This prevents the registers to be different to the computed values
the second time you open the same camera with the sames parameters.
The images were different between the first device open and the
second one with the same parameters.
Signed-off-by: Valentin Longchamp <valentin.longch...@epfl.ch>
---
drivers/media/video/mt9t031.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index a9061bf..e4a9095 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -17,6 +17,7 @@
#include <media/v4l2-chip-ident.h>
#include <media/soc_camera.h>
+
/*
* mt9t031 i2c address 0x5d
* The platform has to define i2c_board_info and link to it from
@@ -337,15 +338,13 @@ static int mt9t031_set_params(struct i2c_client *client,
if (ret >= 0)
ret = reg_write(client, MT9T031_VERTICAL_BLANKING, vblank);
- if (yskip != mt9t031->yskip || xskip != mt9t031->xskip) {
- /* Binning, skipping */
- if (ret >= 0)
- ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
- ((xbin - 1) << 4) | (xskip - 1));
- if (ret >= 0)
- ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
- ((ybin - 1) << 4) | (yskip - 1));
- }
+ /* Binning, skipping */
+ if (ret >= 0)
+ ret = reg_write(client, MT9T031_COLUMN_ADDRESS_MODE,
+ ((xbin - 1) << 4) | (xskip - 1));
+ if (ret >= 0)
+ ret = reg_write(client, MT9T031_ROW_ADDRESS_MODE,
+ ((ybin - 1) << 4) | (yskip - 1));
dev_dbg(&client->dev, "new physical left %u, top %u\n",
rect->left, rect->top);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
