The currrent driver layout had the following layout:
+----------------+
+-------+ | TVP5150 |
| Comp0 +--+ | |
+-------+ | | +-----+
+-------+ | +------+ | Src |
| Comp1 +--+--|Sink | +-----+
+-------+ | +------+ +-----+
+--------+ | | | Src |
| SVideo +--+ | +-----+
+--------+ +----------------+
Since the device tree abstracts the real hardware this layout is not
correct, because the TVP5150 has 3 physical ports (2 input, 1 output).
Furthermore this layout assumes that there is an additional external mux
in front of the TVP5150. This is not correct because the TVP5150 does
the muxing work. The corresponding of_graph layout will look like:
tvp5150 {
....
port {
reg = <0>;
endpoint@0 {...};
endpoint@1 {...};
endpoint@2 {...};
};
};
This patch change the layout to:
+----------------+
| TVP5150 |
+-------+ +------+ |
| Comp0 +---+ Sink | |
+-------+ +------+ |
+-------+ +------+ +-----+
| Comp1 +---+ Sink | | Src |
+-------+ +------+ +-----+
+--------+ +------+ |
| SVideo +---+ Sink | |
+--------+ +------+ |
+----------------+
To keep things easy an additional 'virtual' S-Video port is added. More
information about the port mapping can be found in the device tree
binding documentation. The connector entities Comp0/1, SVideo are created
only if they are connected to the correct port. If more than one connector
is available the media_entity_operations.link_setup() callback ensures that
only one connector is active. To change the input src the link between
the TVP5150 pad and the connector must be disabled, then a new link can
be enabled.
The patch tries to reduce the '#ifdef CONFIG_MEDIA_CONTROLLER' usage to
a minimum.
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
---
drivers/media/i2c/tvp5150.c | 322 ++++++++++++++++++++++++++++++++----
1 file changed, 287 insertions(+), 35 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index a6fec569a610..6ac29c62d99b 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -44,10 +44,30 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
#define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
+enum tvp5150_ports {
+ TVP5150_PORT_AIP1A = TVP5150_COMPOSITE0,
+ TVP5150_PORT_AIP1B,
+ /* s-video port is a virtual port */
+ TVP5150_PORT_SVIDEO,
+ TVP5150_PORT_YOUT,
+ TVP5150_PORT_NUM,
+};
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+struct tvp5150_connector {
+ struct media_entity con;
+ struct media_pad pad;
+ unsigned int port_num;
+};
+#endif
+
struct tvp5150 {
struct v4l2_subdev sd;
+ struct device_node *endpoints[TVP5150_PORT_NUM];
#ifdef CONFIG_MEDIA_CONTROLLER
- struct media_pad pads[DEMOD_NUM_PADS];
+ struct media_pad pads[TVP5150_PORT_NUM];
+ struct tvp5150_connector *connectors;
+ int active;
#endif
struct v4l2_ctrl_handler hdl;
struct v4l2_rect rect;
@@ -990,7 +1010,7 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
struct v4l2_rect *__crop;
struct tvp5150 *decoder = to_tvp5150(sd);
- if (!format || (format->pad != DEMOD_PAD_VID_OUT))
+ if (!format || (format->pad != TVP5150_PORT_YOUT))
return -EINVAL;
f = &format->format;
@@ -1189,6 +1209,62 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev
*sd,
return 0;
}
+/****************************************************************************
+ * Media entity ops
+ ****************************************************************************/
+#ifdef CONFIG_MEDIA_CONTROLLER
+static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+ u32 config);
+static int tvp5150_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ int ret = 0;
+
+ /*
+ * The tvp state is determined by the enabled sink pad link.
+ * Enabling or disabling the source pad link has no effect.
+ */
+ if (local->flags & MEDIA_PAD_FL_SOURCE)
+ return 0;
+
+ dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]",
+ remote->entity->name, remote->index, local->entity->name,
+ local->index, flags & MEDIA_LNK_FL_ENABLED);
+
+ if (flags & MEDIA_LNK_FL_ENABLED) {
+ if (decoder->active == local->index)
+ goto out;
+ if (decoder->active >= 0) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ dev_dbg(sd->dev, "Setting %d active\n", local->index);
+ decoder->active = local->index;
+ tvp5150_s_routing(sd, local->index, TVP5150_NORMAL, 0);
+ } else {
+ if (decoder->active != local->index)
+ goto out;
+
+ dev_dbg(sd->dev, "going inactive\n");
+ decoder->active = -1;
+ /*
+ * Output black screen for deselected input if TVP5150 variant
+ * supports this.
