On Sun, 28 Nov 2010, Alberto Panizzo wrote:
> This patch is tested and works with the OV2640 camera that output
> YUV422 (UYVY) and RGB565 data.
>
> The YUV422 format is managed to be converted in IPU internal YUV444 format
> so this stream could be used in the future to feed directly other IPU
> blocks.
> The RGB565 format is managed as GENERIC and can be moved only from CSI
> to memory.
>
> Signed-off-by: Alberto Panizzo <maramaopercheseimo...@gmail.com>
> ---
>
> Before applying, please give me feedback if this break in some way other
> pixel formats!
>
>
> drivers/media/video/mx3_camera.c | 126
> +++++++++++++++++++++++++++++++++-----
> 1 files changed, 110 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/media/video/mx3_camera.c
> b/drivers/media/video/mx3_camera.c
> index 29c5fc3..6811d6f 100644
> --- a/drivers/media/video/mx3_camera.c
> +++ b/drivers/media/video/mx3_camera.c
> @@ -55,6 +55,31 @@
> #define CSI_SENS_CONF_EXT_VSYNC_SHIFT 15
> #define CSI_SENS_CONF_DIVRATIO_SHIFT 16
>
> +/*
> + * IPU support the following data formatting (44.1.1.3 Data Flows and
> Formats):
> + * 1 YUV 4:4:4 or RGB—8 bits per color component
> + * 2 YUV 4:4:4 or RGB—10 bits per color component
> + * 3 Generic data (from sensor to the system memory only)
> + * The formats 1 and 2 are aligned in words of 32 bits, 3 is free and not
> + * recognized by IPU blocks.
> + *
> + * Taking the value of SENS_DATA_FORMAT and DATA_WIDTH, the CSI tries to
> + * align (or rearrange) the sampled data to fit the IPU supported formats
> + * as follows:
> + * - CSI_SENS_CONF_DATA_FMT_RGB_YUV444: It consider the pixel as a sequence
> of
> + * 3 components of width DATA_WIDTH aligning these to a 32 bit word.
> + * The CSI output in this case can feed other IPU blocks.
> + * - CSI_SENS_CONF_DATA_FMT_YUV422: It consider the pixel as a sequence of
> + * 2 components of width DATA_WIDTH were the first is the alternating U V
s/were/where/
> + * components and the second is Y. It construct the YUV444 word repeating
> + * the previous U, V samples aligning the results to a 32 bit word.
> + * The CSI output in this case can feed other IPU blocks.
> + * - CSI_SENS_CONF_DATA_FMT_BAYER: No rework is performed in this case.
> + * The sensor data is given as is, considering _every sample_ as a pixel
> + * data. This format (combined with the GENERIC IPU pixel formats) can
> + * carry all the other sensor pixel formats to the system memory.
> + * The CSI output in this case _can not_ feed other IPU blocks.
> + */
> #define CSI_SENS_CONF_DATA_FMT_RGB_YUV444 (0UL <<
> CSI_SENS_CONF_DATA_FMT_SHIFT)
> #define CSI_SENS_CONF_DATA_FMT_YUV422 (2UL <<
> CSI_SENS_CONF_DATA_FMT_SHIFT)
> #define CSI_SENS_CONF_DATA_FMT_BAYER (3UL <<
> CSI_SENS_CONF_DATA_FMT_SHIFT)
> @@ -323,14 +348,12 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
> {
> /* Add more formats as need arises and test possibilities appear... */
> switch (fourcc) {
> - case V4L2_PIX_FMT_RGB565:
> - return IPU_PIX_FMT_RGB565;
> case V4L2_PIX_FMT_RGB24:
> return IPU_PIX_FMT_RGB24;
> + case V4L2_PIX_FMT_UYVY:
> + return IPU_PIX_FMT_UYVY;
> + case V4L2_PIX_FMT_RGB565:
> case V4L2_PIX_FMT_RGB332:
> - return IPU_PIX_FMT_RGB332;
> - case V4L2_PIX_FMT_YUV422P:
> - return IPU_PIX_FMT_YVU422P;
> default:
> return IPU_PIX_FMT_GENERIC;
> }
Ok, so far mx3_camera has only been used with mt9m022 and mt9t031 sensors
(from what I can see in the mainline), both are bayer. It can also work
with monochrome cameras, and that would be the IPU_PIX_FMT_GENERIC case
too. So, I wouldn't mind removing the rest, and only adding / fixing what
you've now tested / implemented with your omnivision sensor. If anyone is
using mx3_camera with any other formats and thinks, that they work -
please, shout now. I'll probably also post a separate mail with this
warning.
> @@ -358,9 +381,25 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
>
> /* This is the configuration of one sg-element */
> video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc);
> - video->out_width = icd->user_width;
> - video->out_height = icd->user_height;
> - video->out_stride = icd->user_width;
> +
> + if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
> + /*
> + * IPU_PIX_FMT_GENERIC transport bytes, not pixels. So convert
> + * video->out_width and stride to the correct unit.
