I then removed the 250 from slot 4 leaving the 115s in slots 1 and 2.
The ber was through the roof and the recorded strams were filled with
errors and were barely playable at best.
This ^^^^ is bad, you have something wrong with your feeds. They're probably
over amp'd and your leaking RF like crazy.
Go back to basics, put the single unsplit and unamped feed into a single 115 and
get that working reliably. Then, split (or amp) and try the second 115.
Try to work out what's causing BER to be > 0 and fix that first.
Personally, I wouldn't add the 250/350 back into the system until I had both
115's running flawlessly with 0 BER and 0 UNC.
Chances are, the 250/350 will work correctly after this - unless the drivers
really do have a DMA issue. It's too early to say given the BER/UNC issues
you're seeing though.
- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