+ */
+ tvp5150_s_routing(sd, local->index, TVP5150_BLACK_SCREEN, 0);
+ }
+out:
+ return ret;
+}
+
+static const struct media_entity_operations tvp5150_sd_media_ops = {
+ .link_setup = tvp5150_link_setup,
+};
+#endif
/****************************************************************************
I2C Command
****************************************************************************/
@@ -1333,6 +1409,50 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd,
struct v4l2_tuner *vt)
return 0;
}
+static int tvp5150_get_con_num(struct tvp5150 *decoder)
+{
+ unsigned int i, num = 0;
+
+ for (i = 0; i < TVP5150_PORT_NUM - 1; i++)
+ if (decoder->endpoints[i])
+ num++;
+ return num;
+}
+
+static int tvp5150_registered(struct v4l2_subdev *sd)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ unsigned int i, con_num;
+ int ret;
+
+ con_num = tvp5150_get_con_num(decoder);
+ for (i = 0; i < con_num; i++) {
+ struct media_entity *con = &decoder->connectors[i].con;
+ struct media_pad *pad = &decoder->connectors[i].pad;
+ unsigned int port = decoder->connectors[i].port_num;
+
+ pad->flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(con, 1, pad);
+ if (ret < 0)
+ return ret;
+
+ ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
+ if (ret < 0)
+ return ret;
+
+ ret = media_create_pad_link(con, 0, &sd->entity, port, 0);
+ if (ret < 0) {
+ media_device_unregister_entity(con);
+ return ret;
+ }
+
+ }
+#endif
+ return 0;
+}
+
+
/* ----------------------------------------------------------------------- */
static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
@@ -1386,6 +1506,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
.pad = &tvp5150_pad_ops,
};
+static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
+ .registered = tvp5150_registered,
+};
+
/****************************************************************************
I2C Client & Driver
****************************************************************************/
@@ -1534,38 +1658,171 @@ static int tvp5150_init(struct i2c_client *c)
return 0;
}
+static int tvp5150_mc_init(struct v4l2_subdev *sd)
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ struct device *dev = decoder->sd.dev;
+ struct device_node *rp;
+ unsigned int con_num = 0;
+ unsigned int i, j;
+ int ret;
+
+ sd->entity.ops = &tvp5150_sd_media_ops;
+ sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
+
+ /* Initialize all TVP5150 pads */
+ for (i = 0; i < TVP5150_PORT_NUM; i++)
+ decoder->pads[i].flags = (i < TVP5150_PORT_NUM - 1) ?
+ MEDIA_PAD_FL_SINK :
+ MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&sd->entity, TVP5150_PORT_NUM,
+ decoder->pads);
+ if (ret < 0)
+ return ret;
+
+ /* Allocate and initialize all available input connectors */
+ con_num = tvp5150_get_con_num(decoder);
+ if (!con_num)
+ return 0;
+ decoder->connectors = devm_kcalloc(dev, con_num,
+ sizeof(*decoder->connectors),
+ GFP_KERNEL);
+ if (!decoder->connectors)
+ return -ENOMEM;
+
+ for (i = 0, j = 0; i < TVP5150_PORT_NUM - 1; i++) {
+ if (!decoder->endpoints[i])
+ continue;
+
+ switch (i) {
+ case TVP5150_PORT_AIP1A:
+ case TVP5150_PORT_AIP1B:
+ decoder->connectors[j].con.function =
+ MEDIA_ENT_F_CONN_COMPOSITE;
+ break;
+ case TVP5150_PORT_SVIDEO:
+ decoder->connectors[j].con.function =
+ MEDIA_ENT_F_CONN_SVIDEO;
+ break;
+ }
+
+ decoder->connectors[j].con.flags = MEDIA_ENT_FL_CONNECTOR;
+ rp = of_graph_get_remote_port_parent(decoder->endpoints[i]);
+ ret = of_property_read_string(rp, "label",
+ &decoder->connectors[j].con.name);
+ if (ret < 0)
+ return ret;
+ decoder->connectors[j].port_num = i;
+
+ j++;
+ }
+#endif
+ return 0;
+}
+
+static bool tvp5150_valid_input(struct device_node *endpoint,
+ unsigned int port)
+{
+ struct device_node *rp = of_graph_get_remote_port_parent(endpoint);
+ const char *input;
+ int ret;
+
+ switch (port) {
+ case TVP5150_PORT_AIP1A:
+ case TVP5150_PORT_AIP1B:
