Hello List, I'm seeing trouble with a firewire HDD enclosure.
precious:/sys/bus/ieee1394/devices/0001a350000154d5# cat vendor* 0x0001a3 337 COMBO GENESYS LOGIC, INC. precious:/sys/bus/ieee1394/devices/0001a350000154d5# cat guid* 0x0001a350000154d5 0x0001a3 GENESYS LOGIC, INC. When plugging it and then mounting the XFS fs on the drive, this is what i get: Sep 3 15:06:55 precious kernel: ieee1394: Node changed: 0-00:1023 -> 0-01:1023 Sep 3 15:06:55 precious kernel: ieee1394: Node resumed: ID:BUS[0-01:1023] GUID[0001a350000154d5] Sep 3 15:06:55 precious kernel: ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... Sep 3 15:06:55 precious kernel: ieee1394: Node changed: 0-01:1023 -> 0-00:1023 Sep 3 15:06:55 precious kernel: ieee1394: Node changed: 0-00:1023 -> 0-01:1023 Sep 3 15:06:55 precious kernel: scsi3 : SCSI emulation for IEEE-1394 SBP-2 Devices Sep 3 15:06:56 precious kernel: ieee1394: sbp2: Logged into SBP-2 device Sep 3 15:06:56 precious kernel: ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Sep 3 15:06:57 precious kernel: Vendor: Maxtor 6 Model: Y080P0 Rev: 0.01 Sep 3 15:06:57 precious kernel: Type: Direct-Access ANSI SCSI revision: 02 Sep 3 15:06:57 precious kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) Sep 3 15:06:57 precious kernel: sda: got wrong page Sep 3 15:06:57 precious kernel: sda: assuming drive cache: write through Sep 3 15:06:57 precious kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) Sep 3 15:06:57 precious kernel: sda: got wrong page Sep 3 15:06:57 precious kernel: sda: assuming drive cache: write through Sep 3 15:07:01 precious kernel: sda: sda1 Sep 3 15:07:01 precious kernel: Attached scsi disk sda at scsi3, channel 0, id 0, lun 0 Sep 3 15:07:01 precious scsi.agent[30675]: sd_mod: loaded successfully (for disk) Sep 3 15:13:31 precious kernel: XFS mounting filesystem sda <insert pause here> Sep 3 15:14:01 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:14:01 precious kernel: command: cdb[0]=0x2a: 2a 00 04 c5 41 04 00 00 f8 00 Sep 3 15:14:01 precious kernel: Ending clean XFS mount for filesystem: sda1 at this point, I initiated a # dd if=/dev/zero of=testfile bs=1024 count=1024000 after a while, this starts happening: Sep 3 15:20:10 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:10 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:10 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 3f c7 00 00 f8 00 Sep 3 15:20:10 precious kernel: Filesystem "sda1": XFS internal error xfs_btree_check_sblock at line 352 of file fs/xfs/xfs_btree.c. Caller 0xc01c64ee Sep 3 15:20:10 precious kernel: [xfs_btree_check_sblock+109/256] xfs_btree_check_sblock+0x6d/0x100 Sep 3 15:20:10 precious kernel: [xfs_alloc_lookup+782/1120] xfs_alloc_lookup+0x30e/0x460 Sep 3 15:20:10 precious kernel: [xfs_alloc_lookup+782/1120] xfs_alloc_lookup+0x30e/0x460 Sep 3 15:20:10 precious kernel: [xfs_alloc_fixup_trees+452/1024] xfs_alloc_fixup_trees+0x1c4/0x400 Sep 3 15:20:10 precious kernel: [xfs_btree_init_cursor+57/448] xfs_btree_init_cursor+0x39/0x1c0 Sep 3 15:20:10 precious kernel: [xfs_alloc_ag_vextent_size+1066/1296] xfs_alloc_ag_vextent_size+0x42a/0x510 Sep 3 15:20:10 precious kernel: [xfs_alloc_ag_vextent+264/272] xfs_alloc_ag_vextent+0x108/0x110 Sep 3 15:20:10 precious kernel: [xfs_alloc_vextent+536/1200] xfs_alloc_vextent+0x218/0x4b0 Sep 3 15:20:10 precious kernel: ritepage+0x74/0x120 Sep 3 15:20:10 precious kernel: [linvfs_writepage+0/288] linvfs_writepage+0x0/0x120 Sep 3 15:20:10 precious kernel: [mpage_writepages+567/1072] mpage_writepages+0x237/0x430 Sep 3 15:20:10 precious kernel: [linvfs_writepage+0/288] linvfs_writepage+0x0/0x120 Sep 3 15:20:10 precious kernel: [do_writepages+55/64] do_writepages+0x37/0x40 Sep 3 15:20:10 precious kernel: [__sync_single_inode+134/624] __sync_single_inode+0x86/0x270 Sep 3 15:20:10 precious kernel: [__writeback_single_inode+63/336] __writeback_single_inode+0x3f/0x150 Sep 3 15:20:10 precious kernel: [schedule_timeout+89/192] schedule_timeout+0x59/0xc0 Sep 3 15:20:10 precious kernel: [sync_sb_inodes+479/736] sync_sb_inodes+0x1df/0x2e0 Sep 3 15:20:10 precious kernel: [writeback_inodes+107/304] writeback_inodes+0x6b/0x130 Sep 3 15:20:10 precious kernel: [background_writeout+152/224] background_writeout+0x98/0xe0 Sep 3 15:20:10 precious kernel: [__pdflush+229/464] __pdflush+0xe5/0x1d0 Sep 3 15:20:10 precious kernel: [pdflush+0/48] pdflush+0x0/0x30 Sep 3 15:20:10 precious kernel: [pdflush+38/48] pdflush+0x26/0x30 Sep 3 15:20:10 precious kernel: [background_writeout+0/224] background_writeout+0x0/0xe0 Sep 3 15:20:10 precious kernel: [kthread+182/192] kthread+0xb6/0xc0 Sep 3 15:20:10 precious kernel: [kthread+0/192] kthread+0x0/0xc0 Sep 3 15:20:10 precious kernel: [kernel_thread_helper+5/12] kernel_thread_helper+0x5/0xc and so on and on Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 49 77 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4a 6f 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4b 67 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4c 5f 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4d 57 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4e 4f 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command Sep 3 15:20:40 precious kernel: scsi3 : destination target 0, lun 0 Sep 3 15:20:40 precious kernel: command: cdb[0]=0x2a: 2a 00 00 36 4f 47 00 00 f8 00 Sep 3 15:20:40 precious kernel: ieee1394: sbp2: aborting sbp2 command at which point i killed the dd and removed the device from the bus. Using the sbp2 module with serialize_io=1 fixes the problem, but it's also quite slow. Is there anything else I can try? I'd love to have the full 400mb to my disposal... Thanks in advance, Jan -- Death has been proven to be 99% fatal in laboratory rats. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
