On Fri, 14 Aug 2015 22:45:14 +0200
Marek Vasut <ma...@denx.de> wrote:
> On Friday, August 14, 2015 at 07:35:39 PM, Alexis Ballier wrote:
> > It is a 256KiB flash with 4 KiB erase sectors
> > and 64KiB overlay blocks.
> >
> > This is the one available on Hardkernel's Odroid U3 shield.
> >
> > Signed-off-by: Alexis Ballier <aball...@gentoo.org>
> > ---
> > drivers/mtd/spi-nor/spi-nor.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c
> > b/drivers/mtd/spi-nor/spi-nor.c index d78831b..e521b35 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -636,6 +636,7 @@ static const struct spi_device_id spi_nor_ids[]
> > = { { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K |
> > SST_WRITE)
> },
> > { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K
> > | SST_WRITE)
> },
> > { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K
> > | SST_WRITE)
> },
> > + { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4,
> > SECT_4K) },
>
> Is the SST_WRITE not needed on this device ?
Tried that at first and it didn't work (writes were silently not
performed).
I'm no expert here, but I don't see anything about auto address
increment in the spec:
http://ww1.microchip.com/downloads/en/DeviceDoc/20005139E.pdf
and it uses the page program command (0x02).
Alexis.
[...]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
