + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; > + mptscsih_writeIOCPage4(hd, vtarget->channel, vtarget->id); > + }else if ((sdev->type == TYPE_PROCESSOR) && > + !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { > + if (sdev->inquiry_len > 49 ) { > + if (sdev->inquiry[44] == 'S' && > + sdev->inquiry[45] == 'A' && > + sdev->inquiry[46] == 'F' && > + sdev->inquiry[47] == '-' && > + sdev->inquiry[48] == 'T' && > + sdev->inquiry[49] == 'E' ) { > + vtarget->tflags |= > MPT_TARGET_FLAGS_SAF_TE_ISSUED; > + mptscsih_writeIOCPage4(hd, vtarget->channel, > vtarget->id); > + } > + } > + } > + mptscsih_setTargetNegoParms(hd, vtarget, sdev); > +} > + > +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > +/* > + * Update the target negotiation parameters based on the > + * the Inquiry data, adapter capabilities, and NVRAM settings. > + * > + */ > +static void > +mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, > + struct scsi_device *sdev) > +{ > + SpiCfgData *pspi_data = &hd->ioc->spi_data; > + int id = (int) target->id; > + int nvram; > + u8 width = MPT_NARROW; > + u8 factor = MPT_ASYNC; > + u8 offset = 0; > + u8 nfactor; > + u8 noQas = 1; > + > + target->negoFlags = pspi_data->noQas; > + > + /* noQas == 0 => device supports QAS. */ > + > + if (sdev->scsi_level < SCSI_2) { > + width = 0; > + factor = MPT_ULTRA2; > + offset = pspi_data->maxSyncOffset; > + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; > + } else { > + if (scsi_device_wide(sdev)) { > + width = 1; > + } > + > + if (scsi_device_sync(sdev)) { > + factor = pspi_data->minSyncFactor; > + if (!scsi_device_dt(sdev)) > + factor = MPT_ULTRA2; > + else { > + if (!scsi_device_ius(sdev) && > + !scsi_device_qas(sdev)) > + factor = MPT_ULTRA160; > + else { > + factor = MPT_ULTRA320; > + if (scsi_device_qas(sdev)) { > + ddvtprintk((KERN_INFO "Enabling > QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id)); > + noQas = 0; > + } > + if (sdev->type == TYPE_TAPE && > + scsi_device_ius(sdev)) > + target->negoFlags |= > MPT_TAPE_NEGO_IDP; > + } > + } > + offset = pspi_data->maxSyncOffset; > + > + /* If RAID, never disable QAS > + * else if non RAID, do not disable > + * QAS if bit 1 is set > + * bit 1 QAS support, non-raid only > + * bit 0 IU support > + */ > + if (target->raidVolume == 1) { > + noQas = 0; > + } > + } else { > + factor = MPT_ASYNC; > + offset = 0; > + } > + } > + > + if (!sdev->tagged_supported) { > + target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; > + } > + > + /* Update tflags based on NVRAM settings. (SCSI only) > + */ > + if (pspi_data->nvram && (pspi_data->nvram[id] != > MPT_HOST_NVRAM_INVALID)) { > + nvram = pspi_data->nvram[id]; > + nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; > + > + if (width) > + width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; > + > + if (offset > 0) { > + /* Ensure factor is set to the > + * maximum of: adapter, nvram, inquiry > + */ > + if (nfactor) { > + if (nfactor < pspi_data->minSyncFactor ) > + nfactor = pspi_data->minSyncFactor; > + > + factor = max(factor, nfactor); > + if (factor == MPT_ASYNC) > + offset = 0; > + } else { > + offset = 0; > + factor = MPT_ASYNC; > + } > + } else { > + factor = MPT_ASYNC; > + } > + } > + > + /* Make sure data is consistent > + */ > + if ((!width) && (factor < MPT_ULTRA2)) { > + factor = MPT_ULTRA2; > + } > + > + /* Save the data to the target structure. > + */ > + target->minSyncFactor = factor; > + target->maxOffset = offset; > + target->maxWidth = width; > + > + target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; > + > + /* Disable unused features. > + */ > + if (!width) > + target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; > + > + if (!offset) > + target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; > + > + if ( factor > MPT_ULTRA320 ) > + noQas = 0; > + > + if (noQas && (pspi_data->noQas == 0)) { > + pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; > + target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; > + > + /* Disable QAS in a mixed configuration case > + */ > + > + ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on > id=%d!