The Broadcom MSPI controller is used on various SoCs. It is being
renamed so that it can be extended and reused on other chips. It is
renamed to bcm-mspi.
Signed-off-by: Jonathan Richardson <jonat...@broadcom.com>
---
drivers/spi/Kconfig | 7 +-
drivers/spi/Makefile | 2 +-
drivers/spi/spi-bcm-mspi.c | 307 ++++++++++++++++++++++++++++++++++++++++++++
drivers/spi/spi-bcm-mspi.h | 84 ++++++++++++
drivers/spi/spi-bcm53xx.c | 299 ------------------------------------------
drivers/spi/spi-bcm53xx.h | 72 -----------
6 files changed, 395 insertions(+), 376 deletions(-)
create mode 100644 drivers/spi/spi-bcm-mspi.c
create mode 100644 drivers/spi/spi-bcm-mspi.h
delete mode 100644 drivers/spi/spi-bcm53xx.c
delete mode 100644 drivers/spi/spi-bcm53xx.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ab8dfbe..766e08d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -113,13 +113,12 @@ config SPI_AU1550
If you say yes to this option, support will be included for the
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
-config SPI_BCM53XX
- tristate "Broadcom BCM53xx SPI controller"
- depends on ARCH_BCM_5301X
+config SPI_BCMA_MSPI
+ tristate "Broadcom BCMA MSPI controller"
depends on BCMA_POSSIBLE
select BCMA
help
- Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
+ Enable support for the Broadcom BCMA MSPI controller.
config SPI_BCM63XX
tristate "Broadcom BCM63xx SPI controller"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d8cbf65..6b58100 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
-obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
+obj-$(CONFIG_SPI_BCMA_MSPI) += spi-bcm-mspi.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
diff --git a/drivers/spi/spi-bcm-mspi.c b/drivers/spi/spi-bcm-mspi.c
new file mode 100644
index 0000000..67ea246
--- /dev/null
+++ b/drivers/spi/spi-bcm-mspi.c
@@ -0,0 +1,307 @@
+/*
+ * Portions Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bcma/bcma.h>
+#include <linux/spi/spi.h>
+
+#include "spi-bcm-mspi.h"
+
+#define BCM_MSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
+
+/* The longest observed required wait was 19 ms */
+#define BCM_MSPI_SPE_TIMEOUT_MS 80
+
+struct bcm_mspi {
+ struct bcma_device *core;
+ struct spi_master *master;
+
+ size_t read_offset;
+};
+
+static inline u32 bcm_mspi_read(struct bcm_mspi *mspi, u16 offset)
+{
+ return bcma_read32(mspi->core, offset);
+}
+
+static inline void bcm_mspi_write(struct bcm_mspi *mspi, u16 offset,
+ u32 value)
+{
+ bcma_write32(mspi->core, offset, value);
+}
+
+static inline unsigned int bcm_mspi_calc_timeout(size_t len)
+{
+ /* Do some magic calculation based on length and buad. Add 10% and 1. */
+ return (len * 9000 / BCM_MSPI_MAX_SPI_BAUD * 110 / 100) + 1;
+}
+
+static int bcm_mspi_wait(struct bcm_mspi *mspi, unsigned int timeout_ms)
+{
+ unsigned long deadline;
+ u32 tmp;
+
+ /* SPE bit has to be 0 before we read MSPI STATUS */
+ deadline = jiffies + BCM_MSPI_SPE_TIMEOUT_MS * HZ / 1000;
+ do {
+ tmp = bcm_mspi_read(mspi, MSPI_SPCR2);
+ if (!(tmp & MSPI_SPCR2_SPE))
+ break;
+ udelay(5);
+ } while (!time_after_eq(jiffies, deadline));
+
+ if (tmp & MSPI_SPCR2_SPE)
+ goto spi_timeout;
+
+ /* Check status */
+ deadline = jiffies + timeout_ms * HZ / 1000;
+ do {
+ tmp = bcm_mspi_read(mspi, MSPI_MSPI_STATUS);
+ if (tmp & MSPI_MSPI_STATUS_SPIF) {
+ bcm_mspi_write(mspi, MSPI_MSPI_STATUS, 0);
+ return 0;
+ }
+
+ cpu_relax();
+ udelay(100);
+ } while (!time_after_eq(jiffies, deadline));
+
+spi_timeout:
+ bcm_mspi_write(mspi, MSPI_MSPI_STATUS, 0);
+
+ pr_err("Timeout waiting for SPI to be ready!\n");
