From: Dongchun Zhu <dongchun....@mediatek.com>

This patch adds device tree bindings documentation for the ov8856 CMOS
image sensor.

Signed-off-by: Dongchun Zhu <dongchun....@mediatek.com>
---
 .../devicetree/bindings/media/i2c/ov8856.txt       | 51 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.txt 
b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
new file mode 100644
index 0000000..99c654a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
@@ -0,0 +1,51 @@
+* Omnivision OV8856 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: Shall be "ovti,ov8856"
+- reg: I2C bus address of the device. Depending on how the sensor is wired,
+       it shall be <0x10>.
+- clocks: Reference to the xvclk input clock.
+- clock-names: Shall be "xvclk".
+- clock-frequency: Frequency of the xclk clock.
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dvdd-supply: Digital core voltage supply, 1.5 volts
+- reset-gpios: High active reset gpio
+
+The device node shall contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Properties on endpoint:
+- data-lanes: check ../video-interfaces.txt
+- link-frequencies: check ../video-interfaces.txt
+- remote-endpoint: check ../video-interfaces.txt
+
+Example:
+
+&i2c1 {
+       ov8856: camera-sensor@10 {
+               compatible = "ovti,ov8856";
+               reg = <0x10>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&clk_24m_cam>;
+
+               clocks = <&cru SCLK_TESTCLKOUT1>;
+               clock-names = "xvclk";
+               clock-frequency = <19200000>;
+
+               avdd-supply = <&mt6358_vcama2_reg>;
+               dvdd-supply = <&mt6358_vcamd_reg>;
+               dovdd-supply = <&mt6358_vcamio_reg>;
+               reset-gpios = <&pio 111 GPIO_ACTIVE_HIGH>;
+
+               port {
+                       /* MIPI CSI-2 bus endpoint */
+                       wcam_out: endpoint {
+                               remote-endpoint = <&mipi_in_wcam>;
+                               data-lanes = <1 2 3 4>;
+                               link-frequencies = /bits/ 64 <360000000 
180000000>;
+                       };
+               };
+       };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e..7746c6b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11889,6 +11889,7 @@ L:      linux-media@vger.kernel.org
 T:     git git://linuxtv.org/media_tree.git
 S:     Maintained
 F:     drivers/media/i2c/ov8856.c
+F:     Documentation/devicetree/bindings/media/i2c/ov8856.txt
 
 OMNIVISION OV9650 SENSOR DRIVER
 M:     Sakari Ailus <sakari.ai...@linux.intel.com>
-- 
2.9.2

Reply via email to