On Wed, Feb 28, 2024 at 05:01:20PM -0800, Atish Patra wrote:
> SBI v2.0 SBI introduced PMU snapshot feature which adds the following
> features.
>
> 1. Read counter values directly from the shared memory instead of
> csr read.
> 2. Start multiple counters with initial values with one SBI call.
>
> These functionalities optimizes the number of traps to the higher
> privilege mode. If the kernel is in VS mode while the hypervisor
> deploy trap & emulate method, this would minimize all the hpmcounter
> CSR read traps. If the kernel is running in S-mode, the benefits
> reduced to CSR latency vs DRAM/cache latency as there is no trap
> involved while accessing the hpmcounter CSRs.
>
> In both modes, it does saves the number of ecalls while starting
> multiple counter together with an initial values. This is a likely
> scenario if multiple counters overflow at the same time.
>
> Acked-by: Palmer Dabbelt <pal...@rivosinc.com>
> Reviewed-by: Anup Patel <a...@brainfault.org>
> Reviewed-by: Conor Dooley <conor.doo...@microchip.com>
> Signed-off-by: Atish Patra <ati...@rivosinc.com>
> ---
> drivers/perf/riscv_pmu.c | 1 +
> drivers/perf/riscv_pmu_sbi.c | 209 +++++++++++++++++++++++++++++++--
> include/linux/perf/riscv_pmu.h | 6 +
> 3 files changed, 204 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
> index 0dda70e1ef90..5b57acb770d3 100644
> --- a/drivers/perf/riscv_pmu.c
> +++ b/drivers/perf/riscv_pmu.c
> @@ -412,6 +412,7 @@ struct riscv_pmu *riscv_pmu_alloc(void)
> cpuc->n_events = 0;
> for (i = 0; i < RISCV_MAX_COUNTERS; i++)
> cpuc->events[i] = NULL;
> + cpuc->snapshot_addr = NULL;
> }
> pmu->pmu = (struct pmu) {
> .event_init = riscv_pmu_event_init,
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index ea0fdb589f0d..8de5721e8019 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -36,6 +36,9 @@ PMU_FORMAT_ATTR(event, "config:0-47");
> PMU_FORMAT_ATTR(firmware, "config:63");
>
> static bool sbi_v2_available;
> +static DEFINE_STATIC_KEY_FALSE(sbi_pmu_snapshot_available);
> +#define sbi_pmu_snapshot_available() \
> + static_branch_unlikely(&sbi_pmu_snapshot_available)
>
> static struct attribute *riscv_arch_formats_attr[] = {
> &format_attr_event.attr,
> @@ -485,14 +488,100 @@ static int pmu_sbi_event_map(struct perf_event *event,
> u64 *econfig)
> return ret;
> }
>
> +static void pmu_sbi_snapshot_free(struct riscv_pmu *pmu)
> +{
> + int cpu;
> +
> + for_each_possible_cpu(cpu) {
> + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events,
> cpu);
> +
> + if (!cpu_hw_evt->snapshot_addr)
> + continue;
> +
> + free_page((unsigned long)cpu_hw_evt->snapshot_addr);
> + cpu_hw_evt->snapshot_addr = NULL;
> + cpu_hw_evt->snapshot_addr_phys = 0;
> + }
> +}
> +
> +static int pmu_sbi_snapshot_alloc(struct riscv_pmu *pmu)
> +{
> + int cpu;
> + struct page *snapshot_page;
> +
> + for_each_possible_cpu(cpu) {
> + struct cpu_hw_events *cpu_hw_evt = per_cpu_ptr(pmu->hw_events,
> cpu);
> +
> + if (cpu_hw_evt->snapshot_addr)
> + continue;
> +
> + snapshot_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
> + if (!snapshot_page) {
> + pmu_sbi_snapshot_free(pmu);
> + return -ENOMEM;
> + }
> + cpu_hw_evt->snapshot_addr = page_to_virt(snapshot_page);
> + cpu_hw_evt->snapshot_addr_phys = page_to_phys(snapshot_page);
> + }
> +
> + return 0;
> +}
> +
> +static void pmu_sbi_snapshot_disable(void)