+ ret = of_device_is_compatible(rp, "composite-video-connector");
+ if (!ret)
+ return false;
+ break;
+ case TVP5150_PORT_SVIDEO:
+ ret = of_device_is_compatible(rp, "svideo-connector");
+ if (!ret)
+ return false;
+ }
+
+ ret = of_property_read_string(rp, "label", &input);
+ if (ret < 0)
+ return false;
+
+ return true;
+}
+
static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
{
+ struct device *dev = decoder->sd.dev;
struct v4l2_fwnode_endpoint bus_cfg;
- struct device_node *ep;
+ struct device_node *ep_np;
unsigned int flags;
- int ret = 0;
+ int ret;
+ bool found = false;
- ep = of_graph_get_next_endpoint(np, NULL);
- if (!ep)
- return -EINVAL;
+ for_each_endpoint_of_node(np, ep_np) {
+ struct of_endpoint ep;
- ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
- if (ret)
- goto err;
-
- flags = bus_cfg.bus.parallel.flags;
+ of_graph_parse_endpoint(ep_np, &ep);
+ if (decoder->endpoints[ep.port]) {
+ dev_warn(dev,
+ "Multiple port endpoints are not supported\n");
+ continue;
+ }
- if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
- !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
- flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
- flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
- ret = -EINVAL;
- goto err;
- }
+ switch (ep.port) {
+ /* Use common tvp5150_valid_input() for all inputs */
+ case TVP5150_PORT_AIP1A:
+ case TVP5150_PORT_AIP1B:
+ case TVP5150_PORT_SVIDEO:
+ if (!tvp5150_valid_input(ep_np, ep.port)) {
+ dev_err(dev,
+ "Invalid endpoint %pOF on port %d\n",
+ ep.local_node, ep.port);
+ ret = -EINVAL;
+ goto err;
+ }
+ break;
+ case TVP5150_PORT_YOUT:
+ ret =
v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np),
+ &bus_cfg);
+ if (ret)
+ goto err;
+
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
+ !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
+ flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
+ flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ decoder->mbus_type = bus_cfg.bus_type;
+ break;
+ default:
+ dev_err(dev, "Invalid port %d for endpoint %pOF\n",
+ ep.port, ep.local_node);
+ ret = -EINVAL;
+ goto err;
+ }
- decoder->mbus_type = bus_cfg.bus_type;
+ of_node_get(ep_np);
+ decoder->endpoints[ep.port] = ep_np;
+ found = true;
+ }
+ return found ? 0 : -ENODEV;
err:
- of_node_put(ep);
return ret;
}
+static void tvp5150_dt_cleanup(struct tvp5150 *decoder)
+{
+ unsigned int i;
+
+ for (i = 0; i < TVP5150_PORT_NUM; i++)
+ of_node_put(decoder->endpoints[i]);
+}
+
static const char * const tvp5150_test_patterns[2] = {
"Disabled",
"Black screen"
@@ -1604,7 +1861,7 @@ static int tvp5150_probe(struct i2c_client *c,
res = tvp5150_parse_dt(core, np);
if (res) {
dev_err(sd->dev, "DT parsing error: %d\n", res);
- return res;
+ goto err_cleanup_dt;
}
} else {
/* Default to BT.656 embedded sync */
@@ -1612,24 +1869,16 @@ static int tvp5150_probe(struct i2c_client *c,
}
v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
+ sd->internal_ops = &tvp5150_internal_ops;
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-#if defined(CONFIG_MEDIA_CONTROLLER)
- core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
- core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
- core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
-
- sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
-
- res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
- if (res < 0)
- return res;
-
-#endif
+ res = tvp5150_mc_init(sd);
+ if (res)
+ goto err_cleanup_dt;
res = tvp5150_detect_version(core);
if (res < 0)
- return res;
+ goto err_cleanup_dt;
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->detected_norm = V4L2_STD_UNKNOWN;
@@ -1683,6 +1932,9 @@ static int tvp5150_probe(struct i2c_client *c,
err:
v4l2_ctrl_handler_free(&core->hdl);
return res;
+err_cleanup_dt:
+ tvp5150_dt_cleanup(core);
+ return res;
}
static int tvp5150_remove(struct i2c_client *c)
--
2.17.1
