On Fri, Mar 06, 2015 at 07:21:38PM +0100, Sébastien Szymanski wrote:
> Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
> ---
> drivers/input/touchscreen/Kconfig | 11 ++
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/sx8654.c | 285
> +++++++++++++++++++++++++++++++++++++
> 3 files changed, 297 insertions(+)
> create mode 100644 drivers/input/touchscreen/sx8654.c
>
> diff --git a/drivers/input/touchscreen/Kconfig
> b/drivers/input/touchscreen/Kconfig
> index 5891752..6f713fd0 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -961,6 +961,17 @@ config TOUCHSCREEN_SUR40
> To compile this driver as a module, choose M here: the
> module will be called sur40.
>
> +config TOUCHSCREEN_SX8654
> + tristate "Semtech SX8654 touchscreen"
> + depends on I2C && OF
Does it have to depend on OF? I do not see anything OF-specific there...
No need to resumbit.
> + help
> + Say Y here if you have a Semtech SX8654 touchscreen controller.
> +
> + If unsure, say N
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sx8654.
> +
> config TOUCHSCREEN_TPS6507X
> tristate "TPS6507x based touchscreens"
> depends on I2C
> diff --git a/drivers/input/touchscreen/Makefile
> b/drivers/input/touchscreen/Makefile
> index 0242fea..a06a752 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -79,5 +79,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) +=
> atmel-wm97xx.o
> obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
> obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
> obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
> +obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o
> obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
> obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
> diff --git a/drivers/input/touchscreen/sx8654.c
> b/drivers/input/touchscreen/sx8654.c
> new file mode 100644
> index 0000000..58cc478
> --- /dev/null
> +++ b/drivers/input/touchscreen/sx8654.c
> @@ -0,0 +1,285 @@
> +/*
> + * drivers/input/touchscreen/sx8654.c
> + *
> + * Copyright (c) 2015 Armadeus Systems
> + * Sébastien Szymanski <sebastien.szyman...@armadeus.com>
> + *
> + * Using code from:
> + * - sx865x.c
> + * Copyright (c) 2013 U-MoBo Srl
> + * Pierluigi Passaro <p.pass...@u-mobo.com>
> + * - sx8650.c
> + * Copyright (c) 2009 Wayne Roberts
> + * - tsc2007.c
> + * Copyright (c) 2008 Kwangwoo Lee
> + * - ads7846.c
> + * Copyright (c) 2005 David Brownell
> + * Copyright (c) 2006 Nokia Corporation
> + * - corgi_ts.c
> + * Copyright (C) 2004-2005 Richard Purdie
> + * - omap_ts.[hc], ads7846.h, ts_osk.c
> + * Copyright (C) 2002 MontaVista Software
> + * Copyright (C) 2004 Texas Instruments
> + * Copyright (C) 2005 Dirk Behme
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +
> +/* register addresses */
> +#define I2C_REG_TOUCH0 0x00
> +#define I2C_REG_TOUCH1 0x01
> +#define I2C_REG_CHANMASK 0x04
> +#define I2C_REG_IRQMASK 0x22
> +#define I2C_REG_IRQSRC 0x23
> +#define I2C_REG_SOFTRESET 0x3f
> +
> +/* commands */
> +#define CMD_READ_REGISTER 0x40
> +#define CMD_MANUAL 0xc0
> +#define CMD_PENTRG 0xe0
> +
> +/* value for I2C_REG_SOFTRESET */
> +#define SOFTRESET_VALUE 0xde
> +
> +/* bits for I2C_REG_IRQSRC */
> +#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08
> +#define IRQ_PENRELEASE 0x04
> +
> +/* bits for RegTouch1 */
> +#define CONDIRQ 0x20
> +#define FILT_7SA 0x03
> +
> +/* bits for I2C_REG_CHANMASK */
> +#define CONV_X 0x80
> +#define CONV_Y 0x40
> +
> +/* coordinates rate: higher nibble of CTRL0 register */
> +#define RATE_MANUAL 0x00
> +#define RATE_5000CPS 0xf0
> +
> +/* power delay: lower nibble of CTRL0 register */
> +#define POWDLY_1_1MS 0x0b
> +
> +#define MAX_12BIT ((1 << 12) - 1)
> +
> +struct sx8654 {
> + struct input_dev *input;
> + struct i2c_client *client;
> +};
> +
> +static irqreturn_t sx8654_irq(int irq, void *handle)
> +{
> + struct sx8654 *sx8654 = handle;
> + u8 irqsrc;
> + u8 data[4];
> + unsigned int x, y;
> + int retval;
> +
> + irqsrc = i2c_smbus_read_byte_data(sx8654->client,
> + (CMD_READ_REGISTER | I2C_REG_IRQSRC));
> + dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
> +
> + if (irqsrc < 0)
> + goto out;
> +
> + if (irqsrc & IRQ_PENRELEASE) {
> + dev_dbg(&sx8654->client->dev, "pen release interrupt");
> +
> + input_report_key(sx8654->input, BTN_TOUCH, 0);
> + input_sync(sx8654->input);
> + }
> +
> + if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
> + dev_dbg(&sx8654->client->dev, "pen touch interrupt");
> +
> + retval = i2c_master_recv(sx8654->client, data, sizeof(data));
> + if (retval != sizeof(data))
> + goto out;
> +
> + /* invalid data */
> + if (unlikely(data[0] & 0x80 || data[2] & 0x80))