+
+ return -EBUSY;
+}
+
+static void bcm_mspi_buf_write(struct bcm_mspi *mspi, u8 *w_buf,
+ size_t len, bool cont)
+{
+ u32 tmp;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ /* Transmit Register File MSB */
+ bcm_mspi_write(mspi, MSPI_TXRAM + 4 * (i * 2),
+ (unsigned int)w_buf[i]);
+ }
+
+ for (i = 0; i < len; i++) {
+ tmp = CDRAM_CONT | CDRAM_PCS_DISABLE_ALL | CDRAM_PCS_DSCK;
+ if (!cont && i == len - 1)
+ tmp &= ~CDRAM_CONT;
+ tmp &= ~0x1;
+ /* Command Register File */
+ bcm_mspi_write(mspi, MSPI_CDRAM + 4 * i, tmp);
+ }
+
+ /* Set queue pointers */
+ bcm_mspi_write(mspi, MSPI_NEWQP, 0);
+ bcm_mspi_write(mspi, MSPI_ENDQP, len - 1);
+
+ if (cont)
+ bcm_mspi_write(mspi, MSPI_WRITE_LOCK, 1);
+
+ /* Start SPI transfer */
+ tmp = bcm_mspi_read(mspi, MSPI_SPCR2);
+ tmp |= MSPI_SPCR2_SPE;
+ if (cont)
+ tmp |= MSPI_SPCR2_CONT_AFTER_CMD;
+ bcm_mspi_write(mspi, MSPI_SPCR2, tmp);
+
+ /* Wait for SPI to finish */
+ bcm_mspi_wait(mspi, bcm_mspi_calc_timeout(len));
+
+ if (!cont)
+ bcm_mspi_write(mspi, MSPI_WRITE_LOCK, 0);
+
+ mspi->read_offset = len;
+}
+
+static void bcm_mspi_buf_read(struct bcm_mspi *mspi, u8 *r_buf,
+ size_t len, bool cont)
+{
+ u32 tmp;
+ int i;
+
+ for (i = 0; i < mspi->read_offset + len; i++) {
+ tmp = CDRAM_CONT | CDRAM_PCS_DISABLE_ALL |
+ CDRAM_PCS_DSCK;
+ if (!cont && i == mspi->read_offset + len - 1)
+ tmp &= ~CDRAM_CONT;
+ tmp &= ~0x1;
+ /* Command Register File */
+ bcm_mspi_write(mspi, MSPI_CDRAM + 4 * i, tmp);
+ }
+
+ /* Set queue pointers */
+ bcm_mspi_write(mspi, MSPI_NEWQP, 0);
+ bcm_mspi_write(mspi, MSPI_ENDQP,
+ mspi->read_offset + len - 1);
+
+ if (cont)
+ bcm_mspi_write(mspi, MSPI_WRITE_LOCK, 1);
+
+ /* Start SPI transfer */
+ tmp = bcm_mspi_read(mspi, MSPI_SPCR2);
+ tmp |= MSPI_SPCR2_SPE;
+ if (cont)
+ tmp |= MSPI_SPCR2_CONT_AFTER_CMD;
+ bcm_mspi_write(mspi, MSPI_SPCR2, tmp);
+
+ /* Wait for SPI to finish */
+ bcm_mspi_wait(mspi, bcm_mspi_calc_timeout(len));
+
+ if (!cont)
+ bcm_mspi_write(mspi, MSPI_WRITE_LOCK, 0);
+
+ for (i = 0; i < len; ++i) {
+ int offset = mspi->read_offset + i;
+
+ /* Data stored in the transmit register file LSB */
+ r_buf[i] = (u8)bcm_mspi_read(mspi,
+ MSPI_RXRAM + 4 * (1 + offset * 2));
+ }
+
+ mspi->read_offset = 0;
+}
+
+static int bcm_mspi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct bcm_mspi *mspi = spi_master_get_devdata(master);
+ u8 *buf;
+ size_t left;
+
+ if (t->tx_buf) {
+ buf = (u8 *)t->tx_buf;
+ left = t->len;
+ while (left) {
+ size_t to_write = min_t(size_t, 16, left);
+ bool cont = left - to_write > 0;
+
+ bcm_mspi_buf_write(mspi, buf, to_write, cont);
+ left -= to_write;
+ buf += to_write;
+ }
+ }
+
+ if (t->rx_buf) {
+ buf = (u8 *)t->rx_buf;
+ left = t->len;
+ while (left) {
+ size_t to_read = min_t(size_t, 16 - mspi->read_offset,
+ left);
+ bool cont = left - to_read > 0;
+
+ bcm_mspi_buf_read(mspi, buf, to_read, cont);
+ left -= to_read;
+ buf += to_read;
+ }
+ }
+
+ return 0;
+}
+
+static struct spi_board_info bcm53xx_info = {
+ .modalias = "bcm53xxspiflash",
+};
+
+static const struct bcma_device_id bcm_mspi_bcma_tbl[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV,
+ BCMA_ANY_CLASS),
+ {},
+};
+MODULE_DEVICE_TABLE(bcma, bcm_mspi_bcma_tbl);
+
+static inline u32 bcm_bcma_mspi_read(struct bcm_mspi *mspi, u16 offset)
+{
+ return bcma_read32(mspi->core, offset);
+}
+
+static inline void bcm_bcma_mspi_write(struct bcm_mspi *mspi, u16 offset,
+ u32 value)
+{
+ bcma_write32(mspi->core, offset, value);
+}
+
+static int bcm_mspi_bcma_probe(struct bcma_device *core)
+{
+ struct bcm_mspi *data;