> + */
> + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
> + icd->current_fmt->host_fmt);
> + BUG_ON(bytes_per_line <= 0);
> +
> + video->out_width = bytes_per_line;
> + video->out_height = icd->user_height;
> + video->out_stride = bytes_per_line;
> + } else {
> + /* For IPU known formats the pixel unit is OK */
> + video->out_width = icd->user_width;
> + video->out_height = icd->user_height;
> + video->out_stride = icd->user_width;
> + }
>
> #ifdef DEBUG
> /* helps to see what DMA actually has written */
> @@ -730,18 +769,68 @@ static int mx3_camera_get_formats(struct
> soc_camera_device *icd, unsigned int id
> if (xlate) {
> xlate->host_fmt = fmt;
> xlate->code = code;
> + dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n",
> + (xlate->host_fmt->fourcc >> (0*8)) & 0xFF,
> + (xlate->host_fmt->fourcc >> (1*8)) & 0xFF,
> + (xlate->host_fmt->fourcc >> (2*8)) & 0xFF,
> + (xlate->host_fmt->fourcc >> (3*8)) & 0xFF);
> xlate++;
> - dev_dbg(dev, "Providing format %x in pass-through mode\n",
> - xlate->host_fmt->fourcc);
make it even simpler: s/xlate->host_fmt/fmt/g
> }
>
> return formats;
> }
>
> +static int samples_per_pixel(enum v4l2_mbus_pixelcode mcode)
> +{
> + switch (mcode) {
> + case V4L2_MBUS_FMT_YUYV8_2X8:
> + case V4L2_MBUS_FMT_YVYU8_2X8:
> + case V4L2_MBUS_FMT_VYUY8_2X8:
> + case V4L2_MBUS_FMT_YVYU10_2X10:
> + case V4L2_MBUS_FMT_YUYV10_2X10:
> + case V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE:
> + case V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE:
> + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
> + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
> + case V4L2_MBUS_FMT_RGB565_2X8_LE:
> + case V4L2_MBUS_FMT_RGB565_2X8_BE:
> + case V4L2_MBUS_FMT_BGR565_2X8_LE:
> + case V4L2_MBUS_FMT_BGR565_2X8_BE:
> + return 2;
> + case V4L2_MBUS_FMT_SBGGR8_1X8:
> + case V4L2_MBUS_FMT_SBGGR10_1X10:
> + case V4L2_MBUS_FMT_GREY8_1X8:
> + case V4L2_MBUS_FMT_Y10_1X10:
> + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE:
> + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE:
Are these two really 1 sample per pixel?
> + case V4L2_MBUS_FMT_SGRBG8_1X8:
> + return 1;
> + default:
> + /* Add other pixel codes as needed */
> + return 0;
> + }
> +}
Let's just do the following:
s32 soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf)
{
switch (mf->packing) {
case SOC_MBUS_PACKING_NONE:
case SOC_MBUS_PACKING_EXTEND16:
return 1;
case SOC_MBUS_PACKING_2X8_PADHI:
case SOC_MBUS_PACKING_2X8_PADLO:
return 2;
}
return -EINVAL;
}
EXPORT_SYMBOL(soc_mbus_samples_per_pixel);
in drivers/media/video/soc_mediabus.c, agree?
> +
> static void configure_geometry(struct mx3_camera_dev *mx3_cam,
> - unsigned int width, unsigned int height)
> + unsigned int width, unsigned int height,
> + enum v4l2_mbus_pixelcode code)
> {
> u32 ctrl, width_field, height_field;
> + const struct soc_mbus_pixelfmt *fmt;
> +
> + fmt = soc_mbus_get_fmtdesc(code);
> + BUG_ON(!fmt);
> +
> + if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) {
> + /*
> + * As we don't have an IPU native format, the CSI will be
> + * configured to output BAYER and here we need to convert
> + * geometry unit from pixels to samples.
> + * TODO: Support vertical down sampling (YUV420)
> + */
> + width = width * samples_per_pixel(code);
> + BUG_ON(!width);
> + }
width *= soc_mbus_samples_per_pixel(fmt);
BUG_ON((int)width < 0);
>
> /* Setup frame size - this cannot be changed on-the-fly... */
> width_field = width - 1;
> @@ -850,7 +939,7 @@ static int mx3_camera_set_crop(struct soc_camera_device
> *icd,
> return ret;
> }
>
> - configure_geometry(mx3_cam, mf.width, mf.height);
> + configure_geometry(mx3_cam, mf.width, mf.height, mf.code);
> }
>
> dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
> @@ -893,7 +982,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device
> *icd,
> * mxc_v4l2_s_fmt()
> */
>
> - configure_geometry(mx3_cam, pix->width, pix->height);
> + configure_geometry(mx3_cam, pix->width, pix->height, xlate->code);
>
> mf.width = pix->width;
> mf.height = pix->height;
> @@ -1112,10 +1201,15 @@ static int mx3_camera_set_bus_param(struct
> soc_camera_device *icd, __u32 pixfmt)
> (3 << CSI_SENS_CONF_DATA_FMT_SHIFT) |
> (3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT));
>
> - /* TODO: Support RGB and YUV formats */
> + /* TODO: Support RGB_YUV444 formats */
>
> - /* This has been set in mx3_camera_activate(), but we clear it above */
> - sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
> + switch (xlate->code) {
> + case V4L2_MBUS_FMT_UYVY8_2X8:
> + sens_conf |= CSI_SENS_CONF_DATA_FMT_YUV422;
> + break;
> + default:
> + sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
> + }
>
> if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
> sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
> --
> 1.6.3.3
If after all the above changed your set up still works, we're cool!;)
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
