Em Thu, 28 Jun 2018 18:20:38 +0200
Marco Felsch <m.fel...@pengutronix.de> escreveu:
> Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
> the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is
> no way to try different selections. The patch adds a helper function to
> select the correct selection memory space (sub-device file handle or
> driver state) which will be set/returned.
>
> The TVP5150 AVID will be updated if the 'which' field is FORMAT_ACTIVE
> and the requested selection rectangle differs from the already set one.
>
> Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
> ---
> drivers/media/i2c/tvp5150.c | 107 ++++++++++++++++++++++++------------
> 1 file changed, 73 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index d150487cc2d1..29eaf8166f25 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -18,6 +18,7 @@
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-fwnode.h>
> #include <media/v4l2-mc.h>
> +#include <media/v4l2-rect.h>
>
> #include "tvp5150_reg.h"
>
> @@ -846,20 +847,38 @@ static v4l2_std_id tvp5150_read_std(struct v4l2_subdev
> *sd)
> }
> }
>
> +static struct v4l2_rect *
> +__tvp5150_get_pad_crop(struct tvp5150 *decoder,
> + struct v4l2_subdev_pad_config *cfg, unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
This is not ok. It causes compilation breakage if the subdev API is not
selected:
drivers/media/i2c/tvp5150.c: In function ‘__tvp5150_get_pad_crop’:
drivers/media/i2c/tvp5150.c:857:10: error: implicit declaration of function
‘v4l2_subdev_get_try_crop’; did you mean ‘v4l2_subdev_has_op’?
[-Werror=implicit-function-declaration]
return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
^~~~~~~~~~~~~~~~~~~~~~~~
v4l2_subdev_has_op
drivers/media/i2c/tvp5150.c:857:10: warning: returning ‘int’ from a function
with return type ‘struct v4l2_rect *’ makes pointer from integer without a cast
[-Wint-conversion]
return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The logic should keep working both with and without subdev API.
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &decoder->rect;
> + default:
> + return NULL;
> + }
> +}
> +
> static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_format *format)
> {
> struct v4l2_mbus_framefmt *f;
> + struct v4l2_rect *__crop;
> struct tvp5150 *decoder = to_tvp5150(sd);
>
> if (!format || (format->pad != DEMOD_PAD_VID_OUT))
> return -EINVAL;
>
> f = &format->format;
> + __crop = __tvp5150_get_pad_crop(decoder, cfg, format->pad,
> + format->which);
>
> - f->width = decoder->rect.width;
> - f->height = decoder->rect.height / 2;
> + f->width = __crop->width;
> + f->height = __crop->height / 2;
>
> f->code = MEDIA_BUS_FMT_UYVY8_2X8;
> f->field = V4L2_FIELD_ALTERNATE;
> @@ -870,17 +889,51 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
> return 0;
> }
>
> +unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + v4l2_std_id std;
> +
> + /* Calculate height based on current standard */
> + if (decoder->norm == V4L2_STD_ALL)
> + std = tvp5150_read_std(sd);
> + else
> + std = decoder->norm;
> +
> + return (std & V4L2_STD_525_60) ?
> + TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
> +}
> +
> +static inline void
> +__tvp5150_set_selection(struct v4l2_subdev *sd, struct v4l2_rect rect)
> +{
> + struct tvp5150 *decoder = to_tvp5150(sd);
> + unsigned int hmax = tvp5150_get_hmax(sd);
> +
> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
> + regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
> + rect.top + rect.height - hmax);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
> + rect.left >> TVP5150_CROP_SHIFT);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
> + rect.left | (1 << TVP5150_CROP_SHIFT));
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
> + (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
> + TVP5150_CROP_SHIFT);
> + regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
> + rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
> +}
> +
> static int tvp5150_set_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_selection *sel)
> {
> struct tvp5150 *decoder = to_tvp5150(sd);
> struct v4l2_rect rect = sel->r;
> - v4l2_std_id std;
> - int hmax;
> + struct v4l2_rect *__crop;
> + unsigned int hmax;
>
> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
> - sel->target != V4L2_SEL_TGT_CROP)
> + if (sel->target != V4L2_SEL_TGT_CROP)
> return -EINVAL;
>
> dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d,
> height=%d\n",
> @@ -889,17 +942,7 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
> /* tvp5150 has some special limits */
> rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
> rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
> -
> - /* Calculate height based on current standard */
> - if (decoder->norm == V4L2_STD_ALL)
> - std = tvp5150_read_std(sd);
> - else
> - std = decoder->norm;
> -
> - if (std & V4L2_STD_525_60)
> - hmax = TVP5150_V_MAX_525_60;
> - else
> - hmax = TVP5150_V_MAX_OTHERS;
> + hmax = tvp5150_get_hmax(sd);
>
> /*
> * alignments:
> @@ -912,20 +955,18 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
> hmax - TVP5150_MAX_CROP_TOP - rect.top,
> hmax - rect.top, 0, 0);
>
> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
> - regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
> - rect.top + rect.height - hmax);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
> - rect.left >> TVP5150_CROP_SHIFT);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
> - rect.left | (1 << TVP5150_CROP_SHIFT));
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
> - (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
> - TVP5150_CROP_SHIFT);
> - regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
> - rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
> + __crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
> + sel->which);
> +
> + /*
> + * Update output image size if the selection (crop) rectangle size or
> + * position has been modified.
> + */
> + if (!v4l2_rect_equal(&rect, __crop))
> + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> + __tvp5150_set_selection(sd, rect);
>
> - decoder->rect = rect;
> + *__crop = rect;
>
> return 0;
> }
> @@ -937,9 +978,6 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
> struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
> v4l2_std_id std;
>
> - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> - return -EINVAL;
> -
> switch (sel->target) {
> case V4L2_SEL_TGT_CROP_BOUNDS:
> case V4L2_SEL_TGT_CROP_DEFAULT:
> @@ -958,7 +996,8 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
> sel->r.height = TVP5150_V_MAX_OTHERS;
> return 0;
> case V4L2_SEL_TGT_CROP:
> - sel->r = decoder->rect;
> + sel->r = *__tvp5150_get_pad_crop(decoder, cfg, sel->pad,
> + sel->which);
> return 0;
> default:
> return -EINVAL;
Thanks,
Mauro
