On Wed, Feb 18, 2009 at 09:25:07AM +0100, Rudy Zijlstra wrote: > > It then dawned on my why the 115-only results were so bad. I had left > > the 4-way splitter output used for the x50s unterminated. Sure > > enough, if I disconnected the x50s, I reproduced the severe errors. I > > didn't tear everything back apart to verify it, but I believe the 115s > > would work fine by themselves if I terminated the cables properly. > > > > Have you ever checked signal levels? May sound strange, but too high > signal levels also cause this type of problems.
No. On multiple occasions, though, I have tried adjusting the amplification on the splitter from min to max and multiple settings in between. It never made any difference as far as I could see. David -- David Engel da...@istwok.net -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
