I am not able to boot the 2.6.13 version of the kernel. I've tried different
systems, tried downloading again, still nothing. Here's the last thing I see
from the serial port:
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
input: AT Translated Set 2 keyboard on isa0060/serio0
VFS: Mounted root (ext2 filesystem).
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse on isa0060/serio1
SCSI subsystem initialized
Fusion MPT base driver 3.03.02
Copyright (c) 1999-2005 LSI Logic Corporation
The console shows the reiserfs module loaded and then the message
waiting for /dev/sda2 to appear
It then dumps a list of devices and sda is not one of them. I've attached the
entire boot log if any one is interested.
I've tried statically linking cciss on another system and the same basic
results. Apparently, MPT cannot be statically linked unless I missed something.
What do I have to do to get 2.6.13 to boot up?
Thanks,
mikem
crap
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0
(rev 09)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0
(rev 09)
0000:00:05.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B1
(rev 09)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
(rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
(rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
(rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
(rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI
Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
Storage Controller (rev 02)
0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights
Out Controller (rev 01)
0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights
Out Processor (rev 01)
0000:02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:03:02.0 RAID bus controller: Hewlett-Packard Company: Unknown device 3220
0000:03:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
0000:03:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
0000:07:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 02)
0000:07:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703
Gigabit Ethernet (rev 10)
0000:08:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx
(rev 01)
0000:08:05.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx
(rev 01)
0000:0b:00.0 RAID bus controller: Hewlett-Packard Company: Unknown device 3230
(rev 01)
Module Size Used by
joydev 12416 0
sg 43960 0
st 42660 0
sr_mod 20004 0
floppy 66000 0
ipv6 280192 17
ehci_hcd 35848 0
hw_random 7072 0
cciss 48392 0
uhci_hcd 34336 0
evdev 11776 0
usbcore 130192 3 ehci_hcd,uhci_hcd
tg3 88708 0
dm_mod 63808 0
reiserfs 253680 1
mptscsih 38836 0
mptbase 46944 1 mptscsih
sd_mod 20352 3
scsi_mod 148176 6 sg,st,sr_mod,cciss,mptscsih,sd_mod
md: stopping all md devices.
md: md0 switched to read-only mode.
Restarting system.
machine restart
machine restart
????????????????? ????????f?x??
ProLiant System BIOS - P50 (12/02/2004)
Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. 5120 MB Detected
Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup system ROM.
5120 MB Initialized / 5120 MB Detected
ProLiant System BIOS - P50 (12/02/2004)
Copyright 1982, 2004 Hewlett-Packard Development Group, L.P.
Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup system ROM.
LSI Logic Corp. MPT BIOS
Copyright 1995-2004 LSI Logic Corp.
MPTBIOS-5.05.18
HP Build
<<<Press F8 for configuration options>>>
Searching for device at HBA 0, ID 0, LUN 0
Searching for device at HBA 0, ID 0, LUN 1 Searching for
device at HBA 0, ID 0, LUN 2 Searching for device at HBA
0, ID 0, LUN 3 Searching for device at HBA 0, ID 0, LUN
4 Searching for device at HBA 0, ID 0, LUN 5
Searching for device at HBA 0, ID 0, LUN 6
Searching for device at HBA 0, ID 0, LUN 7
Searching for device at HBA 0, ID 1, LUN 0
Searching for
device at HBA 0, ID 2, LUN 0
Searching for device at HBA 0, ID 3, LUN 0
Searching for device at HBA
0, ID 4, LUN 0
Searching for device at HBA 0, ID 5, LUN 0
Searching for device at HBA 0, ID 6, LUN 0
Searching
for device at HBA 0, ID 8, LUN 0
Searching for device at HBA 0, ID 9, LUN 0
Searching for device at
HBA 0, ID 10, LUN 0
Searching for device at HBA 0, ID 11, LUN 0
Searching for device at HBA 0, ID 12,
LUN 0
Searching for device at HBA 0, ID 13, LUN 0
Searching for device at HBA 0, ID 14, LUN 0
Searching for
device at HBA 0, ID 15, LUN 0
HBA ID LUN VENDOR PRODUCT REV SYNC WIDE
CAPACITY
--- -- --- -------- ---------------- -------- ----- ---- ------------
0 0 0 COMPAQ BD0186349B 3B12 80.0 16 18 GB *
0 7 0 LSILogic LSI1030-IT 1032700 320.0 16
List of non INT13 devices from additional channels:
Slot Port ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY
---- ---- -- --- -------- ---------------- -------- ----- ---- ------------
0 01 7 0 LSILogic LSI1030-IT 1032700 320.0 16
This device has been validated to run at 80MB/s and should support,
(*) 160MB/s, when the operating system is loaded.
