Hi Mark,
On Fri, Aug 21, 2015 at 07:40:59PM +0100, Mark Rutland wrote:
> On Wed, Aug 19, 2015 at 10:37:35AM +0100, Leo Yan wrote:
> > On Hi6220, below memory regions in DDR have specific purpose:
> >
> > 0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
> > 0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
> > 0x06df,f000 - 0x06df,ffff: For mailbox message data.
> >
> > This patch reserves these memory regions and add device node for
> > mailbox in dts.
> >
> > Signed-off-by: Leo Yan <leo....@linaro.org>
> > ---
> > arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 20 +++++++++++++++++---
> > arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 8 ++++++++
> > 2 files changed, 25 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > index e36a539..d5470d3 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > @@ -7,9 +7,6 @@
> >
> > /dts-v1/;
> >
> > -/*Reserved 1MB memory for MCU*/
> > -/memreserve/ 0x05e00000 0x00100000;
> > -
> > #include "hi6220.dtsi"
> >
> > / {
> > @@ -28,4 +25,21 @@
> > device_type = "memory";
> > reg = <0x0 0x0 0x0 0x40000000>;
> > };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + mcu-buf@05e00000 {
> > + no-map;
> > + reg = <0x0 0x05e00000 0x0 0x00100000>, /* MCU firmware
> > buffer */
> > + <0x0 0x0740f000 0x0 0x00001000>; /* MCU firmware
> > section */
> > + };
> > +
> > + mbox-buf@06dff000 {
> > + no-map;
> > + reg = <0x0 0x06dff000 0x0 0x00001000>; /* Mailbox
> > message buf */
> > + };
> > + };
>
> As far as I can see, it would be simpler to simply carve these out of the
> memory node.
Will modify for MCU firmware buffer and section.
> I don't see why you need reserved-memory here, given you're not referring to
> these regions by phandle anyway.
mbox-buf is used by below mailbox's node, but the start address has
been truncated with 4KB alignment; so should keep it, right?
Thanks,
Leo Yan
> > };
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > index 3f03380..9ff25bc 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> > @@ -167,5 +167,13 @@
> > clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
> > clock-names = "uartclk", "apb_pclk";
> > };
> > +
> > + mailbox: mailbox@f7510000 {
> > + #mbox-cells = <1>;
> > + compatible = "hisilicon,hi6220-mbox";
> > + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
> > + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
> > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > };
> > };
> > --
> > 1.9.1
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
