On Wed, 22 Jul 2015, Michael Schmitz wrote: > Hi Finn, > > I'm afraid I cannot test anything on Atari hardware at present - my > Falcon ate it's IDE disk partition table with all the fun that entails.
That doesn't sound good. > Haven't even begun to try and recover that yet. > > If you send a patch I could build a kernel and send that to Christian > for testing (if he's got his Falcon up and running - might be a tad warm > in the attic for that, in fact). Anyone with a suitable Atari, i.e. ATARIHW_PRESENT(TT_CLK), who can boot both TOS and Linux could resolve the question. (Perhaps with an emulator?) Any old kernel binary would do, since atari_scsi should print either "HOSTID=n" or "this_id n" at startup. If n doesn't agree with what TOS says about the host's SCSI ID, then I think a trivial patch is safe enough. Especially if cat /proc/driver/nvram produces a "SCSI host ID : m" that does agree with TOS. Regards, Finn > > Cheers, > > Michael > > > Am 14.07.15 um 20:17 schrieb Finn Thain: > > On Mon, 13 Jul 2015, Andreas Schwab wrote: > > > > > Finn Thain <fth...@telegraphics.com.au> writes: > > > > > > > BTW, I didn't change the SCSI ID location in NVRAM. This code says 16 > > > > whereas atari_scsi says 14. Which one is correct? > > > I think atari_scsi is wrong. The best source I could find > > > (http://www.gratifiant.com/nvram-falcon-t561185) places it after the > > > video mode byte, thus at byte 16. > > Thanks for that. BTW, I googled a phrase from that page and found this one > > http://toshyp.atari.org/en/004009.html > > which may be closer to the source. > > > > I'll send a patch if someone can offer to test such a change to atari_scsi > > (or merely confirm that the SCSI ID setting in TOS does not match this_id > > given in dmesg). > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