LSI Logic Corp. MPT boot ROM successfully installed!
Integrated Lights-Out press [F8] to configure
1.70 Feb 11 2005
Slot 2 HP Smart
Array P600 Controller Initializing...
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB,
v1.20) 1 Logical Drive
Press <F8> to run the Option ROM Configuration for Arrays Utility
Press <ESC> to skip configuration and continue
Slot 3 HP Smart
Array 6400 Controller Initializing...
\|/-\|/-\|/-\|/-\| (192MB, v2.46) 1 Logical
Drive
Press <F8> to run the Option ROM Configuration for Arrays Utility
Press <ESC> to skip configuration and continue
Slot 3 HP Smart
Array 6400 EM Controller Initializing...
-\|/-\|/-\|/-\|/-\| (192MB, v2.46) 0 Logical
Drives
1785-Slot 3 Drive Array Not Configured
No Drives Detected
Slot 5 HP Smart
Array P400 Controller Initializing...
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB,
v0.13) 0 Logical Drives
1785-Slot 5 Drive Array Not Configured
No Drives Detected
HP Ethernet Boot Agent v7.0.3
Copyright (C) 2000,2003 Hewlett-Packard Development Company, L.P.
All rights reserved.
Press Ctrl-S to Enter Configuration Menu ...
Press "F9" key for ROM-Based Setup Utility
Press "F10" key for System Maintenance Menu
Press "F12" key for PXE boot
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for System Maintenance Menu
Press "ESC+@" for PXE boot
Attempting Boot FromCD-ROMAttempting Boot FromFloppy Drive (A:)Attempting Boot
FromHard Drive (C:)GRUB Loading stage2..
Initializing gfx code...
Memory: 0x34950 - 0x63f80, img data at 0x40e90
kernel (hd0,1)/boot/vmlinuz-2613-pass2 root=/dev/sda2 vga=0x31a selinux=0 cons
ole=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq
[Linux-bzImage, setup=0x1c00, size=0x1ab701]
initrd (hd0,1)/boot/initrd-2613-pass2
[Linux-initrd @ 0x37e8b000, 0x164fbf bytes]
Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0
console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq)
Linux version 2.6.13 ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE Linux)) #1
SMP Thu Sep 8 15:51:41 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000015bfff000 (usable)
No NUMA configuration found
Faking a node at 0000000000000000-000000015bfff000
Bootmem setup node 0 0000000000000000-000000015bfff000
ACPI: PM-Timer IO Port: 0x908
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80100] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80100, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Checking aperture...
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200
console=tty0 resume=/dev/sda3 elevator=cfq
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 3400.271 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x689d000 - 0x889d000
Memory: 5047236k/5701628k available (2402k kernel code, 0k reserved, 1210k
data, 220k init)
Calibrating delay using timer specific routine.. 6810.87 BogoMIPS (lpj=13621745)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6800.69 BogoMIPS (lpj=13601395)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.40GHz stepping 04
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -132 cycles, maxerr 935 cycles)
Brought up 2 CPUs
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
PCI: Cannot allocate resource region 4 of device 0000:00:1d.2
PCI: Cannot allocate resource region 4 of device 0000:00:1d.3
PCI: Bridge: 0000:02:00.0
IO window: 4000-4fff
MEM window: fdb00000-fdbfffff
PREFETCH window: e0000000-e02fffff
PCI: Bridge: 0000:07:01.0
IO window: 5000-5fff
MEM window: fdd00000-fddfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
IO window: 5000-5fff
MEM window: fdc00000-fddfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 4000-5fff
MEM window: fdb00000-fddfffff
PREFETCH window: e0000000-e02fffff
PCI: Bridge: 0000:00:04.0
IO window: 6000-6fff
MEM window: fde00000-fdffffff
PREFETCH window: e0300000-e03fffff
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
????????????????? ????????f?x??
ProLiant System BIOS - P50 (12/02/2004)
Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. 5120 MB Detected
Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup system ROM.