\n", noQas, id)); > + } > +} > + > +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > + > +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > +/* > + * SCSI Config Page functionality ... > + */ > + > +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > +/* mptscsih_writeIOCPage4 - write IOC Page 4 > + * @hd: Pointer to a SCSI Host Structure > + * @channel: write IOC Page4 for this Bus > + * @id: write IOC Page4 for this ID > + * > + * Return: -EAGAIN if unable to obtain a Message Frame > + * or 0 if success. > + * > + * Remark: We do not wait for a return, write pages sequentially. > + */ > +static int > +mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int channel, int id) > +{ > + MPT_ADAPTER *ioc = hd->ioc; > + Config_t *pReq; > + IOCPage4_t *IOCPage4Ptr; > + MPT_FRAME_HDR *mf; > + dma_addr_t dataDma; > + u16 req_idx; > + u32 frameOffset; > + u32 flagsLength; > + int ii; > + > + /* Get a MF for this command. > + */ > + if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { > + dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg > frames!\n", > + ioc->name)); > + return -EAGAIN; > + } > + > + /* Set the request and the data pointers. > + * Place data at end of MF. > + */ > + pReq = (Config_t *)mf; > + > + req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); > + frameOffset = ioc->req_sz - sizeof(IOCPage4_t); > + > + /* Complete the request frame (same for all requests). > + */ > + pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; > + pReq->Reserved = 0; > + pReq->ChainOffset = 0; > + pReq->Function = MPI_FUNCTION_CONFIG; > + pReq->ExtPageLength = 0; > + pReq->ExtPageType = 0; > + pReq->MsgFlags = 0; > + for (ii=0; ii < 8; ii++) { > + pReq->Reserved2[ii] = 0; > + } > + > + IOCPage4Ptr = ioc->spi_data.pIocPg4; > + dataDma = ioc->spi_data.IocPg4_dma; > + ii = IOCPage4Ptr->ActiveSEP++; > + IOCPage4Ptr->SEP[ii].SEPTargetID = id; > + IOCPage4Ptr->SEP[ii].SEPBus = channel; > + pReq->Header = IOCPage4Ptr->Header; > + pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); > + > + /* Add a SGE to the config request. > + */ > + flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | > + (IOCPage4Ptr->Header.PageLength + ii) * 4; > + > + mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); > + > + dinitprintk((MYIOC_s_INFO_FMT > + "writeIOCPage4: MaxSEP=%d ActiveSEP=%d channel=%d id=%d \n", > + ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, > channel, id)); > + > + mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); > + > + return 0; > +} > + > +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ > +/* > * Bus Scan and Domain Validation functionality ... > */ > > diff -puN > drivers/message/fusion/mptspi.c~revert-fusion-move-spi-api-over-to-mptspic > drivers/message/fusion/mptspi.c > --- > a/drivers/message/fusion/mptspi.c~revert-fusion-move-spi-api-over-to-mptspic > +++ a/drivers/message/fusion/mptspi.c > @@ -95,269 +95,6 @@ static int mptspiDoneCtx = -1; > static int mptspiTaskCtx = -1; > static int mptspiInternalCtx = -1; /* Used only for internal commands */ > > -/** > - * mptspi_setTargetNegoParms - Update the target negotiation > - * parameters based on the the Inquiry data, adapter capabilities, > - * and NVRAM settings > - * > - * @hd: Pointer to a SCSI Host Structure > - * @vtarget: per target private data > - * @sdev: SCSI device > - * > - **/ > -static void > -mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, > - struct scsi_device *sdev) > -{ > - SpiCfgData *pspi_data = &hd->ioc->spi_data; > - int id = (int) target->id; > - int nvram; > - u8 width = MPT_NARROW; > - u8 factor = MPT_ASYNC; > - u8 