Separate out the Sharp Zaurus c7x0 series specific code from corgi_ssp.c
so that other models such as the cxx00's can share it. Create sharpsl.h
which will be used to abstract machine/model specifics.
This enables the driver to be used by the Zaurus cxx00 series.
Signed-Off-by: Richard Purdie <[EMAIL PROTECTED]>
Index: linux-2.6.12/arch/arm/mach-pxa/corgi.c
===================================================================
--- linux-2.6.12.orig/arch/arm/mach-pxa/corgi.c 2005-08-26 11:06:27.000000000
+0100
+++ linux-2.6.12/arch/arm/mach-pxa/corgi.c 2005-08-27 20:03:45.000000000
+0100
@@ -41,6 +41,7 @@
#include <asm/hardware/scoop.h>
#include "generic.h"
+#include "sharpsl.h"
/*
@@ -94,6 +95,16 @@
.id = -1,
};
+struct corgissp_machinfo corgi_ssp_machinfo = {
+ .port = 1,
+ .cs_lcdcon = CORGI_GPIO_LCDCON_CS,
+ .cs_ads7846 = CORGI_GPIO_ADS7846_CS,
+ .cs_max1111 = CORGI_GPIO_MAX1111_CS,
+ .clk_lcdcon = 76,
+ .clk_ads7846 = 2,
+ .clk_max1111 = 8,
+};
+
/*
* Corgi Backlight Device
@@ -243,6 +254,8 @@
static void __init corgi_init(void)
{
+ corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+
pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
Index: linux-2.6.12/arch/arm/mach-pxa/corgi_ssp.c
===================================================================
--- linux-2.6.12.orig/arch/arm/mach-pxa/corgi_ssp.c 2005-08-26
11:05:52.000000000 +0100
+++ linux-2.6.12/arch/arm/mach-pxa/corgi_ssp.c 2005-08-27 13:23:42.000000000
+0100
@@ -1,7 +1,7 @@
/*
* SSP control code for Sharp Corgi devices
*
- * Copyright (c) 2004 Richard Purdie
+ * Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,14 +17,16 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/arch/ssp.h>
-#include <asm/arch/corgi.h>
#include <asm/arch/pxa-regs.h>
+#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
static struct ssp_dev corgi_ssp_dev;
static struct ssp_state corgi_ssp_state;
+static struct corgissp_machinfo *ssp_machinfo;
/*
* There are three devices connected to the SSP interface:
@@ -48,12 +51,12 @@
unsigned long ret,flag;
spin_lock_irqsave(&corgi_ssp_lock, flag);
- GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS);
+ GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
ssp_write_word(&corgi_ssp_dev,data);
ret = ssp_read_word(&corgi_ssp_dev);
- GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS);
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return ret;
@@ -66,12 +69,12 @@
void corgi_ssp_ads7846_lock(void)
{
spin_lock(&corgi_ssp_lock);
- GPCR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS);
+ GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
}
void corgi_ssp_ads7846_unlock(void)
{
- GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS);
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock(&corgi_ssp_lock);
}
@@ -97,23 +100,27 @@
*/
unsigned long corgi_ssp_dac_put(ulong data)
{
- unsigned long flag;
+ unsigned long flag, sscr1 = SSCR1_SPH;
spin_lock_irqsave(&corgi_ssp_lock, flag);
- GPCR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS);
+
+ if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
+ sscr1 = 0;
ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )),
SSCR1_SPH, 0, SSCR0_SerClkDiv(76));
+ ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )),
sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
ssp_enable(&corgi_ssp_dev);
+ GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_write_word(&corgi_ssp_dev,data);
/* Read null data back from device to prevent SSP overflow */
ssp_read_word(&corgi_ssp_dev);
+ GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0,
0, SSCR0_SerClkDiv(2));
+ ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0,
0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
- GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS);
+
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return 0;
@@ -141,9 +148,9 @@
int voltage,voltage1,voltage2;
spin_lock_irqsave(&corgi_ssp_lock, flag);
- GPCR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS);
+ GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0,
0, SSCR0_SerClkDiv(8));
+ ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0,
0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
ssp_enable(&corgi_ssp_dev);