5120 MB Initialized / 5120 MB Detected
ProLiant System BIOS - P50 (12/02/2004)
Copyright 1982, 2004 Hewlett-Packard Development Group, L.P.
Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2)
Advanced Memory Protection Mode: Advanced ECC Support
Redundant ROM Detected - This system contains a valid backup system ROM.
LSI Logic Corp. MPT BIOS
Copyright 1995-2004 LSI Logic Corp.
MPTBIOS-5.05.18
HP Build
<<<Press F8 for configuration options>>>
Searching for device at HBA 0, ID 0, LUN 0
Spinning up the device!
Searching for device at HBA 0, ID 0, LUN 1 Searching for
device at HBA 0, ID 0, LUN 2 Searching for device at HBA
0, ID 0, LUN 3 Searching for device at HBA 0, ID 0, LUN
4 Searching for device at HBA 0, ID 0, LUN 5
Searching for device at HBA 0, ID 0, LUN 6
Searching for device at HBA 0, ID 0, LUN 7
Searching for device at HBA 0, ID 1, LUN 0
Searching for
device at HBA 0, ID 2, LUN 0
Searching for device at HBA 0, ID 3, LUN 0
Searching for device at HBA
0, ID 4, LUN 0
Searching for device at HBA 0, ID 5, LUN 0
Searching for device at HBA 0, ID 6, LUN 0
Searching
for device at HBA 0, ID 8, LUN 0
Searching for device at HBA 0, ID 9, LUN 0
Searching for device at
HBA 0, ID 10, LUN 0
Searching for device at HBA 0, ID 11, LUN 0
Searching for device at HBA 0, ID 12,
LUN 0
Searching for device at HBA 0, ID 13, LUN 0
Searching for device at HBA 0, ID 14, LUN 0
Searching for
device at HBA 0, ID 15, LUN 0
Searching for device at HBA 0, ID 0, LUN 0
HBA ID LUN VENDOR
PRODUCT REV SYNC WIDE CAPACITY
--- -- --- -------- ---------------- -------- ----- ---- ------------
0 0 0 COMPAQ BD0186349B 3B12 80.0 16 18 GB *
0 7 0 LSILogic LSI1030-IT 1032700 320.0 16
List of non INT13 devices from additional channels:
Slot Port ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY
---- ---- -- --- -------- ---------------- -------- ----- ---- ------------
0 01 7 0 LSILogic LSI1030-IT 1032700 320.0 16
This device has been validated to run at 80MB/s and should support,
(*) 160MB/s, when the operating system is loaded.
LSI Logic Corp. MPT boot ROM successfully installed!
Integrated Lights-Out press [F8] to configure
1.70 Feb 11 2005
Slot 2 HP Smart
Array P600 Controller Initializing...
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB,
v1.20) 1 Logical Drive
Press <F8> to run the Option ROM Configuration for Arrays Utility
Press <ESC> to skip configuration and continue
Slot 3 HP Smart
Array 6400 Controller Initializing...
\|/-\|/-\|/-\|/-\| (192MB, v2.46) 1 Logical
Drive
Press <F8> to run the Option ROM Configuration for Arrays Utility
Press <ESC> to skip configuration and continue
Slot 3 HP Smart
Array 6400 EM Controller Initializing...
-\|/-\|/-\|/-\|/-\| (192MB, v2.46) 0 Logical
Drives
1785-Slot 3 Drive Array Not Configured
No Drives Detected
Slot 5 HP Smart
Array P400 Controller Initializing...
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB,
v0.13) 0 Logical Drives
1785-Slot 5 Drive Array Not Configured
No Drives Detected
HP Ethernet Boot Agent v7.0.3
Copyright (C) 2000,2003 Hewlett-Packard Development Company, L.P.
All rights reserved.
Press Ctrl-S to Enter Configuration Menu ...
Press "F9" key for ROM-Based Setup Utility
Press "F10" key for System Maintenance Menu
Press "F12" key for PXE boot
For access via BIOS Serial Console
Press "ESC+9" for ROM-Based Setup Utility
Press "ESC+0" for System Maintenance Menu
Press "ESC+@" for PXE boot
Attempting Boot FromCD-ROMAttempting Boot FromFloppy Drive (A:)Attempting Boot
FromHard Drive (C:)GRUB Loading stage2..
Initializing gfx code...