offset = 0; > - u8 nfactor; > - u8 noQas = 1; > - > - target->negoFlags = pspi_data->noQas; > - > - if (sdev->scsi_level < SCSI_2) { > - width = 0; > - factor = MPT_ULTRA2; > - offset = pspi_data->maxSyncOffset; > - target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; > - } else { > - if (scsi_device_wide(sdev)) > - width = 1; > - > - if (scsi_device_sync(sdev)) { > - factor = pspi_data->minSyncFactor; > - if (!scsi_device_dt(sdev)) > - factor = MPT_ULTRA2; > - else { > - if (!scsi_device_ius(sdev) && > - !scsi_device_qas(sdev)) > - factor = MPT_ULTRA160; > - else { > - factor = MPT_ULTRA320; > - if (scsi_device_qas(sdev)) { > - ddvprintk((KERN_INFO "Enabling > QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id)); > - noQas = 0; > - } > - if (sdev->type == TYPE_TAPE && > - scsi_device_ius(sdev)) > - target->negoFlags |= > MPT_TAPE_NEGO_IDP; > - } > - } > - offset = pspi_data->maxSyncOffset; > - > - /* If RAID, never disable QAS > - * else if non RAID, do not disable > - * QAS if bit 1 is set > - * bit 1 QAS support, non-raid only > - * bit 0 IU support > - */ > - if (target->raidVolume == 1) > - noQas = 0; > - } else { > - factor = MPT_ASYNC; > - offset = 0; > - } > - } > - > - if (!sdev->tagged_supported) > - target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; > - > - /* Update tflags based on NVRAM settings. (SCSI only) > - */ > - if (pspi_data->nvram && (pspi_data->nvram[id] != > MPT_HOST_NVRAM_INVALID)) { > - nvram = pspi_data->nvram[id]; > - nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; > - > - if (width) > - width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; > - > - if (offset > 0) { > - /* Ensure factor is set to the > - * maximum of: adapter, nvram, inquiry > - */ > - if (nfactor) { > - if (nfactor < pspi_data->minSyncFactor ) > - nfactor = pspi_data->minSyncFactor; > - > - factor = max(factor, nfactor); > - if (factor == MPT_ASYNC) > - offset = 0; > - } else { > - offset = 0; > - factor = MPT_ASYNC; > - } > - } else { > - factor = MPT_ASYNC; > - } > - } > - > - /* Make sure data is consistent > - */ > - if ((!width) && (factor < MPT_ULTRA2)) > - factor = MPT_ULTRA2; > - > - /* Save the data to the target structure. > - */ > - target->minSyncFactor = factor; > - target->maxOffset = offset; > - target->maxWidth = width; > - > - target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; > - > - /* Disable unused features. > - */ > - if (!width) > - target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; > - > - if (!offset) > - target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; > - > - if ( factor > MPT_ULTRA320 ) > - noQas = 0; > - > - if (noQas && (pspi_data->noQas == 0)) { > - pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; > - target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; > - > - /* Disable QAS in a mixed configuration case > - */ > - > - ddvprintk((KERN_INFO "Disabling QAS due to noQas=%02x on > id=%d!\n", noQas, id)); > - } > -} > - > -/** > - * mptspi_writeIOCPage4 - write IOC Page 4 > - * @hd: Pointer to a SCSI Host Structure > - * @channel: > - * @id: write IOC Page4 for this ID & Bus > - * > - * Return: -EAGAIN if unable to obtain a Message Frame > - * or 0 if success. > - * > - * Remark: We do not wait for a return, write pages sequentially. > - **/ > -static int > -mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) > -{ > - MPT_ADAPTER *ioc = hd->ioc; > - Config_t *pReq; > - IOCPage4_t *IOCPage4Ptr; > - MPT_FRAME_HDR *mf; > - dma_addr_t dataDma; > - u16 req_idx; > - u32 frameOffset; > - u32 flagsLength; > - int ii; > - > - /* Get a MF for this command. > - */ > - if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { > - dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg > frames!