> +{
> + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM, -1,
> + -1, 0, 0, 0, 0);
> +}
> +
> +static int pmu_sbi_snapshot_setup(struct riscv_pmu *pmu, int cpu)
> +{
> + struct cpu_hw_events *cpu_hw_evt;
> + struct sbiret ret = {0};
> +
> + cpu_hw_evt = per_cpu_ptr(pmu->hw_events, cpu);
> + if (!cpu_hw_evt->snapshot_addr_phys)
> + return -EINVAL;
> +
> + if (cpu_hw_evt->snapshot_set_done)
> + return 0;
> +
> + if (IS_ENABLED(CONFIG_32BIT))
> + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM,
> + cpu_hw_evt->snapshot_addr_phys,
> + (u64)(cpu_hw_evt->snapshot_addr_phys) >> 32, 0,
> 0, 0, 0);
> + else
> + ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_SNAPSHOT_SET_SHMEM,
> + cpu_hw_evt->snapshot_addr_phys, 0, 0, 0, 0, 0);
> +
> + /* Free up the snapshot area memory and fall back to SBI PMU calls
> without snapshot */
> + if (ret.error) {
> + if (ret.error != SBI_ERR_NOT_SUPPORTED)
> + pr_warn("pmu snapshot setup failed with error %ld\n",
> ret.error);
> + return sbi_err_map_linux_errno(ret.error);
> + }
> +
> + cpu_hw_evt->snapshot_set_done = true;
> +
> + return 0;
> +}
> +
> static u64 pmu_sbi_ctr_read(struct perf_event *event)
> {
> struct hw_perf_event *hwc = &event->hw;
> int idx = hwc->idx;
> struct sbiret ret;
> u64 val = 0;
> + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu);
> + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr;
> union sbi_pmu_ctr_info info = pmu_ctr_list[idx];
>
> + /* Read the value from the shared memory directly */
> + if (sbi_pmu_snapshot_available()) {
> + val = sdata->ctr_values[idx];
> + return val;
> + }
> +
> if (pmu_sbi_is_fw_event(event)) {
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
> hwc->idx, 0, 0, 0, 0, 0);
> @@ -539,6 +628,7 @@ static void pmu_sbi_ctr_start(struct perf_event *event,
> u64 ival)
> struct hw_perf_event *hwc = &event->hw;
> unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
>
> + /* There is no benefit setting SNAPSHOT FLAG for a single counter */
> #if defined(CONFIG_32BIT)
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, hwc->idx,
> 1, flag, ival, ival >> 32, 0);
> @@ -559,16 +649,36 @@ static void pmu_sbi_ctr_stop(struct perf_event *event,
> unsigned long flag)
> {
> struct sbiret ret;
> struct hw_perf_event *hwc = &event->hw;
> + struct riscv_pmu *pmu = to_riscv_pmu(event->pmu);
> + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr;
>
> if ((hwc->flags & PERF_EVENT_FLAG_USER_ACCESS) &&
> (hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT))
> pmu_sbi_reset_scounteren((void *)event);
>
> + if (sbi_pmu_snapshot_available())
> + flag |= SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT;
> +
> ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1,
> flag, 0, 0, 0);
> - if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
> - flag != SBI_PMU_STOP_FLAG_RESET)
> + if (!ret.error && sbi_pmu_snapshot_available()) {
> + /*
> + * The counter snapshot is based on the index base specified by
> hwc->idx.
> + * The actual counter value is updated in shared memory at
> index 0 when counter
> + * mask is 0x01. To ensure accurate counter values, it's
> necessary to transfer
> + * the counter value to shared memory. However, if hwc->idx is
> zero, the counter
> + * value is already correctly updated in shared memory,
> requiring no further
> + * adjustment.
