[PATCH RFC 3/3] clk: imx28: add DC-DC clock domain

[Stefan Wahren]

This patch adds the DC-DC clock domain into the i.MX28 clock driver.
That enables consumers to change DC-DC clock frequency in order to
avoid interferences without changing hardware.

Signed-off-by: Stefan Wahren <stefan.wah...@i2se.com>
---
 drivers/clk/mxs/clk-imx28.c |   33 ++++++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c
index a6c3501..de2c347 100644
--- a/drivers/clk/mxs/clk-imx28.c
+++ b/drivers/clk/mxs/clk-imx28.c
@@ -60,6 +60,18 @@ static void __iomem *digctrl;
 #define DIGCTRL digctrl
 #define BP_SAIF_CLKMUX         10
 
+static void __iomem *powerctrl;
+#define POWERCTRL powerctrl
+#define POWER_MISC             (POWERCTRL + 0x0090)
+
+static const struct clk_div_table dcdc_div_table[] = {
+       { .val = 0, .div = 16 },
+       { .val = 1, .div = 24 },
+       { .val = 2, .div = 20 },
+       { .val = 3, .div = 25 },
+       { /* sentinel */ },
+};
+
 /*
  * HW_SAIF_CLKMUX_SEL:
  *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
@@ -134,6 +146,8 @@ static const char *sel_pll0[] __initconst = { "pll0", 
"ref_xtal", };
 static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", };
 static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", };
 static const char *ptp_sels[] __initconst = { "ref_xtal", "pll0", };
+static const char *dcdc_plls[] __initconst = { "pll0", "ref_gpmi", };
+static const char *dcdc_sels[] __initconst = { "ref_xtal", "dcdc_div", };
 
 enum imx28_clk {
        ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1,
@@ -145,7 +159,8 @@ enum imx28_clk {
        clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0,
        ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm,
        fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out,
-       clk_max
+       dcdc_pll, dcdc_div, dcdc_sel,
+       clk_max,
 };
 
 static struct clk *clks[clk_max];
@@ -157,13 +172,18 @@ static enum imx28_clk clks_init_on[] __initdata = {
 
 static void __init mx28_clocks_init(struct device_node *np)
 {
-       struct device_node *dcnp;
+       struct device_node *tnp;
        u32 i;
 
-       dcnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
-       digctrl = of_iomap(dcnp, 0);
+       tnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+       digctrl = of_iomap(tnp, 0);
        WARN_ON(!digctrl);
-       of_node_put(dcnp);
+       of_node_put(tnp);
+
+       tnp = of_find_compatible_node(NULL, NULL, "fsl,imx28-power");
+       powerctrl = of_iomap(tnp, 0);
+       WARN_ON(!powerctrl);
+       of_node_put(tnp);
 
        clkctrl = of_iomap(np, 0);
        WARN_ON(!clkctrl);
@@ -235,6 +255,9 @@ static void __init mx28_clocks_init(struct device_node *np)
        clks[usb0_phy] = clk_register_gate(NULL, "usb0_phy", "pll0", 0, 
PLL0CTRL0, 18, 0, &mxs_lock);
        clks[usb1_phy] = clk_register_gate(NULL, "usb1_phy", "pll1", 0, 
PLL1CTRL0, 18, 0, &mxs_lock);
        clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 
18, 0, &mxs_lock);
+       clks[dcdc_pll] = mxs_clk_mux("dcdc_pll", POWER_MISC, 6, 1, dcdc_plls, 
ARRAY_SIZE(dcdc_plls));
+       clks[dcdc_div] = clk_register_divider_table(NULL, "dcdc_div", 
"dcdc_pll", 0, POWER_MISC, 4, 2, 0, dcdc_div_table, &mxs_lock);
+       clks[dcdc_sel] = mxs_clk_mux("dcdc_sel", POWER_MISC, 0, 1, dcdc_sels, 
ARRAY_SIZE(dcdc_sels));
 
        for (i = 0; i < ARRAY_SIZE(clks); i++)
                if (IS_ERR(clks[i])) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/