Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
RX mode.
Signed-off-by: Luis Oliveira <loli...@synopsys.com>
---
Changelog
v2-V3
- removed gpios reference - it was for a separated driver
- changed address to show complete address
.../devicetree/bindings/phy/snps,dphy-rx.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
new file mode 100644
index 0000000..03d17ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare MIPI Rx D-PHY block details
+
+Description
+-----------
+
+The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
+Please refer to phy-bindings.txt for more information.
+
+Required properties:
+- compatible : Shall be "snps,dphy-rx".
+- #phy-cells : Must be 1.
+- snps,dphy-frequency : Output frequency of the D-PHY.
+- snps,dphy-te-len : Size of the communication interface (8 bits->8 or
12bits->12).
+- reg : Physical base address and size of the device memory
mapped
+ registers;
+
+Example:
+
+ mipi_dphy_rx1: dphy@d00003040 {
+ compatible = "snps,dphy-rx";
+ #phy-cells = <1>;
+ snps,dphy-frequency = <300000>;
+ snps,dphy-te-len = <12>;
+ reg = < 0xd0003040 0x20
+ 0xd0008000 0x100
+ 0xd0009000 0x100>;
+ };
+
--
2.7.4