> + */
> + if (hwc->idx > 0) {
> + sdata->ctr_values[hwc->idx] = sdata->ctr_values[0];
> + sdata->ctr_values[0] = 0;
> + }
> + } else if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
> + flag != SBI_PMU_STOP_FLAG_RESET) {
> pr_err("Stopping counter idx %d failed with error %d\n",
> hwc->idx, sbi_err_map_linux_errno(ret.error));
> + }
> }
>
> static int pmu_sbi_find_num_ctrs(void)
> @@ -626,10 +736,14 @@ static inline void pmu_sbi_stop_all(struct riscv_pmu
> *pmu)
> static inline void pmu_sbi_stop_hw_ctrs(struct riscv_pmu *pmu)
> {
> struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> + unsigned long flag = 0;
> +
> + if (sbi_pmu_snapshot_available())
> + flag = SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT;
>
> /* No need to check the error here as we can't do anything about the
> error */
> sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, 0,
> - cpu_hw_evt->used_hw_ctrs[0], 0, 0, 0, 0);
> + cpu_hw_evt->used_hw_ctrs[0], flag, 0, 0, 0);
> }
>
> /*
> @@ -638,11 +752,10 @@ static inline void pmu_sbi_stop_hw_ctrs(struct
> riscv_pmu *pmu)
> * while the overflowed counters need to be started with updated
> initialization
> * value.
> */
> -static inline void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu,
> - unsigned long ctr_ovf_mask)
> +static noinline void pmu_sbi_start_ovf_ctrs_sbi(struct cpu_hw_events
> *cpu_hw_evt,
> + unsigned long ctr_ovf_mask)
> {
> int idx = 0;
> - struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> struct perf_event *event;
> unsigned long flag = SBI_PMU_START_FLAG_SET_INIT_VALUE;
> unsigned long ctr_start_mask = 0;
> @@ -677,6 +790,49 @@ static inline void pmu_sbi_start_overflow_mask(struct
> riscv_pmu *pmu,
> }
> }
>
> +static noinline void pmu_sbi_start_ovf_ctrs_snapshot(struct cpu_hw_events
> *cpu_hw_evt,
> + unsigned long ctr_ovf_mask)
> +{
> + int idx = 0;
> + struct perf_event *event;
> + unsigned long flag = SBI_PMU_START_FLAG_INIT_FROM_SNAPSHOT;
> + u64 max_period, init_val = 0;
> + struct hw_perf_event *hwc;
> + unsigned long ctr_start_mask = 0;
> + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr;
> +
> + for_each_set_bit(idx, cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS) {
> + if (ctr_ovf_mask & (1 << idx)) {
nit: BIT(idx)
> + event = cpu_hw_evt->events[idx];
> + hwc = &event->hw;
> + max_period = riscv_pmu_ctr_get_width_mask(event);
> + init_val = local64_read(&hwc->prev_count) & max_period;
> + sdata->ctr_values[idx] = init_val;
> + }
> + /*
> + * We donot need to update the non-overflow counters the
> previous
do not
> + * value should have been there already.
> + */
> + }
> +
> + ctr_start_mask = cpu_hw_evt->used_hw_ctrs[0];
> +
> + /* Start all the counters in a single shot */
> + sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_START, 0, ctr_start_mask,
> + flag, 0, 0, 0);
I think we should always loop over all words of used_hw_ctrs[] since it'll
have more than one for riscv32. Hmm, it seems like there are several
places where we don't expect riscv32's second word to be used...
> +}
> +
> +static void pmu_sbi_start_overflow_mask(struct riscv_pmu *pmu,
> + unsigned long ctr_ovf_mask)
> +{
> + struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> +
> + if (sbi_pmu_snapshot_available())
> + pmu_sbi_start_ovf_ctrs_snapshot(cpu_hw_evt, ctr_ovf_mask);
> + else
> + pmu_sbi_start_ovf_ctrs_sbi(cpu_hw_evt, ctr_ovf_mask);
> +}
> +
> static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
> {
> struct perf_sample_data data;
> @@ -690,6 +846,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
> unsigned long overflowed_ctrs = 0;
> struct cpu_hw_events *cpu_hw_evt = dev;
> u64 start_clock = sched_clock();
> + struct riscv_pmu_snapshot_data *sdata = cpu_hw_evt->snapshot_addr;
>
> if (WARN_ON_ONCE(!cpu_hw_evt))
> return IRQ_NONE;
> @@ -711,8 +868,10 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void
> *dev)
> pmu_sbi_stop_hw_ctrs(pmu);
>
> /* Overflow status register should only be read after counter are
> stopped */
> - ALT_SBI_PMU_OVERFLOW(overflow);
> -
> + if (sbi_pmu_snapshot_available())
> + overflow = sdata->ctr_overflow_mask;
> + else
> + ALT_SBI_PMU_OVERFLOW(overflow);
> /*
> * Overflow interrupt pending bit should only be cleared after stopping
> * all the counters to avoid any race condition.
