Em Wed, 08 Apr 2015 13:56:14 +0000
Sifan Naeem <sifan.na...@imgtec.com> escreveu:

> Hi Mauro,
> 
> I sent you a v2 of this patch on 4th February:
> 
> From: Sifan Naeem 
> Sent: 04 February 2015 16:48
> To: James Hogan; mche...@osg.samsung.com
> Cc: linux-kernel@vger.kernel.org; linux-me...@vger.kernel.org; Sifan Naeem
> Subject: [PATCH v2] rc: img-ir: Add and enable sys clock for img-ir
> 
> 
> Unfortunately, while trying to improve the commit message in v2 I had changed 
> the last word of the patch name from IR to img-ir.
> 
> Do you want me to do a diff between the 2 patches and send you a new patch?

Yes, please do that, changing the patch name/description to reflect
what changed since v1.

Regards,
Mauro

> 
> Sifan
> 
> > -----Original Message-----
> > From: Mauro Carvalho Chehab [mailto:mche...@osg.samsung.com]
> > Sent: 08 April 2015 12:32
> > To: Sifan Naeem
> > Cc: James Hogan; linux-kernel@vger.kernel.org; linux-
> > me...@vger.kernel.org
> > Subject: Re: [PATCH] rc: img-ir: Add and enable sys clock for IR
> > 
> > Em Tue, 3 Feb 2015 17:30:29 +0000
> > Sifan Naeem <sifan.na...@imgtec.com> escreveu:
> > 
> > > Gets a handle to the system clock, already described in the binding
> > > document, and calls the appropriate common clock framework functions
> > > to mark it prepared/enabled, the common clock framework initially
> > > enables the clock and doesn't disable it at least until the
> > > device/driver is removed.
> > > The system clock to IR is needed for the driver to communicate with
> > > the IR hardware via MMIO accesses on the system bus, so it must not be
> > > disabled during use or the driver will malfunction.
> > 
> > Hmm... patchwork has two versions of this patch, but I have only one on my
> > e-mail.
> > 
> > Could you please check if I applied the right one? If not, please send me an
> > email with a fixup patch.
> > 
> > Thanks!
> > Mauro
> > 
> > >
> > > Signed-off-by: Sifan Naeem <sifan.na...@imgtec.com>
> > > ---
> > >  drivers/media/rc/img-ir/img-ir-core.c |   13 +++++++++----
> > >  drivers/media/rc/img-ir/img-ir.h      |    2 ++
> > >  2 files changed, 11 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/media/rc/img-ir/img-ir-core.c
> > > b/drivers/media/rc/img-ir/img-ir-core.c
> > > index 77c78de..783dd21 100644
> > > --- a/drivers/media/rc/img-ir/img-ir-core.c
> > > +++ b/drivers/media/rc/img-ir/img-ir-core.c
> > > @@ -60,6 +60,8 @@ static void img_ir_setup(struct img_ir_priv *priv)
> > >
> > >   if (!IS_ERR(priv->clk))
> > >           clk_prepare_enable(priv->clk);
> > > + if (!IS_ERR(priv->sys_clk))
> > > +         clk_prepare_enable(priv->sys_clk);
> > >  }
> > >
> > >  static void img_ir_ident(struct img_ir_priv *priv) @@ -110,10 +112,11
> > > @@ static int img_ir_probe(struct platform_device *pdev)
> > >   priv->clk = devm_clk_get(&pdev->dev, "core");
> > >   if (IS_ERR(priv->clk))
> > >           dev_warn(&pdev->dev, "cannot get core clock resource\n");
> > > - /*
> > > -  * The driver doesn't need to know about the system ("sys") or
> > power
> > > -  * modulation ("mod") clocks yet
> > > -  */
> > > +
> > > + /* Get sys clock */
> > > + priv->sys_clk = devm_clk_get(&pdev->dev, "sys");
> > > + if (IS_ERR(priv->sys_clk))
> > > +         dev_warn(&pdev->dev, "cannot get sys clock resource\n");
> > >
> > >   /* Set up raw & hw decoder */
> > >   error = img_ir_probe_raw(priv);
> > > @@ -152,6 +155,8 @@ static int img_ir_remove(struct platform_device
> > > *pdev)
> > >
> > >   if (!IS_ERR(priv->clk))
> > >           clk_disable_unprepare(priv->clk);
> > > + if (!IS_ERR(priv->sys_clk))
> > > +         clk_disable_unprepare(priv->sys_clk);
> > >   return 0;
> > >  }
> > >
> > > diff --git a/drivers/media/rc/img-ir/img-ir.h
> > > b/drivers/media/rc/img-ir/img-ir.h
> > > index 2ddf560..f1387c0 100644
> > > --- a/drivers/media/rc/img-ir/img-ir.h
> > > +++ b/drivers/media/rc/img-ir/img-ir.h
> > > @@ -138,6 +138,7 @@ struct clk;
> > >   * @dev:         Platform device.
> > >   * @irq:         IRQ number.
> > >   * @clk:         Input clock.
> > > + * @sys_clk:             System clock.
> > >   * @reg_base:            Iomem base address of IR register block.
> > >   * @lock:                Protects IR registers and variables in this 
> > > struct.
> > >   * @raw:         Driver data for raw decoder.
> > > @@ -147,6 +148,7 @@ struct img_ir_priv {
> > >   struct device           *dev;
> > >   int                     irq;
> > >   struct clk              *clk;
> > > + struct clk              *sys_clk;
> > >   void __iomem            *reg_base;
> > >   spinlock_t              lock;
> > >
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to