+ struct spi_master *master;
+ int err;
+
+ dev_info(&core->dev, "BCM MSPI BCMA probe\n");
+
+ if (core->bus->drv_cc.core->id.rev != 42) {
+ pr_err("SPI on SoC with unsupported ChipCommon rev\n");
+ return -ENOTSUPP;
+ }
+
+ master = spi_alloc_master(&core->dev, sizeof(*data));
+ if (!master)
+ return -ENOMEM;
+
+ data = spi_master_get_devdata(master);
+ data->master = master;
+ data->core = core;
+
+ master->transfer_one = bcm_mspi_transfer_one;
+ bcma_set_drvdata(core, data);
+
+ err = devm_spi_register_master(&core->dev, data->master);
+ if (err) {
+ spi_master_put(master);
+ bcma_set_drvdata(core, NULL);
+ goto out;
+ }
+
+ /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
+ spi_new_device(master, &bcm53xx_info);
+
+out:
+ return err;
+}
+
+static struct bcma_driver bcm_mspi_bcma_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = bcm_mspi_bcma_tbl,
+ .probe = bcm_mspi_bcma_probe,
+};
+
+static int __init bcm_mspi_bcma_module_init(void)
+{
+ int err = 0;
+
+ err = bcma_driver_register(&bcm_mspi_bcma_driver);
+ if (err)
+ pr_err("Failed to register bcma driver: %d\n", err);
+
+ return err;
+}
+
+static void __exit bcm_mspi_bcma_module_exit(void)
+{
+ bcma_driver_unregister(&bcm_mspi_bcma_driver);
+}
+
+module_init(bcm_mspi_bcma_module_init);
+module_exit(bcm_mspi_bcma_module_exit);
+
+MODULE_DESCRIPTION("Broadcom MSPI SPI Controller driver");
+MODULE_AUTHOR("Rafał Miłecki <zaj...@gmail.com>");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-bcm-mspi.h b/drivers/spi/spi-bcm-mspi.h
new file mode 100644
index 0000000..d633d5b
--- /dev/null
+++ b/drivers/spi/spi-bcm-mspi.h
@@ -0,0 +1,84 @@
+/*
+ * Portions Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef SPI_BCM_MSPI_H
+#define SPI_BCM_MSPI_H
+
+#define BSPI_REVISION_ID 0x000
+#define BSPI_SCRATCH 0x004
+#define BSPI_MAST_N_BOOT_CTRL 0x008
+#define BSPI_BUSY_STATUS 0x00c
+#define BSPI_INTR_STATUS 0x010
+#define BSPI_B0_STATUS 0x014
+#define BSPI_B0_CTRL 0x018
+#define BSPI_B1_STATUS 0x01c
+#define BSPI_B1_CTRL 0x020
+#define BSPI_STRAP_OVERRIDE_CTRL 0x024
+#define BSPI_FLEX_MODE_ENABLE 0x028
+#define BSPI_BITS_PER_CYCLE 0x02c
+#define BSPI_BITS_PER_PHASE 0x030
+#define BSPI_CMD_AND_MODE_BYTE 0x034
+#define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
+#define BSPI_BSPI_XOR_VALUE 0x03c
+#define BSPI_BSPI_XOR_ENABLE 0x040
+#define BSPI_BSPI_PIO_MODE_ENABLE 0x044
+#define BSPI_BSPI_PIO_IODIR 0x048
+#define BSPI_BSPI_PIO_DATA 0x04c
+
+/* RAF */
+#define RAF_START_ADDR 0x100
+#define RAF_NUM_WORDS 0x104
+#define RAF_CTRL 0x108
+#define RAF_FULLNESS 0x10c
+#define RAF_WATERMARK 0x110
+#define RAF_STATUS 0x114
+#define RAF_READ_DATA 0x118
+#define RAF_WORD_CNT 0x11c
+#define RAF_CURR_ADDR 0x120
+
+/* MSPI */
+#define MSPI_SPCR0_LSB 0x200
+#define MSPI_SPCR0_MSB 0x204
+#define MSPI_SPCR1_LSB 0x208
+#define MSPI_SPCR1_MSB 0x20c
+#define MSPI_NEWQP 0x210
+#define MSPI_ENDQP 0x214
+#define MSPI_SPCR2 0x218
+#define MSPI_SPCR2_SPE 0x00000040
+#define MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
+#define MSPI_MSPI_STATUS 0x220
+#define MSPI_MSPI_STATUS_SPIF 0x00000001
+#define MSPI_CPTQP 0x224
+#define MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
+#define MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
+#define MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
+#define CDRAM_PCS_PCS0 0x00000001
+#define CDRAM_PCS_PCS1 0x00000002
+#define CDRAM_PCS_PCS2 0x00000004
+#define CDRAM_PCS_PCS3 0x00000008
+#define CDRAM_PCS_DISABLE_ALL 0x0000000f
+#define CDRAM_PCS_DSCK 0x00000010
+#define CDRAM_BITSE 0x00000040