> @@ -794,6 +953,9 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct
> hlist_node *node)
> enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
> }
>
> + if (sbi_pmu_snapshot_available())
> + return pmu_sbi_snapshot_setup(pmu, cpu);
> +
> return 0;
> }
>
> @@ -807,6 +969,9 @@ static int pmu_sbi_dying_cpu(unsigned int cpu, struct
> hlist_node *node)
> /* Disable all counters access for user mode now */
> csr_write(CSR_SCOUNTEREN, 0x0);
>
> + if (sbi_pmu_snapshot_available())
> + pmu_sbi_snapshot_disable();
> +
> return 0;
> }
>
> @@ -1076,10 +1241,6 @@ static int pmu_sbi_device_probe(struct platform_device
> *pdev)
> pmu->event_unmapped = pmu_sbi_event_unmapped;
> pmu->csr_index = pmu_sbi_csr_index;
>
> - ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING,
> &pmu->node);
> - if (ret)
> - return ret;
> -
> ret = riscv_pm_pmu_register(pmu);
> if (ret)
> goto out_unregister;
> @@ -1088,8 +1249,32 @@ static int pmu_sbi_device_probe(struct platform_device
> *pdev)
> if (ret)
> goto out_unregister;
>
> + /* SBI PMU Snapsphot is only available in SBI v2.0 */
> + if (sbi_v2_available) {
> + ret = pmu_sbi_snapshot_alloc(pmu);
> + if (ret)
> + goto out_unregister;
> +
> + ret = pmu_sbi_snapshot_setup(pmu, smp_processor_id());
> + if (!ret) {
> + pr_info("SBI PMU snapshot detected\n");
> + /*
> + * We enable it once here for the boot cpu. If snapshot
> shmem setup
> + * fails during cpu hotplug process, it will fail to
> start the cpu
> + * as we can not handle hetergenous PMUs with different
> snapshot
> + * capability.
> + */
> + static_branch_enable(&sbi_pmu_snapshot_available);
> + }
> + /* Snapshot is an optional feature. Continue if not available */
> + }
> +
> register_sysctl("kernel", sbi_pmu_sysctl_table);
>
> + ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING,
> &pmu->node);
> + if (ret)
> + return ret;
> +
> return 0;
>
> out_unregister:
> diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
> index 43282e22ebe1..c3fa90970042 100644
> --- a/include/linux/perf/riscv_pmu.h
> +++ b/include/linux/perf/riscv_pmu.h
> @@ -39,6 +39,12 @@ struct cpu_hw_events {
> DECLARE_BITMAP(used_hw_ctrs, RISCV_MAX_COUNTERS);
> /* currently enabled firmware counters */
> DECLARE_BITMAP(used_fw_ctrs, RISCV_MAX_COUNTERS);
> + /* The virtual address of the shared memory where counter snapshot will
> be taken */
> + void *snapshot_addr;
> + /* The physical address of the shared memory where counter snapshot
> will be taken */
> + phys_addr_t snapshot_addr_phys;
> + /* Boolean flag to indicate setup is already done */
> + bool snapshot_set_done;
Instead of the 'snapshot_set_done' boolean, we can just use
snapshot_addr, which can't be NULL after setup.
> };
>
> struct riscv_pmu {
> --
> 2.34.1
>
Thanks,
drew
