On Arndale Octa the S2MPS11 RTC alarm interrupt was not handled at all
because of wrong configuration of interrupt and gpx3-2.
1. Interrupt is signaled by falling edge.
2. This GPIO line is hard-wired on the board to PVDD_APIO_1V8 through a
resistor so pull-up/down must be disabled.
Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index d78fcd997ce6..97346df31d41 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -87,7 +87,9 @@
s2mps11,buck4-ramp-enable = <1>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
#clock-cells = <1>;
@@ -379,3 +381,12 @@
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