+#define CDRAM_CONT 0x00000080
+#define MSPI_WRITE_LOCK 0x380
+#define MSPI_DISABLE_FLUSH_GEN 0x384
+
+/* Interrupt */
+#define INTR_RAF_LR_FULLNESS_REACHED 0x3a0
+#define INTR_RAF_LR_TRUNCATED 0x3a4
+#define INTR_RAF_LR_IMPATIENT 0x3a8
+#define INTR_RAF_LR_SESSION_DONE 0x3ac
+#define INTR_RAF_LR_OVERREAD 0x3b0
+#define INTR_MSPI_DONE 0x3b4
+#define INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
+
+#endif
diff --git a/drivers/spi/spi-bcm53xx.c b/drivers/spi/spi-bcm53xx.c
deleted file mode 100644
index 3fb91c8..0000000
--- a/drivers/spi/spi-bcm53xx.c
+++ /dev/null
@@ -1,299 +0,0 @@
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/bcma/bcma.h>
-#include <linux/spi/spi.h>
-
-#include "spi-bcm53xx.h"
-
-#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
-
-/* The longest observed required wait was 19 ms */
-#define BCM53XXSPI_SPE_TIMEOUT_MS 80
-
-struct bcm53xxspi {
- struct bcma_device *core;
- struct spi_master *master;
-
- size_t read_offset;
-};
-
-static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
-{
- return bcma_read32(b53spi->core, offset);
-}
-
-static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
- u32 value)
-{
- bcma_write32(b53spi->core, offset, value);
-}
-
-static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
-{
- /* Do some magic calculation based on length and buad. Add 10% and 1. */
- return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
-}
-
-static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
-{
- unsigned long deadline;
- u32 tmp;
-
- /* SPE bit has to be 0 before we read MSPI STATUS */
- deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
- do {
- tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
- if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
- break;
- udelay(5);
- } while (!time_after_eq(jiffies, deadline));
-
- if (tmp & B53SPI_MSPI_SPCR2_SPE)
- goto spi_timeout;
-
- /* Check status */
- deadline = jiffies + timeout_ms * HZ / 1000;
- do {
- tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
- if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
- bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
- return 0;
- }
-
- cpu_relax();
- udelay(100);
- } while (!time_after_eq(jiffies, deadline));
-
-spi_timeout:
- bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
-
- pr_err("Timeout waiting for SPI to be ready!\n");
-
- return -EBUSY;
-}
-
-static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
- size_t len, bool cont)
-{
- u32 tmp;
- int i;
-
- for (i = 0; i < len; i++) {
- /* Transmit Register File MSB */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
- (unsigned int)w_buf[i]);
- }
-
- for (i = 0; i < len; i++) {
- tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
- B53SPI_CDRAM_PCS_DSCK;
- if (!cont && i == len - 1)
- tmp &= ~B53SPI_CDRAM_CONT;
- tmp &= ~0x1;
- /* Command Register File */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
- }
-
- /* Set queue pointers */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-
- if (cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-
- /* Start SPI transfer */
- tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
- tmp |= B53SPI_MSPI_SPCR2_SPE;
- if (cont)
- tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
- bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-
- /* Wait for SPI to finish */
- bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-
- if (!cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
- b53spi->read_offset = len;
-}
-
-static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
- size_t len, bool cont)
