On Wed, 20 Jan 2010, Valentin Longchamp wrote:
> This prevents the registers to be different to the computed values
> the second time you open the same camera with the sames parameters.
>
> The images were different between the first device open and the
> second one with the same parameters.
But why they were different? Weren't xskip and yskip preserved from the
previous S_CROP / S_FMT configuration? If so, then, I am afraid, this is
the behaviour, mandated by the API, and as such shall not be changed. Or
have I misunderstood you?
Thanks
Guennadi
>
> Signed-off-by: Valentin Longchamp <valentin.longch...@epfl.ch>
> ---
> drivers/media/video/mt9t031.c | 17 ++++++++---------
> 1 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
> index a9061bf..e4a9095 100644
> --- a/drivers/media/video/mt9t031.c
> +++ b/drivers/media/video/mt9t031.c
> @@ -17,6 +17,7 @@
> #include <media/v4l2-chip-ident.h>
> #include <media/soc_camera.h>
>
> +
> /*
> * mt9t031 i2c address 0x5d
> * The platform has to define i2c_board_info and link to it from
> @@ -337,15 +338,13 @@ static int mt9t031_set_params(struct i2c_client *client,
> if (ret >= 0)
> ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank);
>
> - if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) {
> - /* Binning, skipping */
> - if (ret >= 0)
> - ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
> - ((xbin - 1) << 4) | (xskip - 1));
> - if (ret >= 0)
> - ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
> - ((ybin - 1) << 4) | (yskip - 1));
> - }
> + /* Binning, skipping */
> + if (ret >= 0)
> + ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
> + ((xbin - 1) << 4) | (xskip - 1));
> + if (ret >= 0)
> + ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
> + ((ybin - 1) << 4) | (yskip - 1));
> dev_dbg(&client->dev, "new physical left %u, top %u\n",
> rect->left, rect->top);
>
> --
> 1.6.3.3
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