\n", > - ioc->name)); > - return -EAGAIN; > - } > - > - /* Set the request and the data pointers. > - * Place data at end of MF. > - */ > - pReq = (Config_t *)mf; > - > - req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx); > - frameOffset = ioc->req_sz - sizeof(IOCPage4_t); > - > - /* Complete the request frame (same for all requests). > - */ > - pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; > - pReq->Reserved = 0; > - pReq->ChainOffset = 0; > - pReq->Function = MPI_FUNCTION_CONFIG; > - pReq->ExtPageLength = 0; > - pReq->ExtPageType = 0; > - pReq->MsgFlags = 0; > - for (ii=0; ii < 8; ii++) { > - pReq->Reserved2[ii] = 0; > - } > - > - IOCPage4Ptr = ioc->spi_data.pIocPg4; > - dataDma = ioc->spi_data.IocPg4_dma; > - ii = IOCPage4Ptr->ActiveSEP++; > - IOCPage4Ptr->SEP[ii].SEPTargetID = id; > - IOCPage4Ptr->SEP[ii].SEPBus = channel; > - pReq->Header = IOCPage4Ptr->Header; > - pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); > - > - /* Add a SGE to the config request. > - */ > - flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | > - (IOCPage4Ptr->Header.PageLength + ii) * 4; > - > - mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); > - > - ddvprintk((MYIOC_s_INFO_FMT > - "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", > - ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, > id, channel)); > - > - mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); > - > - return 0; > -} > - > -/** > - * mptspi_initTarget - Target, LUN alloc/free functionality. > - * @hd: Pointer to MPT_SCSI_HOST structure > - * @vtarget: per target private data > - * @sdev: SCSI device > - * > - * NOTE: It's only SAFE to call this routine if data points to > - * sane & valid STANDARD INQUIRY data! > - * > - * Allocate and initialize memory for this target. > - * Save inquiry data. > - * > - **/ > -static void > -mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, > - struct scsi_device *sdev) > -{ > - > - /* Is LUN supported? If so, upper 2 bits will be 0 > - * in first byte of inquiry data. > - */ > - if (sdev->inq_periph_qual != 0) > - return; > - > - if (vtarget == NULL) > - return; > - > - vtarget->type = sdev->type; > - > - if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { > - /* Treat all Processors as SAF-TE if > - * command line option is set */ > - vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; > - mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); > - }else if ((sdev->type == TYPE_PROCESSOR) && > - !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { > - if (sdev->inquiry_len > 49 ) { > - if (sdev->inquiry[44] == 'S' && > - sdev->inquiry[45] == 'A' && > - sdev->inquiry[46] == 'F' && > - sdev->inquiry[47] == '-' && > - sdev->inquiry[48] == 'T' && > - sdev->inquiry[49] == 'E' ) { > - vtarget->tflags |= > MPT_TARGET_FLAGS_SAF_TE_ISSUED; > - mptspi_writeIOCPage4(hd, vtarget->channel, > vtarget->id); > - } > - } > - } > - mptspi_setTargetNegoParms(hd, vtarget, sdev); > -} > > /** > * mptspi_is_raid - Determines whether target is belonging to volume > @@ -723,16 +460,13 @@ static int mptspi_slave_alloc(struct scs > > static int mptspi_slave_configure(struct scsi_device *sdev) > { > + int ret = mptscsih_slave_configure(sdev); > struct _MPT_SCSI_HOST *hd = > (struct _MPT_SCSI_HOST *)sdev->host->hostdata; > - VirtTarget *vtarget = scsi_target(sdev)->hostdata; > - int ret = mptscsih_slave_configure(sdev); > > if (ret) > return ret; > > - mptspi_initTarget(hd, vtarget, sdev); > - > ddvprintk((MYIOC_s_INFO_FMT "id=%d min_period=0x%02x" > " max_offset=0x%02x max_width=%d\n", hd->ioc->name, > sdev->id, spi_min_period(scsi_target(sdev)), > _ >
ACK, tested this on my system where I originally found the problem and all is well with this. Ignore my earlier comment about the original patch adding the new function mptspi_initTarget. After looking at what is going on I realize that it didn't add this, it was just renamed from mptscsih_initTarget. - Doug - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