-{
- u32 tmp;
- int i;
-
- for (i = 0; i < b53spi->read_offset + len; i++) {
- tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
- B53SPI_CDRAM_PCS_DSCK;
- if (!cont && i == b53spi->read_offset + len - 1)
- tmp &= ~B53SPI_CDRAM_CONT;
- tmp &= ~0x1;
- /* Command Register File */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
- }
-
- /* Set queue pointers */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
- b53spi->read_offset + len - 1);
-
- if (cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-
- /* Start SPI transfer */
- tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
- tmp |= B53SPI_MSPI_SPCR2_SPE;
- if (cont)
- tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
- bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
-
- /* Wait for SPI to finish */
- bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
-
- if (!cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
- for (i = 0; i < len; ++i) {
- int offset = b53spi->read_offset + i;
-
- /* Data stored in the transmit register file LSB */
- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 *
(1 + offset * 2));
- }
-
- b53spi->read_offset = 0;
-}
-
-static int bcm53xxspi_transfer_one(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
- u8 *buf;
- size_t left;
-
- if (t->tx_buf) {
- buf = (u8 *)t->tx_buf;
- left = t->len;
- while (left) {
- size_t to_write = min_t(size_t, 16, left);
- bool cont = left - to_write > 0;
-
- bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
- left -= to_write;
- buf += to_write;
- }
- }
-
- if (t->rx_buf) {
- buf = (u8 *)t->rx_buf;
- left = t->len;
- while (left) {
- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
- left);
- bool cont = left - to_read > 0;
-
- bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
- left -= to_read;
- buf += to_read;
- }
- }
-
- return 0;
-}
-
-/**************************************************
- * BCMA
- **************************************************/
-
-static struct spi_board_info bcm53xx_info = {
- .modalias = "bcm53xxspiflash",
-};
-
-static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV,
BCMA_ANY_CLASS),
- {},
-};
-MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
-
-static int bcm53xxspi_bcma_probe(struct bcma_device *core)
-{
- struct bcm53xxspi *b53spi;
- struct spi_master *master;
- int err;
-
- if (core->bus->drv_cc.core->id.rev != 42) {
- pr_err("SPI on SoC with unsupported ChipCommon rev\n");
- return -ENOTSUPP;
- }
-
- master = spi_alloc_master(&core->dev, sizeof(*b53spi));
- if (!master)
- return -ENOMEM;
-
- b53spi = spi_master_get_devdata(master);
- b53spi->master = master;
- b53spi->core = core;
-
- master->transfer_one = bcm53xxspi_transfer_one;
-
- bcma_set_drvdata(core, b53spi);
-
- err = devm_spi_register_master(&core->dev, master);
- if (err) {
- spi_master_put(master);
- bcma_set_drvdata(core, NULL);
- goto out;
- }
-
- /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
- spi_new_device(master, &bcm53xx_info);
-
-out:
- return err;
-}
-
-static void bcm53xxspi_bcma_remove(struct bcma_device *core)
-{
- struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
-
- spi_unregister_master(b53spi->master);
-}
-
-static struct bcma_driver bcm53xxspi_bcma_driver = {
- .name = KBUILD_MODNAME,
- .id_table = bcm53xxspi_bcma_tbl,
- .probe = bcm53xxspi_bcma_probe,
- .remove = bcm53xxspi_bcma_remove,
-};
-
-/**************************************************
- * Init & exit
- **************************************************/
-
-static int __init bcm53xxspi_module_init(void)
-{
- int err = 0;
-