udelay(1);
@@ -161,9 +168,9 @@
voltage2=ssp_read_word(&corgi_ssp_dev);
ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0,
0, SSCR0_SerClkDiv(2));
+ ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0,
0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
- GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS);
+ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
if (voltage1 & 0xc0 || voltage2 & 0x3f)
@@ -179,25 +186,31 @@
/*
* Support Routines
*/
-int __init corgi_ssp_probe(struct device *dev)
+
+void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
+{
+ ssp_machinfo=machinfo;
+}
+
+static int __init corgi_ssp_probe(struct device *dev)
{
int ret;
/* Chip Select - Disable All */
- GPDR0 |= GPIO_bit(CORGI_GPIO_LCDCON_CS); /* output */
- GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD
Control/Timing Gen */
- GPDR0 |= GPIO_bit(CORGI_GPIO_MAX1111_CS); /* output */
- GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable MAX1111*/
- GPDR0 |= GPIO_bit(CORGI_GPIO_ADS7846_CS); /* output */
- GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable ADS7846*/
+ GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /*
output */
+ GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /*
High - Disable LCD Control/Timing Gen */
+ GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111);
/* output */
+ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
/* High - Disable MAX1111*/
+ GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846);
/* output */
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
/* High - Disable ADS7846*/
- ret=ssp_init(&corgi_ssp_dev,1);
+ ret=ssp_init(&corgi_ssp_dev,ssp_machinfo->port);
if (ret)
printk(KERN_ERR "Unable to register SSP handler!\n");
else {
ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b
)), 0, 0, SSCR0_SerClkDiv(2));
+ ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b
)), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
}
@@ -222,9 +235,9 @@
static int corgi_ssp_resume(struct device *dev, u32 level)
{
if (level == RESUME_POWER_ON) {
- GPSR0 = GPIO_bit(CORGI_GPIO_LCDCON_CS); /* High - Disable LCD
Control/Timing Gen */
- GPSR0 = GPIO_bit(CORGI_GPIO_MAX1111_CS); /* High - Disable
MAX1111*/
- GPSR0 = GPIO_bit(CORGI_GPIO_ADS7846_CS); /* High - Disable
ADS7846*/
+ GPSR(ssp_machinfo->cs_lcdcon) =
GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
+ GPSR(ssp_machinfo->cs_max1111) =
GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+ GPSR(ssp_machinfo->cs_ads7846) =
GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
ssp_enable(&corgi_ssp_dev);
}
Index: linux-2.6.12/arch/arm/mach-pxa/sharpsl.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12/arch/arm/mach-pxa/sharpsl.h 2005-08-27 19:58:43.000000000
+0100
@@ -0,0 +1,16 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+struct corgissp_machinfo {
+ int port;
+ int cs_lcdcon;
+ int cs_ads7846;
+ int cs_max1111;
+ int clk_lcdcon;
+ int clk_ads7846;
+ int clk_max1111;
+};
+
+void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
+
Index: linux-2.6.12/include/asm-arm/arch-pxa/corgi.h
===================================================================
--- linux-2.6.12.orig/include/asm-arm/arch-pxa/corgi.h 2005-08-26
11:05:52.000000000 +0100
+++ linux-2.6.12/include/asm-arm/arch-pxa/corgi.h 2005-08-27
19:57:45.000000000 +0100
@@ -106,17 +106,5 @@
extern struct platform_device corgissp_device;
extern struct platform_device corgifb_device;
-/*
- * External Functions
- */
-extern unsigned long corgi_ssp_ads7846_putget(unsigned long);
-extern unsigned long corgi_ssp_ads7846_get(void);
-extern void corgi_ssp_ads7846_put(unsigned long data);
-extern void corgi_ssp_ads7846_lock(void);
-extern void corgi_ssp_ads7846_unlock(void);
-extern void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-extern void corgi_ssp_blduty_set(int duty);
-extern int corgi_ssp_max1111_get(unsigned long data);
-
#endif /* __ASM_ARCH_CORGI_H */
Index: linux-2.6.12/include/asm-arm/arch-pxa/sharpsl.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12/include/asm-arm/arch-pxa/sharpsl.h 2005-08-27
20:04:53.000000000 +0100
@@ -0,0 +1,12 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