> + goto out;
> +
> + x = ((data[0] & 0xf) << 8) | (data[1]);
> + y = ((data[2] & 0xf) << 8) | (data[3]);
> +
> + input_report_abs(sx8654->input, ABS_X, x);
> + input_report_abs(sx8654->input, ABS_Y, y);
> + input_report_key(sx8654->input, BTN_TOUCH, 1);
> + input_sync(sx8654->input);
> +
> + dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
> + }
> +
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int sx8654_open(struct input_dev *dev)
> +{
> + struct sx8654 *sx8654 = input_get_drvdata(dev);
> + struct i2c_client *client = sx8654->client;
> + int error;
> +
> + /* enable pen trigger mode */
> + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
> + (RATE_5000CPS | POWDLY_1_1MS));
> + if (error < 0) {
> + dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> + return -EIO;
> + }
> +
> + error = i2c_smbus_write_byte(client, CMD_PENTRG);
> + if (error < 0) {
> + dev_err(&client->dev, "writing command CMD_PENTRG failed");
> + return -EIO;
> + }
> +
> + enable_irq(client->irq);
> +
> + return 0;
> +}
> +
> +static void sx8654_close(struct input_dev *dev)
> +{
> + struct sx8654 *sx8654 = input_get_drvdata(dev);
> + struct i2c_client *client = sx8654->client;
> + int error;
> +
> + disable_irq(client->irq);
> +
> + /* enable manual mode mode */
> + error = i2c_smbus_write_byte(client, CMD_MANUAL);
> + if (error < 0) {
> + dev_err(&client->dev, "writing command CMD_MANUAL failed");
> + return;
> + }
> +
> + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
> + if (error < 0) {
> + dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
> + return;
> + }
> +}
> +
> +static int sx8654_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct sx8654 *sx8654;
> + struct input_dev *input;
> + int error;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_WORD_DATA))
> + return -ENXIO;
> +
> + sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
> + if (!sx8654)
> + return -ENOMEM;
> +
> + input = devm_input_allocate_device(&client->dev);
> + if (!sx8654)
> + return -ENOMEM;
> +
> + input->name = "SX8654 I2C Touchscreen";
> + input->id.bustype = BUS_I2C;
> + input->dev.parent = &client->dev;
> + input->open = sx8654_open;
> + input->close = sx8654_close;
> +
> + __set_bit(INPUT_PROP_DIRECT, input->propbit);
> + input_set_capability(input, EV_KEY, BTN_TOUCH);
> + input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
> + input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
> +
> + sx8654->client = client;
> + sx8654->input = input;
> +
> + input_set_drvdata(sx8654->input, sx8654);
> +
> + error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
> + SOFTRESET_VALUE);
> + if (error < 0) {
> + dev_err(&client->dev, "writing softreset value failed");
> + return -EIO;
> + }
> +
> + error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
> + (CONV_X | CONV_Y));
> + if (error < 0) {
> + dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
> + return -EIO;
> + }
> +
> + error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
> + (IRQ_PENTOUCH_TOUCHCONVDONE |
> + IRQ_PENRELEASE));
> + if (error < 0) {
> + dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
> + return -EIO;
> + }
> +
> + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
> + (CONDIRQ | FILT_7SA));
> + if (error < 0) {
> + dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
> + return -EIO;
> + }
> +
> + error = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, sx8654_irq,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + client->name, sx8654);
> + if (error) {
> + dev_err(&client->dev,
> + "Failed to enable IRQ %d, error: %d\n",
> + client->irq, error);
> + return error;
> + }
> +
> + /* Disable the IRQ, we'll enable it in sx8654_open() */
> + disable_irq(client->irq);
> +
> + error = input_register_device(sx8654->input);
> + if (error)
> + return error;
> +
> + i2c_set_clientdata(client, sx8654);
> + return 0;
> +}
> +
> +static const struct of_device_id sx8654_of_match[] = {
> + { .compatible = "semtech,sx8654", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, sx8654_of_match);
> +
> +static const struct i2c_device_id sx8654_id_table[] = {
> + { "semtech_sx8654", 0 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
> +
> +static struct i2c_driver sx8654_driver = {
> + .driver = {
> + .name = "sx8654",
> + .of_match_table = sx8654_of_match,
> + },
> +
> + .id_table = sx8654_id_table,
> + .probe = sx8654_probe,
> +};
> +module_i2c_driver(sx8654_driver);
> +
> +MODULE_AUTHOR("Sébastien Szymanski <sebastien.szyman...@armadeus.com>");
> +MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.0.5
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
