On 2015-01-06 at 03:19:33 +0100, th...@altera.com <th...@altera.com> wrote:
[...]
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 633ec21..e38beff 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -156,6 +156,14 @@ config GPIO_DWAPB
> Say Y or M here to build support for the Synopsys DesignWare APB
> GPIO block.
>
> +config GPIO_ALTERA
> + tristate "Altera GPIO"
> + depends on OF_GPIO
> + help
> + Say Y or M here to build support for the Altera PIO device.
> +
> + If driver is built as a module it will be called gpio-altera.
Indentation looks odd. The tristate, depends and help lines should be
indented by a tab and the help text should be indented by a tab followed
by two spaces.
> +
> config GPIO_IT8761E
> tristate "IT8761E GPIO support"
> depends on X86 # unconditional access to IO space.
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 81755f1..239b28b 100644
[...]
> diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
> new file mode 100644
> index 0000000..a57b7ab
> --- /dev/null
> +++ b/drivers/gpio/gpio-altera.c
[...]
> +int altera_gpio_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + int id, reg, ret;
> + struct altera_gpio_chip *altera_gc;
> +
> + altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
> + if (!altera_gc)
> + return -ENOMEM;
> +
> + spin_lock_init(&altera_gc->gpio_lock);
> +
> + id = pdev->id;
id is assigned but never used.
> +
> + if (of_property_read_u32(node, "altr,ngpio", ®))
> + /*By default assume full GPIO controller*/
Spaces missing after /* and before */
> + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
> + else
> + altera_gc->mmchip.gc.ngpio = reg;
> +
> + if (altera_gc->mmchip.gc.ngpio > 32) {
Why the magic number 32 here? Better use ALTERA_GPIO_MAX_NGPIO as well.
> + dev_warn(&pdev->dev,
> + "ngpio is greater than %d, defaulting to %d\n",
> + ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
> + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
> + }
> +
> + altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input;
> + altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output;
> + altera_gc->mmchip.gc.get = altera_gpio_get;
> + altera_gc->mmchip.gc.set = altera_gpio_set;
> + altera_gc->mmchip.gc.owner = THIS_MODULE;
> + altera_gc->mmchip.gc.dev = &pdev->dev;
> +
> + ret = of_mm_gpiochip_add(node, &altera_gc->mmchip);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, altera_gc);
> +
> + altera_gc->mapped_irq = platform_get_irq(pdev, 0);
> +
> + if (altera_gc->mapped_irq < 0)
> + goto skip_irq;
> +
> + if (of_property_read_u32(node, "altr,interrupt-type", ®)) {
> + ret = -EINVAL;
> + dev_err(&pdev->dev,
> + "altr,interrupt-type value not set in device tree\n");
> + goto teardown;
> + }
> + altera_gc->interrupt_trigger = reg;
> +
> + ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0,
> + handle_simple_irq, IRQ_TYPE_NONE);
> +
> + if (ret) {
> + dev_info(&pdev->dev, "could not add irqchip\n");
> + return ret;
> + }
> +
> + gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc,
> + &altera_irq_chip,
> + altera_gc->mapped_irq,
> + altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ?
> + altera_gpio_irq_leveL_high_handler :
> + altera_gpio_irq_edge_handler);
> +
> +skip_irq:
> + return 0;
> +teardown:
> + pr_err("%s: registration failed with status %d\n",
> + node->full_name, ret);
> +
> + return ret;
> +}
> +
> +static int altera_gpio_remove(struct platform_device *pdev)
> +{
> + struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
> +
> + gpiochip_remove(&altera_gc->mmchip.gc);
> +
> + irq_set_handler_data(altera_gc->mapped_irq, NULL);
> + irq_set_chained_handler(altera_gc->mapped_irq, NULL);
> + return -EIO;
> +}
> +
> +static const struct of_device_id altera_gpio_of_match[] = {
> + { .compatible = "altr,pio-1.0", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
> +
> +static struct platform_driver altera_gpio_driver = {
> + .driver = {
> + .name = "altera_gpio",
> + .owner = THIS_MODULE,
No need to set this here, platform_driver_register will take care of it.
> + .of_match_table = of_match_ptr(altera_gpio_of_match),
> + },
> + .probe = altera_gpio_probe,
> + .remove = altera_gpio_remove,
> +};
> +
> +static int __init altera_gpio_init(void)
> +{
> + return platform_driver_register(&altera_gpio_driver);
> +}
> +subsys_initcall(altera_gpio_init);
> +
> +static void __exit altera_gpio_exit(void)
> +{
> + platform_driver_unregister(&altera_gpio_driver);
> +}
> +module_exit(altera_gpio_exit);
> +
> +MODULE_AUTHOR("Tien Hock Loh <th...@altera.com>");
> +MODULE_DESCRIPTION("Altera GPIO driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.11.GIT
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