- err = bcma_driver_register(&bcm53xxspi_bcma_driver);
- if (err)
- pr_err("Failed to register bcma driver: %d\n", err);
-
- return err;
-}
-
-static void __exit bcm53xxspi_module_exit(void)
-{
- bcma_driver_unregister(&bcm53xxspi_bcma_driver);
-}
-
-module_init(bcm53xxspi_module_init);
-module_exit(bcm53xxspi_module_exit);
-
-MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
-MODULE_AUTHOR("Rafał Miłecki <zaj...@gmail.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-bcm53xx.h b/drivers/spi/spi-bcm53xx.h
deleted file mode 100644
index 73575df..0000000
--- a/drivers/spi/spi-bcm53xx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef SPI_BCM53XX_H
-#define SPI_BCM53XX_H
-
-#define B53SPI_BSPI_REVISION_ID 0x000
-#define B53SPI_BSPI_SCRATCH 0x004
-#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
-#define B53SPI_BSPI_BUSY_STATUS 0x00c
-#define B53SPI_BSPI_INTR_STATUS 0x010
-#define B53SPI_BSPI_B0_STATUS 0x014
-#define B53SPI_BSPI_B0_CTRL 0x018
-#define B53SPI_BSPI_B1_STATUS 0x01c
-#define B53SPI_BSPI_B1_CTRL 0x020
-#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
-#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
-#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
-#define B53SPI_BSPI_BITS_PER_PHASE 0x030
-#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
-#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
-#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
-#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
-#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
-#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
-#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
-
-/* RAF */
-#define B53SPI_RAF_START_ADDR 0x100
-#define B53SPI_RAF_NUM_WORDS 0x104
-#define B53SPI_RAF_CTRL 0x108
-#define B53SPI_RAF_FULLNESS 0x10c
-#define B53SPI_RAF_WATERMARK 0x110
-#define B53SPI_RAF_STATUS 0x114
-#define B53SPI_RAF_READ_DATA 0x118
-#define B53SPI_RAF_WORD_CNT 0x11c
-#define B53SPI_RAF_CURR_ADDR 0x120
-
-/* MSPI */
-#define B53SPI_MSPI_SPCR0_LSB 0x200
-#define B53SPI_MSPI_SPCR0_MSB 0x204
-#define B53SPI_MSPI_SPCR1_LSB 0x208
-#define B53SPI_MSPI_SPCR1_MSB 0x20c
-#define B53SPI_MSPI_NEWQP 0x210
-#define B53SPI_MSPI_ENDQP 0x214
-#define B53SPI_MSPI_SPCR2 0x218
-#define B53SPI_MSPI_SPCR2_SPE 0x00000040
-#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
-#define B53SPI_MSPI_MSPI_STATUS 0x220
-#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
-#define B53SPI_MSPI_CPTQP 0x224
-#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to
0x2b8 */
-#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to
0x33c */
-#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to
0x37c */
-#define B53SPI_CDRAM_PCS_PCS0 0x00000001
-#define B53SPI_CDRAM_PCS_PCS1 0x00000002
-#define B53SPI_CDRAM_PCS_PCS2 0x00000004
-#define B53SPI_CDRAM_PCS_PCS3 0x00000008
-#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
-#define B53SPI_CDRAM_PCS_DSCK 0x00000010
-#define B53SPI_CDRAM_BITSE 0x00000040
-#define B53SPI_CDRAM_CONT 0x00000080
-#define B53SPI_MSPI_WRITE_LOCK 0x380
-#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
-
-/* Interrupt */
-#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
-#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
-#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
-#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
-#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
-#define B53SPI_INTR_MSPI_DONE 0x3b4
-#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
-
-#endif /* SPI_BCM53XX_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
