Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
Cc: Thomas Gleixner <t...@linutronix.de>
Signed-off-by: Vineet Gupta <vgu...@synopsys.com>
---
arch/arc/Kconfig | 5 +++++
arch/arc/kernel/setup.c | 9 +++++++--
arch/arc/kernel/time.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 974ed9058018..f09e03a0d604 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -372,6 +372,11 @@ config ARC_HAS_LL64
dest operands with 2 possible source operands.
default y
+config ARC_HAS_RTC
+ bool "Local 64-bit r/o cycle counter"
+ default n
+ depends on !SMP
+
config ARC_NUMBER_OF_INTERRUPTS
int "Number of interrupts"
range 8 240
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index ca71cef4bafd..a3d186211ed3 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -200,9 +200,11 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int
len)
(unsigned int)(arc_get_core_freq() / 1000000),
(unsigned int)(arc_get_core_freq() / 10000) % 100);
- n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s\nISA Extn\t: ",
+ n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->timers.t0, "Timer0 "),
- IS_AVAIL1(cpu->timers.t1, "Timer1 "));
+ IS_AVAIL1(cpu->timers.t1, "Timer1 "),
+ IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
+ CONFIG_ARC_HAS_RTC));
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
@@ -290,6 +292,9 @@ static void arc_chk_core_config(void)
if (!cpu->timers.t1)
panic("Timer1 is not present!\n");
+ if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
+ panic("RTC is not present\n");
+
#ifdef CONFIG_ARC_HAS_DCCM
/*
* DCCM can be arbit placed in hardware.
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 71493f75ae6b..da495478a40b 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -60,6 +60,54 @@
/********** Clock Source Device *********/
+#ifdef CONFIG_ARC_HAS_RTC
+
+#define AUX_RTC_CTRL 0x103
+#define AUX_RTC_LOW 0x104
+#define AUX_RTC_HIGH 0x105
+
+int arc_counter_setup(void)
+{
+ write_aux_reg(AUX_RTC_CTRL, 1);
+
+ /* Not usable in SMP */
+ return !IS_ENABLED(CONFIG_SMP);
+}
+
+static cycle_t arc_counter_read(struct clocksource *cs)
+{
+ unsigned long status;
+ union {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ struct { u32 high, low; };
+#else
+ struct { u32 low, high; };
+#endif
+ cycle_t full;
+ } stamp;
+
+
+ __asm__ __volatile(
+ "1: \n"
+ " lr %0, [AUX_RTC_LOW] \n"
+ " lr %1, [AUX_RTC_HIGH] \n"
+ " lr %2, [AUX_RTC_CTRL] \n"
+ " bbit0.nt %2, 31, 1b \n"
+ : "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+
+ return stamp.full;
+}
+
+static struct clocksource arc_counter = {
+ .name = "ARCv2 RTC",
+ .rating = 350,
+ .read = arc_counter_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#else /* !CONFIG_ARC_HAS_RTC */
+
/*
* set 32bit TIMER1 to keep counting monotonically and wraparound
*/
@@ -86,6 +134,8 @@ static struct clocksource arc_counter = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+#endif
+
/********** Clock Event Device *********/
/*
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
