RTL8168F rev.B does not have to set following two ephy parameters. { 0x06, 0x00c0, 0x0020 } { 0x08, 0x0001, 0x0002 }
Add function rtl_hw_start_8168f_2 to set RTL8168F rev.B ephy parameters, instead of using function rtl_hw_start_8168f_1. Signed-off-by: Chunhao Lin <h...@realtek.com> --- drivers/net/ethernet/realtek/r8169.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index b8a097c..d62f8d8 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5867,6 +5867,26 @@ static void rtl_hw_start_8168f_1(struct rtl8169_private *tp) RTL_W8(EEE_LED, RTL_R8(EEE_LED) & ~0x07); } +static void rtl_hw_start_8168f_2(struct rtl8169_private *tp) +{ + void __iomem *ioaddr = tp->mmio_addr; + static const struct ephy_info e_info_8168f_2[] = { + { 0x09, 0x0000, 0x0080 }, + { 0x19, 0x0000, 0x0224 }, + { 0x00, 0x0000, 0x0008 }, + { 0x0c, 0x3df0, 0x0200 } + }; + + rtl_hw_start_8168f(tp); + + rtl_ephy_init(tp, e_info_8168f_2, ARRAY_SIZE(e_info_8168f_2)); + + rtl_w0w1_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0c00, 0xff00, ERIAR_EXGMAC); + + /* Adjust EEE LED frequency */ + RTL_W8(EEE_LED, RTL_R8(EEE_LED) & ~0x07); +} + static void rtl_hw_start_8411(struct rtl8169_private *tp) { static const struct ephy_info e_info_8411[] = { @@ -6276,9 +6296,11 @@ static void rtl_hw_start_8168(struct net_device *dev) break; case RTL_GIGA_MAC_VER_35: - case RTL_GIGA_MAC_VER_36: rtl_hw_start_8168f_1(tp); break; + case RTL_GIGA_MAC_VER_36: + rtl_hw_start_8168f_2(tp); + break; case RTL_GIGA_MAC_VER_38: rtl_hw_start_8411(tp); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/