cpqfcTSinit has a static array of PCI device and vendor ids supported by the
driver. Sounds familiar, doesn't it? Use pci_device_id as type for the
entries of this array and declare the array as MODULE_DEVICE_TABLE. Also use
pci_get_device() instead of pci_find_device() and remove some superfluos
defines for device scanning.
Signed-off-by: Rolf Eike Beer <[EMAIL PROTECTED]>
--- a/drivers/scsi/cpqfcTSstructs.h 2005-08-14 10:56:41.000000000 +0200
+++ b/drivers/scsi/cpqfcTSstructs.h 2005-08-14 10:57:32.000000000 +0200
@@ -95,12 +95,6 @@
#define DEV_NAME "cpqfcTS"
-struct SupportedPCIcards
-{
- __u16 vendor_id;
- __u16 device_id;
-};
-
// nn:nn denotes bit field
// TachyonHeader struct def.
// the fields shared with ODB
--- a/drivers/scsi/cpqfcTSinit.c 2005-08-14 14:20:40.000000000 +0200
+++ b/drivers/scsi/cpqfcTSinit.c 2005-08-14 14:25:33.000000000 +0200
@@ -264,18 +264,14 @@ static void launch_FCworker_thread(struc
* Agilent XL2
* HP Tachyon
*/
-#define HBA_TYPES 3
-
-#ifndef PCI_DEVICE_ID_COMPAQ_
-#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc
-#endif
-
-static struct SupportedPCIcards cpqfc_boards[] __initdata = {
- {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TACHYON},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHLITE},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHYON},
+static struct pci_device_id cpqfc_boards[] __initdata = {
+ {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TACHYON, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHLITE, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_TACHYON, PCI_ANY_ID, PCI_ANY_ID, 0,
0, 0},
+ {0, }
};
+MODULE_DEVICE_TABLE(pci, cpqfc_boards);
int cpqfcTS_detect(Scsi_Host_Template *ScsiHostTemplate)
{
@@ -294,14 +290,9 @@ int cpqfcTS_detect(Scsi_Host_Template *S
ScsiHostTemplate->proc_name = "cpqfcTS";
#endif
- for( i=0; i < HBA_TYPES; i++)
- {
- // look for all HBAs of each type
-
- while((PciDev = pci_find_device(cpqfc_boards[i].vendor_id,
- cpqfc_boards[i].device_id, PciDev)))
- {
-
+ for(i = 0; cpqfc_boards[i]; i++) {
+ while((PciDev = pci_get_device(cpqfc_boards[i].vendor,
+ cpqfc_boards[i].device, PciDev))) {
if (pci_enable_device(PciDev)) {
printk(KERN_ERR
"cpqfc: can't enable PCI device at %s\n", pci_name(PciDev));
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