Memory: 0x34950 - 0x63f80, img data at 0x40e90
kernel (hd0,1)/boot/vmlinuz-2613 root=/dev/sda2 vga=0x31a selinux=0 console=tt
yS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq
[Linux-bzImage, setup=0x1c00, size=0x18c960]
initrd (hd0,1)/boot/initrd-2613
[Linux-initrd @ 0x37d26000, 0x2c9f20 bytes]
Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0
console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq)
Linux version 2.6.13 ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE Linux)) #1
SMP Thu Sep 8 14:22:46 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable)
BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000015bfff000 (usable)
No NUMA configuration found
Faking a node at 0000000000000000-000000015bfff000
Bootmem setup node 0 0000000000000000-000000015bfff000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: HP <6>Product ID: PROLIANT <6>APIC at: 0xFEE00000
Processor #0 15:3 APIC version 20
I/O APIC #8 Version 17 at 0xFEC00000.
I/O APIC #9 Version 17 at 0xFEC80000.
I/O APIC #10 Version 17 at 0xFEC80100.
Setting APIC routing to flat
Processors: 1
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Checking aperture...
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200
console=tty0 resume=/dev/sda3 elevator=cfq
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3400.320 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x689d000 - 0x889d000
Memory: 5046156k/5701628k available (2098k kernel code, 0k reserved, 1214k
data, 200k init)
Calibrating delay using timer specific routine.. 6811.38 BogoMIPS (lpj=13622771)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
mtrr: v2.0 (20020519)
Using IO-APIC 8
Using IO-APIC 9
Using IO-APIC 10
Using local APICCtimer interrupts.
Detected 12.501 MHz APIC timer.
Brought up 1 CPUs
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 193
PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 185
PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 217
PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 58
PCI->APIC IRQ transform: 0000:03:03.0[A] -> IRQ 74
PCI->APIC IRQ transform: 0000:03:03.1[B] -> IRQ 50
PCI->APIC IRQ transform: 0000:07:03.0[A] -> IRQ 90
PCI: using PPB 0000:07:01.0[A] to get irq 50
PCI->APIC IRQ transform: 0000:08:04.0[A] -> IRQ 98
PCI: using PPB 0000:07:01.0[B] to get irq 57
PCI->APIC IRQ transform: 0000:08:05.0[B] -> IRQ 122
PCI->APIC IRQ transform: 0000:0b:00.0[A] -> IRQ 169
PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 201
PCI->APIC IRQ transform: 0000:01:04.2[B] -> IRQ 209
PCI: Cannot allocate resource region 4 of device 0000:00:1d.0
PCI: Cannot allocate resource region 4 of device 0000:00:1d.1
PCI: Cannot allocate resource region 4 of device 0000:00:1d.2
PCI: Cannot allocate resource region 4 of device 0000:00:1d.3
PCI: Bridge: 0000:02:00.0
IO window: 4000-4fff
MEM window: fdb00000-fdbfffff
PREFETCH window: e0000000-e02fffff
PCI: Bridge: 0000:07:01.0
IO window: 5000-5fff
MEM window: fdd00000-fddfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
IO window: 5000-5fff
MEM window: fdc00000-fddfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 4000-5fff
MEM window: fdb00000-fddfffff
PREFETCH window: e0000000-e02fffff
PCI: Bridge: 0000:00:04.0
IO window: 6000-6fff
MEM window: fde00000-fdffffff
PREFETCH window: e0300000-e03fffff
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-3fff
MEM window: fbf00000-fcffffff
PREFETCH window: e0400000-e04fffff
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1126195265.908:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity
IRQ lockup detection disabled
vesafb: framebuffer at 0xfc000000, mapped to 0xffffc20000080000, using 5120k,
total 8128k
vesafb: mode is 1280x1024x16, linelength=2560, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for fc000000,400000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,200000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,100000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,80000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,40000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,20000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,10000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,8000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,4000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,2000 old: uncachable new: write-combining
mtrr: type mismatch for fc000000,1000 old: uncachable new: write-combining
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
hda: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
input: AT Translated Set 2 keyboard on isa0060/serio0
VFS: Mounted root (ext2 filesystem).
logips2pp: Detected unknown logitech mouse model 1
input: PS/2 Logitech Mouse on isa0060/serio1
SCSI subsystem initialized
Fusion MPT base driver 3.03.02
Copyright (c) 1999-2005 LSI Logic Corporation
