rtl8168evl may return to PCIe L0 from PCIe L0s low power mode too slow.
The following ephy parameters are for this issue.
{ 0x0c, 0x0100, 0x0020 }
{ 0x10, 0x0004, 0x0000 }
Signed-off-by: Chunhao Lin <h...@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c
b/drivers/net/ethernet/realtek/r8169.c
index 48d1f78..1874583 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5778,7 +5778,9 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private
*tp)
struct pci_dev *pdev = tp->pci_dev;
static const struct ephy_info e_info_8168e_2[] = {
{ 0x09, 0x0000, 0x0080 },
- { 0x19, 0x0000, 0x0224 }
+ { 0x19, 0x0000, 0x0224 },
+ { 0x00, 0x0000, 0x0008 },
+ { 0x0c, 0x3df0, 0x0200 }
};
rtl_csi_access_enable_1(tp);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
